EAntenna Cobweb

Cobweb - 5 Band Antenna, Design by G3TPW Nouveau

EAntenna Cobweb

The Cobweb antenna is a antenna which is easy and fast to install for portable operations, designed by G3TPW.

The Cobweb antenna covers the five upper shortwave bands 20, 17, 15, 12 and 10m. One common balun feeds five dipoles which are folded in a roughly square shape, only one feedline is required. Due to the arrangement of the antenna elements and some ground effect the gain is slightly higher than for a dipole alone.

The antenna is built for a maximum power of 500W. The useable 2:1 SWR bandwidth covers a large part of each band. The frequency of the SWR minimum can be tuned by changing the length of the dipoles. Due to the square arrangement of the dipoles the overall size is very small, just 280 by 280 cm. Equally the wind surface is rather small, allowing a max. windspeed of 160 km/h. The base plate as well as the tube supporting the balun is made from aluminium, the tubes carrying the dipoles are made from glass fibre. The weight of the Cobweb is just 4.8 kg, this is convenient if the antenna is to be installed by a single person. A lightweight aluminium mast is sufficient to carry the antenna. These small sizes and the small packing size of 11 x 11 x 100 cm makes this antenna well suitable for vacations, fielddays, SOTA and other portable activities. Connector PL.

Dates techniques 11406 Cobweb
Bandes radio amateur 20, 17, 15, 12, 10 m
Puissance maxi 500 W
Radius maxi de rotation 1.96 m
Poids 4.8 kg
Dimensions (transport) 11 x 11 x 100 cm
Diamètre du mât 32 - 52 mm
Gain [1] 20 m 7 dBi
17 m 7 dBi
15 m 7 dBi
12 m 7 dBi
10 m 7 dBi
Largeur de bande 2:1 SWR 20 m 208 kHz
17 m 170 kHz
15 m 167 kHz
12 m 156 kHz
10 m 184 kHz
Largeur de bande 3:1 SWR 20 m 362 kHz
17 m 299 kHz
15 m 293 kHz
12 m 271 kHz
10 m 337 kHz

[1] Gain when installed 10m above ground.

Référence
11406 EAntenna Cobweb Antenna 329.00 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
Info frais de port