PR-12 — 12Volt Antenna Rotator for Portable Operation
Antenna rotator for 12V battery operation. The PR-12 consists of two parts: the actual rotator, which despite its small size is able to rotate light 3-element portable beam, and the separate control unit with operating elements and LC display. The rotator has a rotation time of 1 minute and is driven by a self-locking worm gear. The motor is PWM controlled for smooth starting and stopping.
Inside the control unit a microcontroller works, it polls the operating elements, controls the motor and beam direction and shows other information on the display. Individual parameters like directional calibration are permanently saved even after power off. The rotator can be controlled remotely via USB interface; for remote control the Yaesu interface 'GS-232' is emulated, which is supported by most logging programs. The software is updated via USB interface, too. Special emphasis was placed on the fact that the motor control does not cause any radio interference.
The device is operating with 12V, power consumption during rotation is (depending on load) about 1A, idle 40mA.
It comes with a 16m long control cable, USB cable as well as the DC cable, mast clamps for pipe mounting up to 40 mm diameter, a small compass as well as the English manual. Options for Buddipole antennas are available, see below.
|25200||PR-12 Antenna Rotator 12V||413.00 €||Ordina|
|25205||Carrying Bag for PR-12||34.40 €||Ordina|
|25206||Buddipole Adapter for PR-12||34.30 €||Ordina|
|25207||16m Extension Cable for PR-12||28.50 €||Ordina|
|Info sui costi di spedizione|