Decoder automatico di banda e commutatore d'antenna

La MicroHAM fornisce accessori di alta qualita' per il tuo shack da radioamatore, coem Band Decoders, vari tipi di commutatori d' Antenna Switches, dispositivi di Antenna Stacking , dispositivi speciali appositamente progettati per le tecniche operative SO2R , interfacce USB e molto altro ...

microHAM Station


The microHAM Station is the successor to the popular Band-Decoder, and offers a lot of additonal functions. With the Station you integrate a lot of devices of your shack: automatic antenna switching with the freely programmable band decoder, computer controlled rotator direction,, CAT control of your radio, switching of bandpass filters, a sequencer for amplifiers and last but not least the integration of your SteppIR antenna. With the iLink connection you can further integrate your existing soundcard interface by microHAM: works with Micro-Keyer, Micro-Keyer2, Digi-keyer, Micro-Keyer2R(+) etc.

The most control functions are derived from frequency and PTT information. This offers you 20 frequency dependent output switches to control an antenna switch (for example). Some antennas can be declared as receive only antenna, the Station will block transmitting on these antennas. Additionally a freely programmable sequencer is availabkle, for example to control the delayed switching of pre amplifiers or amplifiers.

The intelligent rotor control allows the use of nearly any rotor manufacturer and type. The position information may be an analog voltage (e.g. Yaesu, Hy-Gain) or a digital pulse (e.g. SPID). Depending on band and your individual setup the antenna will turn automatically, for example after entering just the prefix of a call or a locator (depending on your log program).

Several fixed antennas can be grouped into a 'virtual rotr', selecting the right antenna depending of the destination. This can be used with antennas like 4-Squares or Beverages.

If you use a SteppIR or Ultrabeam antenna, this can also be controlled by the Station. This has several benefits. A SteppIR antenna directly coupled to your transceiver would follow each and every frequency change, even when another antenna is in use. The Station transmits control information to the variable antenna only if it also the active antenna. Another benefit is that large split offsets can be compensated, the antenna will not retune between Tx and Rx.

With the clearly arranged controls of the Station , practically all functions can be controlled from the front panel. This makes the operation independent of a computer, provided the band limits and setup has been programmed once before.

The built-in CAT interface allows to connect nearly any radio to the computer and the log software. Already existing microHAM interfaces can be integrated with the iLink port. The required 'iLink' cable (both sides 6p MiniDIN, 1:1) is included in shipment. Offriamo un 10 tasti tastiera MK-KEYPAD opzionale, vedi sotto.


Station Features

  • General
  • Programmable Antenna, BPF, Rotor and PA controller
  • Twenty (20) programmable relay outputs
  • Integrated level converter for transceiver computer control port
  • Decodes all frequencies of connected transceiver, including 75m, 6m, VHF and UHF
  • Unlimited number of custom defined frequency segments 'bands”
  • Single USB connection to computer
  • Stand alone operation
  • Internal Rotator control
  • Virtual Rotators function
  • Separate RX/TX antenna support
  • Automatic Antenna Scan function
  • Separately programmable up to 20 outputs sequencer
  • Automatic power amplifier support
  • Fully compatible and simple integrated with microHAM 'keyers” MK, DK, CK, MKII and MK2R
  • Proprietary SteppIR support for automatic tunning and protection
  • Hot Switch protection with user defined timing
  • TX Inhibit support for Yaesu's transceivers
  • Receive only antennas support
  • Optical isolation from computer
  • PS/2 keyboard or keypad with dual control of Station and microHAM 'keyer”
  • Integrated chokes and filters for maximum RFI immunity
  • Metal/Aluminum case, powder coated and silk screened
  • Free, no time limit firmware/software upgrades via Internet
  • CAT control
  • Integrated level converter for CI-V, FIF-232, IF-232, or RS-232
  • Up to 57600 Baud with fake handshake support
  • Supports most Elecraft, Icom, Kenwood, Ten-Tec, Yaesu and other radios
  • Antenna control (Port A):
  • Ten (10) programmable relay outputs
  • Configurable power for common
    • ground
    • 13.8V positive
    • external power, max. + 24V
  • Compatible with all remote antenna switches using common ground or positive control
  • Additional Antennas or BPF Control (Port B):
  • Six (6) programmable relay outputs
  • Configurable power for common
    • ground
    • 13.8V positive
    • external power, max. + 24V
  • Compatible with all automatic BPF on the market
  • RX Antennas and TX Sequencer (Port B):
  • Four (4) programmable relay outputs
  • Both poles of relay contact available
  • Independent settings of Lead and Tail delay for each sequencer output
  • Internal Rotator Control:
  • Three (3) programmable relay outputs
  • Both poles of relay contact available
  • Configurable support for BRAKE or SPEED control
  • Support for multi-turn rotators
  • Support for rotators with analog (pot) or discrete (pulse) azimuth read back
  • Programmable software limit switches
  • Dead zone definition
  • Target finding strategy selection for optimal handling
  • Support for 'slipping” rotators
  • Four memories for most wanted azimuths
  • Automatic azimuth control from logger
  • Virtual Rotator Control:
  • Unlimited number of antennas can be joined to Virtual Rotator
  • Programmable azimuth ranges for each Virtual Rotator antenna
  • Automatic azimuth control from logger
  • Unlimited number of Virtual Rotators per Band
  • Power Amplifier Control:
  • Automatic tunning for CI-V controlled automatic amplifiers (Icom PW1, Expert SPE, Tokyo Hy-Power)
  • Automatic band switching for BCD controlled amplifiers (Yaesu VL-1000, FL-7000)
  • Support for QSK Power Amplifiers
  • Weight and Size:
  • Weight 950g
  • 230 x 130 x 45 mm (without protruding parts)
Ordine No.
MICRO-SM microHAM Station 369.00 € Ordina
Info sui costi di spedizione

Special Cables for Station

Ordine No.
PA-ACOM-2000 Cable per Acom-2000A 77.50 € Ordina
PA-EXP-1KFA Cable per Expert 1K-FA 53.50 € Ordina
PA-VL-1000 Cable per Yaesu VL-1000 53.50 € Ordina
FT-INH-DIN8 'Inhibit' Cable Yaesu 18.00 € Ordina
PA-PW1-HL Cable per Icom PW-1 53.50 € Ordina
ROT-DXA-DXC Cable per rotori Yaesu DXA/DXC 65.50 € Ordina
Info sui costi di spedizione

List of CAT cables for CW-keyer & Station

Ordine No.
CWK-CIV Cavo CAT per tutte l'unita Icom con CI-V (List) 17.90 € Ordina
CWK-IF232 Cavo CAT per diverso Kenwood (List) 17.90 € Ordina
CWK-RS232-KY Cavo CAT per diverso Kenwood and Yaesu (List) 17.90 € Ordina
CWK-DIN Cavo CAT per diverso Yaesu (List) 17.90 € Ordina
CWK-MINI6 Cavo CAT per diverso Yaesu (List) 17.90 € Ordina
CWK-MINI8 Cavo CAT per diverso Yaesu (List) 17.90 € Ordina
CWK-RS232-T Cavo CAT per Yaesu, TenTec etc. (List) 17.90 € Ordina
CWK-RS232-YX Cavo CAT per Yaesu FT-847 17.90 € Ordina
CWK-RS232-E Cavo CAT per Elecraft 17.90 € Ordina
CWK-RS2322ST Cavo CAT per TenTec Omni V 17.90 € Ordina
Info sui costi di spedizione

CW-KEYER Lista di cavi CAT

CWK-CIV Icom tutti gli Icom con interfaccia CI-V, TenTec Omni VI, VI+  
CWK-IF232 Kenwood TS-50, TS-60, TS-140, TS-440, TS-450, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-940, TS-950
TS-50, TS-60: richiede IF-10D
TS-140, TS-680: richiede IF-10C
TS-711, TS-811: richiede IF-10A
TS-940: requires IF-10B
 
CWK-RS232-KY Kenwood/Yaesu TS-480, TS-570, TS-590S, TS-870, TS-2000
FT-1000MP / MARKV / Field, FT-2000, FT-950, FT-DX3000
 
CWK-DIN Yaesu FT-736, FT-747, FT-767, FT-980, FT-990, FT-1000, FT-1000D
FT-990: richiede ROM version 1.3
FT-1000/1000D: richiede ROM version 6.0
 
CWK-MINI6 Yaesu FT-757GX-II, FT-840, FT-890, FT-900  
CWK-MINI8 Yaesu FT-100, FT-817, FT-857, FT-897  
CWK-RS232-T Yaesu,TenTec FT-920, TEN TEC Argonaut V, Jupiter, Orion, Pegasus  
CWK-RS232-YX Yaesu FT-847  

10-Keypad

10er Tastatur

Il '10 Keypad ' e' connesso direttamente al microKEYER e permette il controllo di varie funzioni CW , come il richiamo di buffers memorizzati , la regolazione della velocita' e molto altro.Le funzioni RTTY richiedono una tastiera full PS/2 (una tastiera USB non potra' funzionare !).

Ordine No.
MK-KEYPAD 10 keypad 25.40 € Ordina
Info sui costi di spedizione

Commutatori d'antenna microHAM



Commutatori d'antenna controllati da remoto per 6 o 10 antenne

I commutatori d'antenna della microHAM sono stagni per il montaggio su mast, ma possono anche operare nello shack .I commutatori possono esere controllati dal "micoHAM band decoder" (vedi sopra,con 5m di cavo incluso) o altri band decoders.La PCB del commutatore e' uno speciale proggetto HF con striplines,e usa stubs individuali per ottimizzare l'SWR e la minima perdita di inserzione.Le antenne non usate sono messe a massa , e anche quando l'unita' e' spenta. Il robusto contenitore in fusione di alluminioco spessore di 4mm. garantisce un ottimo isolamento dalle interferenze RF (classe IP66). Normalmente sono forniti con PL jack (femmina), ma sono opzionalmente disponibili anche gli N jacks .Gli Switches sono disponibili nelle configurazioni 1-a-6, 2-a-6 o 1-a-10 .



 
Typ micro Six Switch micro DoubleSix Switch micro Ten Switch
No. di radio 1 2 1
No. di antenne 6 6 10
Gamma di frequenze 0 - 60MHz 0 - 30MHz 1.7 - 60MHz
Impedanza 50Ω 50Ω 50Ω
Tensione relè +9 a +16V +9 a +16V +9 a +16V
Consumo mass. di corrente max. 80mA max. 180mA max. 80mA
Misura 220 x 103 x 120mm 220 x 103 x 120mm 220 x 103 x 120mm
Peso senza mounting bracket 2.2kg 2.4kg 2.4kg
Campo di temperatura -35° a +70°C -35° a +70°C -35° a +70°C
Potenza mass. (CW)
1.8 a 30MHz
5KW a SWR 1:1.3
3KW a SWR 1:2
2KW a SWR 1:3
5KW a SWR 1:1.3
3KW a SWR 1:2
2KW a SWR 1:3
5KW a SWR 1:1.3
3KW a SWR 1:2
2KW a SWR 1:3
Potenza mass. (CW)
30 a 60MHz
1.5KW a SWR 1:3 - 1.5KW a SWR 1:3
SWR a 1.8MHz
14MHz
28MHz
50MHz
1.00
1.03
1.07
1.12
1.03
1.03
1.06
-
1.00
1.01
1.02
1.06
Perdita di inserzione a 1.8MHz
14MHz
28MHz
50MHz
<0.01
<0.01
<0.02
<0.05
<0.01
<0.03
<0.05
-
<0.01
<0.02
<0.04
<0.07
Isolamento a 1.8MHz
14MHz
28MHz
50MHz
>80 dB
>64 dB
>58 dB
>50 dB
85 - 115 dB
65 - 100 dB
60 - 90 dB
-
>75 dB
>61 dB
>55 dB
>47 dB
Ordine No.
(PL-jack)
Micro-6SW
374.00 € Ordina
Micro-DUO6SW
555.00 € Ordina
Micro-10SW
425.50 € Ordina
Ordine No.
(N-jack)
Micro-6SW-N
446.00 € Ordina
Micro-10SW-N
535.00 € Ordina