Material for securing antenna masts (Guy ropes etc.)

Screw Tent Pegs

Various options to install the peg Various options to mount the peg

Screw Tent pegs offer a better alternative to fasten guy wires of masts, tents, pavillions and much more! These screw pegs offer a much stronger fixation to ground than traditional pegs and can be installed easily with cordless screwdrivers or even manually.

The 8 mm sideways hole in the head of the screw peg is suited for installation of a shackle (see 23010.08) or a rope. You can also use a solid screw driver as a lever to drive the screw into ground manually.


Screw Tent Peg 320 mm with crosswise hole

The screw peg is made from UV resistant, glass fibre reinforced polyamide, it is especially suitable for sandy and soft grounds, even under stormy conditions. Drive the screw peg into ground with a size 24 spanner socket, a size 24 flat wrench or with a large screwdriver (used as lever through the 8 mm hole). Used for guying a small tent or portable mast. A shackle is useful for easy fixation of guy ropes, see 23010.08.


Référence
23200 Screw Tent Peg Polyamide 6.80 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
Info frais de port

Screw Tent Peg 300mm, Aluminium, with crosswise hole

The screw tent peg can be driven on it's full length into ground by means of a strong tool, the hardened version is even capable of displacing small stones. Drive the screw peg into ground with a size 24 spanner socket, a size 24 flat wrench or with a large screwdriver (used as lever through the 8 mm hole). Used for tents or portable masts. A shackle is useful for easy fixation of guy ropes, see 23010.08.


Référence
23205 Screw Tent Peg 300mm, Aluminium 12.80 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
23210 Screw Tent Peg 300mm, hardened Aluminium 16.90 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
Info frais de port

Accessories for Screw Tent Pegs

Hook Plate for Screw Pegs

This versatile hook plate is intended for use with the screw tent pegs order no. 23200, 23205 and 23210 and offers a perfect fixation point on the peg, regardless on how deep the peg is driven into ground. The hook plate can be fastened in any height and offers various options to attach ropes, tubes, tent feet and much more! Suitable for grommets of up to 8 mm diameter. Included in shipment are two pieces.

Référence
23220 Hook Plate for Screw Tent Pegs (2 pieces) 9.50 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
Info frais de port

Shackle, 8mm, stainless steel

Schäkel 8mm, Edelstahl 8 mm shackle, inox

This stainless steel shackle is used to connect grommets, rings, s-hooks, carabiner hook, belts and other material. This shackle is very well suited for the tent pegs with the 8 mm crosswise hole. THis shackle does not fit under the heads of the pegs, it is too large for that purpose.


Référence
23010.08 8 mm Shackle, stainless steel 4.80 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
Info frais de port

Becket (grommet) for Tent Pegs

Seilöse für Schraubhaeringe Becket for tent pegs

Becket to be used with tent pegs, for fastening of ropes. One pack includes set of four (4) pieces.


Référence
23230 Rope Becket for tent pegs (4 pcs.) 6.40 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
Info frais de port

Sapnner socket 24 mm with adaptor

Nuss 24 mm mit Bit-Adapter 24 mm spanner socket

24 mm spanner socket with long hex adaptor, used to screw tent pegs into ground with the help of a power drill.


Référence
23240 Spanner socket 24 mm with hex adaptor 9.95 € Acheter Nouveau En stock, expedié sous 1 à 2 jours.
Info frais de port

Guy ROpes, Guy Wires

Dyneema guy rope


Dyneema rope, only 3 mm thick and very unobtrusive. High breaking load of 400 Kg! Pre-stretched, only minimal strechting when wet.
Référence
23100 Dyneema, per meter 1.50 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

PES guy rope



Braided PES guy rope, 5 mm with 420kg breaking load. Low strecht, weather proof, UV resistant.
Référence
23102 per meter 0.50 € Acheter En stock, expedié sous 1 à 2 jours.
23102.100 100m coil 46.20 € Acheter En stock, expedié sous 1 à 2 jours.
23102.200 200m coil 86.20 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Nylon Monofil guy wire



Nylon Monofil is a new type of guy wire for antennas and masts. Monofil is not braided buit one solid wire of nylon, extremely solid, extremely low stretch, breaking load of the 5 mm wire is 700kg! But still lightweight and weatherproof and due to the white color quite unobtrusive. For even higher breaking loads use several wires in parallel. Can be fitted with the usual mounting hardware.
The 2 mm version can be used to brace antennas etc.

Technical Data 5 mm Monofil (23101.x):
  • Material: 6 SNIA Nylon
  • Specific weight: 1.14 g/cm³
  • Specific breaking load: 35-40 kg/mm²
  • Breaking stretch: 15-20%
  • Diameter: 2 mm or 5 mm
  • Breaking load: 120 kg (2mmØ), 700 kg (5mmØ)
Référence
23101.5 5mm, per meter 0.90 € Acheter En stock, expedié sous 1 à 2 jours.
23101.5-50 5mm, 50m coil 43.50 € Acheter En stock, expedié sous 1 à 2 jours.
23101.5-100 5mm, 100m coil 83.50 € Acheter En stock, expedié sous 1 à 2 jours.
23101.2-25 2mm, 25m coil 15.00 € Acheter En stock, expedié sous 1 à 2 jours.
23101.2-50 2mm, 50m coil 30.00 € Acheter En stock, expedié sous 1 à 2 jours.
23101.2-100 2mm, 100m coil 60.00 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Light guy rope


Light rope with 3 mm diameter, suitable for guying lines of masts and verticals. Nearly invisible, UV resistant black polyester, 16 times braided, low stretch, breaking load 150kg, available as 30 or 60m coil.
Référence
23105.30 30m coil Polyester rope, black 15.00 € Acheter En stock, expedié sous 1 à 2 jours.
23105.60 60m coil Polyester rope, black 30.00 € Acheter Pas de stock, expedition le 20. May. 2017
Info frais de port

Steel guy wire



Steel guy wire, 6 mm diameter, braided 6x7 wires, 13mm² cross section. Statical breaking load approx. 21kN (approx. 2 tons).
Référence
23106 1.90 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Guy wire kit


For guying of masts or antennas. Kit consists of one guying clamp (30-50 mm diameter) and 30 or 60m black 3 mm DACRON rope (polyester) with a breaking load of 120kg.
Référence
11340 30m kit 35.70 € Acheter En stock, expedié sous 1 à 2 jours.
11341 60m kit 53.70 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Clamps, Locks, Brackets

Guy wire thimble


Référence
23020.03 3mm, galvanised 0.50 € Acheter En stock, expedié sous 1 à 2 jours.
23020.04 4mm, galvanised 0.50 € Acheter En stock, expedié sous 1 à 2 jours.
23020.06 6mm, galvanised 0.80 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Guy wire clamps


For security reasons we recoomend the use of two clamps one each end.

Référence
23025.03 3mm, galvanised 0.50 € Acheter En stock, expedié sous 1 à 2 jours.
23025.06 6mm, galvanised 0.50 € Acheter En stock, expedié sous 1 à 2 jours.
23025.08 8mm, galvanised 0.80 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Wire clamps


Wire clamp 3mm, stainless steel
Référence
23060 Simplex 1.10 € Acheter En stock, expedié sous 1 à 2 jours.
23060.D Duplex 1.99 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Guy wire clamp



for Nylon rope, rope diameter 3.5-8 mm
Référence
23061 1.20 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Guy wire tightener


Référence
23011 6mm, galvanised 2.90 € Acheter En stock, expedié sous 1 à 2 jours.
23012 8mm, galvanised 3.60 € Acheter En stock, expedié sous 1 à 2 jours.
23013 10mm, galvanised 5.60 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

S hook for rope tightener


Référence
23015 1.00 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port

Guy clamp


Smart construction which finally avoids that the guy wires and antenna cables get entangled. That happens most often at the topmost guying.
Solid metal disc, the gap for the cable guide is wide enough (25mm) to accomodate most rotor connectors. The same product can be used to guy a mast in several heights: included in the shipment are bushings for 50, 40, 30 and 20 mm mast diameter. Of course the mast can still be rotated ín the guy clamp.

Référence
23050 Guy Clamp 38.50 € Acheter En stock, expedié sous 1 à 2 jours.
Info frais de port