IC-7410 Shortwave/6m Allmode Transceiver 6m
Based on the successes with the model IC-7400 and IC-7600 Icom offers the IC-7410 as a new midrange DSP shortwave transceiver. The IC-7410 works on all shortwave bands plus 6m, and supports all modes. The receiver design uses a new DSP of the latest generation which is faster the previous models. The new AD/DA converter has a larger dynamic range which results an improved signal to noise ratio, The receiver is designed as a double superheterodyne and offers an excellent IP3 of +30dBm. Three switchable 1. IF filters (roofing filters) also help in achieving this good result (15 kHz filter installed, 3 and 6 kHz filters optional).
Icoms long experiences of DSP based transceivers result in many advantages for the radio amateur. Digital filters offer just the right bandwidth for the current situation, Twin Passband Tuning helps to eliminate unwanted signals. The AGC is integrated into and controlled by the DSP loop, which prevents receiver blocking by nearby strong signals. This is further supported by an automatic or manual notch filters. Other DSP functions are a noise reduction system and a very effective noise blanker. But the DSP is also used on the transmit side: adjustable compression, transmit bandwidth and an equalizer are all handled by the DSP.
The transmitter offers a full 100 W output power (27 W AM), adjustable down to min. 2W. A TCXO (temperature controller crystal oscillator) is already installed for best frequency stability. The internal tuner matches any coax fed antenna from 16 to 150Ω. The large LC display (slightly larger than on the IC-7400) offers all information at a glance, and makes the menu system very easy to use. It displays memory names, a simple bandscope or RTTY decoded text. A USB interface is built in and provides all means to get started in digital modes, without the need of an additional soundcard interface (in most cases). The CAT interface (by USB or traditional CI-V) offers full remote capabilities. With the optional RS-BA1 software the IC-7410 can even be remote controlled over the internet.
This radio is out of production since February of 2017. We show it here for orientation purposes and to show the still available accessories.
Accessories Icom IC-7410
Icom RS-BA1 Remote Control Software
This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.
|RS-BA1||Remote Control Software||Add to shopping cart||Not in stock, back on: 23. May. 2018 ⓘ|
|RC-28||Remote Control Unit||Add to shopping cart||Not in stock, back on: 05. Jun. 2018 ⓘ|
|Info freight charges|
Icom Desk Microphones
Elegant and light gooseneck microphone with Electret element, for all Icom transceivers with 8pin round Mic socket (Foster socket). Base with keys for PTT and PTT-Lock. The microphone level can be adjusted by a small potentiometer at the lower side of the base, which also locates a slider for 'low cut'. The microphone can be adjusted in height and direction with the flexible gooseneck, the 1m long, straight cable is included.
|SM-30||Icom Desk Microphone SM-30||Add to shopping cart||In stock, shipped in 1 or two days. ⓘ|
|Info freight charges|
Large gooseneck desktop microphone with Electret element, for all Icom transceivers with 8pin round Mic socket (Foster socket). Heavy base with keys for PTT and PTT-Lock, plus keys for Up and Down (changes frequency or memory, function depending on radio), plus easily accessible key for 'low cut'. The microphone level is adjustable by a small potentiometer on the lower side of the base. The microphone can be adjusted in height and direction with the flexible gooseneck, the 1m long, straight cable is included.
|SM-50||Icom Desk Microphone SM-50||Add to shopping cart||In stock, shipped in 1 or two days. ⓘ|
|Info freight charges|
Frequency Extension for RadiosPlease note:
All radios supplied by WiMo normally cover only the amateur bands (transmit wise).
The frequency extension of a radio (TX open) is done on explicit request by the customer.
Amateur Radio transceivers are usually not specified for use outside the amateur bands. In some cases the radio and especially the final amplifier or output filters can be damaged when transmitting outside the amateur bands. These damages are not covered by any warranty.
The manufacturer warranty might be voided in some cases as well.