IC-9100 Transceiver for Shortwave + VHF + UHF, Allmode + Satellite


IC-9100 Transceiver for Shortwave + VHF + UHF, Allmode + Satellite

  • All Bands: HF + 6m + 2m + 70cm + 23cm [1]
  • All Modes: SSB + AM + FM + D-Star + Satellite [2]
  • Just one Radio: IC-9100

The IC-9100 combines Icom experiences of many years in one radio. The shortwave receiver has inherited many features of the top radios: selectable roofing filters [3], doble super heterodyne receiver, IF DSP, two separate receivers and much more. Plus the well renowned tradition of Icoms V/UHF radios - now all in one radio.

Two independent receivers allow operation on two different bands, for example on shortwave + VHF or UHF, or VHF + UHF. In front of the first IF stage up to three selectable roofing filters reduce the bandwidth offered to the next stage. A 15 kHz roofing filter comes installed, optionally a 6 kHz or 3 kHz filter can be installed. Especially the narrow filters enhance selectivity on HF and 50MHz. Each receiver has it's own DSP which supports functions like IF filtering, notch filters, AGC control,pas band tuning, noise reduction and much more.

The transmitter offers a full power of 100 W on HF, 50MHz and 144MHz, 75 W on 430MHz and 10 W on 23cm with the optional 23cm module. An automatic antenna tuner for HF/50MHz is built in. The UT-121 D-Star option open the world of state of the art digital modulation on VHF an UHF, but also available on 28 and 50MHz. Together with the D-Star module comes the possibility to receive distance and position information from remote stations. Your own position is received by an optional GPS antenna or can be entered manually.

Also for the communication to the external world Icom uses well-proven and state of the art technology: the CI-V CAT interface, in use since more than 20 years is still available as well as a powerful USB socket. This USB socket offers not only CAT and remote control functions but also an audio interface. This turns the radio into a modem, it act's as an external soundcard to the computer. No more interface hassle required to get started with all computer-based modes! To decode RTTY you don't even need a computer at all, the IC-9100 does this internally.

Here you will find a preliminary datasheet of the IC-9100 (PDF, english).

[1]: Operation on 23cm requires the optional UX-9100 module
[2]: D-Star operation requires the optional UT-121 module
[3]: 15 kHz Roofing filter installed, 6 kHz and 3 kHz optional
Order No.
IC-9100 HF/50MHz/VHF/UHF Transceiver 3179.00 € Buy now
99FREQGROSS Frequency Extension Please see note! 40.00 € Buy now
Info freight charges

Accessories IC-9100

The IC-9100 accepts most known accessories by Icom and other suppliers. The transceiver has a 13-pin ACC socket, just like the IC-706, IC-7000, IC-7200 and IC-718.

Order No.
UX-9100 23cm Modul for IC-9100 649.00 € Buy now
CS-9100 Cloning/Control Software for IC-9100 59.00 € Buy now
MB-123 Carrying Handle 20.90 € Buy now
OPC-1529R Serial Remote Control cable 27.80 € Buy now
UT-121 D-Star Unit 189.00 € Buy now
FL-430 Roofing filter 6 kHz 1. ZF IC-9100 49.00 € Buy now
FL-431 Roofing filter 3 kHz 1. ZF IC-9100 49.00 € Buy now
SM-30 Desktop microphone 159.00 € Buy now
SM-50 Desktop microphone 269.00 € Buy now
42920.13 13-pin DIN connector 5.60 € Buy now
40105.070 1m cable, one side 13-pin DIN connector, other side open 10.20 € Buy now
WCS-9100 Programming Kit, for details see CAT-Interfaces 66.70 € Buy now
PS-126 25A switching power supply from ICOM 445.00 € Buy now New
Info freight charges

Here is an overview of Icom desktop speakers suitable for this radio.

Icom RS-BA1 Remote Control Software

This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.

Order No.
RS-BA1 Remote Control Software 79.90 € Buy now
RC-28 Remote Control Unit 215.00 € Buy now
Info freight charges

Frequency Extension for Radios

Please note:
All radios supplied by WiMo normally cover only the amateur bands (transmit wise).

The frequency extension of a radio (TX open) is done on explicit request by the customer.

Amateur Radio transceivers are usually not specified for use outside the amateur bands. In some cases the radio and especially the final amplifier or output filters can be damaged when transmitting outside the amateur bands. These damages are not covered by any warranty.

The manufacturer warranty might be voided in some cases as well.