Icom Mobile Transceiver

Icom IC-7100

IC-7100

The new ICOM IC-7100 is a 100 W transceiver for short wave, 50MHZ, 70MHZ, 144MHZ and 430MHZ with remote control panel, D-Star and touch display.

At first the new 48.6 mm x 75.9 mm wide Touch Screen falls on on this transceiver. Contrary to the IC-7000, this is not in color on the IC-7100. The most important functions can be quickly and easily accessed by directly touching the menu items on the display. Also, the input frequency can be done directly on the display with a keypad that appears.

The Control Panel has for the first time a form to get it right on the the station table. The display is arranged obliquely here. Additional brackets to read the display properly are not necessary. When mounting in a car optional brackets are available. On the dashboard or center console allows the control panel mount with this intuitive and does not distract the attention of the driver. In addition to the touch panel can be found on the front panel the necessary buttons and controls. The microphone is connected direct on the rear side of the control panel. A loud, powerful speaker located on the back of the control unit.

The Transmitter sweeps all shortwave bands from 160m to 10m and in addition 50 Mhz with an output power of 100W. At 70MHZ and 144 MHz, the IC-7100, has an output power of 50 W and at least on 70cm delivers the transmitter 35 W Output.
A 32bit IF-DSP in the Receiver works in the shortwave bands, on VHF/UHF too and provides the functions such as PBT, Noise Reduction, CW autotune and more. The receiver operates continuously from 0.03 - 199.999MHz and 400 - 470MHz in all types of modulation (WFM RX only).


IC-7100 Rear view

In the IC-7100 all components for D-Star operation are already installed. The device has an internal repeater list, which can be accessed quickly and easily through the touch panel. With an external GPS receiver, the IC-7100 can also automatically select the nearest relay from that list. Easier and more comfortable as it gets almost. Ensure that all settings are always available, the IC-7100 provides the ability to save the settings to an SD card.

For the digital modes, the IC-7100 is through its diverse connectivity options the ideal companion. Besides the classical CI-V interface is even including a USB port for connecting to the computer. Furthermore, is with the optional remote control software RS-BA 1, a tool available to completely operate this transceiver remotely and over the Internet.

  • Other properties:
  • CW full break-in
  • CW reverse
  • CW Auto Tuning
  • Band Scope
  • DSP Speech Processor
  • Voice Memory
  • Multi function meter
  • 12 kHz IF Output for DRM
  • Scope of delivery:
  • Hand-Microphone HM-198
  • Separation cable OPC-2253
  • DC-Power Cord
  • 13-pol. ACC connector
  • CW-Key connector
  • USB-Cable
  • Spare Fuses
Ordine No.
IC-7100 ICOM IC-7100 Transceiver with D-Star 1199.00 € Ordina
Info sui costi di spedizione

Accessoirees for IC-7100

Ordine No.
HM-151 Remote microphone 76.00 € Ordina
HM-36 Hand micophone (needs OPC-589) 56.50 € Ordina
SM-30 Desktop microphone (needs OPC-589) 159.00 € Ordina
SM-50 Deluxe-Desktop microphone (needs OPC-589) 269.00 € Ordina
MBF-1 Sostegno per Control Unit (utilizza MBA-1 o MBA-2) 54.50 € Ordina
MBA-1 Control panel mount 16.50 € Ordina
MB-62 Mobile mount 19.50 € Ordina
OPC-2253 Separation cable 3,5m 55.00 € Ordina
OPC-2254 Separation cable 5m 74.50 € Ordina
OPC-1529R Data cable seriell 27.80 € Ordina
AH-4 Automatic antenna tuner 439.00 € Ordina
WCS-7100 Programming Kit for IC-7100 (Software only) 32.10 € Ordina
CS-7100 Icom Programming Software 59.00 € Ordina
RS-BA1 Icom Remote Control Software 79.90 € Ordina
RC-28 Remote Control Unit 215.00 € Ordina
RC-28 Remote Control Unit 215.00 € Ordina
Info sui costi di spedizione