Telescopic masts, Tripods and Accessories

Aluminium Telescopic Masts and Accessories


Bild Portabelmast mit Windmesser
Example of a WiMo 9m aluminium mast with a wind speed instrument.

The telescopic masts are manufactured from sideways slotted aluminum tubes; the mast can be extended to any length and securely locks into place by means of a massive clamp. The maximum allowed extended length is marked by a color ring approx. 20cm before the end of each tube. There is no fixed stop which makes it advisable to approach the marking slowly when extending the telescopes.

These masts are ideally suited for portable applications due to the low weight and the telescopic mechanism. When setting up the mast please pay special attention to the clamping length; the clamping length of the mast must be at least 1/6th of the extended length, or at least 1 meter at the minimum. When extending the mast more than 6 meters measured from the uppermost clamping point additional guys are mandatory.

The tubes are made of weather-proof aluminum alloy. The tubes are tapered by 5 mm and the tube thickness is 2mm. Please refer to the following table for weight and dimensions. The stated additional forces refer to a horizontally applied force at the tip of the extended mast - without guys and a mast clamping length of 1/6th. The calculation includes the inherent load at a wind speed of 50km/h (which is equivalent to a wind force of 7).


Order No. Price Model Transport
length [m]
Extended
length [m]
Tube
diameter [mm]
Number of
Segments
Weight [kg] Additional
force [N]
18300.4 60.70 € Buy now PM 4/1,5 1,50 4,0 30/20 3 2,2 39
18300.5XL 80.00 € Buy now PMXL 5/1,25 1,25 5,0 65/45 5 5 110
18300.6 89.30 € Buy now PM 6/1,5 1,50 6,0 40/20 5 4,0 38
18300.6XL 101.60 € Buy now PMXL 6/1,3 1,30 6,0 65/40 6 6,0 90
18300.8 108.80 € Buy now PM 8/1,5 1,50 8,0 50/20 7 6,5 38
18300.9 178.50 € Buy now PMXL 9/1,5 1,50 9,2 70/35 8 9.5 70
18300.10 145.20 € Buy now PM10/1,5 1,50 10,0 60/20 9 8,5 38
18300.10XL 195.00 € Buy now PMXL 10/1,5 1,50 10,0 70/30 9 11,5
18300.11 173.80 € Buy now PM11/1,5 1,50 11,0 65/20 10 10,0 32
18300.12 203.00 € Buy now PM12/1,5 1,50 11,8 70/20 11 11,2 30
18299 349.90 € Buy now PM16/2,7 2,70 16 65/35 7 15 22
18305.5 66.20 € Buy now PM 5,0/1,9 1,90 5,0 50/40 3 4,0 109
18305.65 101.60 € Buy now PM 6,5/1,9 1,90 6,5 55/40 4 6,0 87
18305.8 139.50 € Buy now PM 8,0/1,9 1,90 8,0 60/40 5 8,0 75
18305.95 178.30 € Buy now PM 9,5/1,9 1,90 9,5 65/40 6 11,0 68
18305.114 213.00 € Buy now PM11,4/1,9 1,95 11,4 65/35 7 13,5 65
18305.13 242.60 € Buy now PM12,8/1,9 1,95 12,8 70/35 8 15,2  
Download: Masts data sheet (PDF, EN, 643KB)


Quick Release Clamps for Portable Masts

Mast PM6XL/1.5 with 4 Quick Release Clamps

Option for the portable masts offered by WiMo. Usually these masts require a flat or socket wrench, with the quick release clamps you can raise and lower the masts without any tools.

Even with limited space these quick clamps can be easily used, because the lever can be adjusted at any position. Just pull out and release the lever, the strong spring latches the lever at the desired position. In contrast to the usual tommy screws (star grip screws) the quick release clamps allow for secure tightening of the clamp without using too much force.

How many quick release clamps are needed for a mast?
The table above shows a column "Number of Segments". The particular mast requires this number of segments minus one clamps. Example: The mast "PMXL 6/1.5 (18300.6XL)" consists of five segments, you would need four quick release clamps.

Of course older WiMo masts can be retrofitted with these quick release clamps, as well as any other mast which uses M8 screws.

Order No.
23046 M8 Quick Release Clamps for Portable Masts 5.50 € Buy now
Info freight charges

Pipe clamp

Pipe Clamp 23045.xx

Pipe clamps for portable masts etc. All clamps use an M8 screw, so the quick release clamps 23046 can be used as well.

Order No.
23045.20 20 mm Ø, galvanised 3.80 € Buy now
23045.25 25 mm Ø, galvanised 4.10 € Buy now
23045.30 30 mm Ø, galvanised 4.40 € Buy now
23045.35 35 mm Ø, galvanised 4.70 € Buy now
23045.40 40 mm Ø, galvanised 5.10 € Buy now
23045.45 45 mm Ø, galvanised 5.40 € Buy now
23045.50 50 mm Ø, galvanised 5.70 € Buy now
23045.55 55 mm Ø, galvanised 6.00 € Buy now
23045.60 60 mm Ø, galvanised 6.30 € Buy now
23045.65 65 mm Ø, galvanised 6.60 € Buy now
23045.70 70 mm Ø, galvanised 6.90 € Buy now
Info freight charges

Guy clamp

Smart construction which finally avoids that the guy wires and antenna cables get entangled. That happens most often at the topmost guying.
Solid metal disc, the gap for the cable guide is wide enough (25mm) to accomodate most rotor connectors. The same product can be used to guy a mast in several heights: included in the shipment are bushings for 50, 40, 30 and 20 mm mast diameter. Of course the mast can still be rotated ín the guy clamp.

Order No.
23050 Guy Clamp 38.50 € Buy now
Info freight charges

Mast base for vehicles, light version

Drive-on mastbase for portable masts
light model, adjustable, dismountable, yellow zinc galvanized, for smaller portable masts up to 50 mm diameter, span length 150mm, width of base 220mm, 500 mm long, incl. screws.

Order No.
18380 Drive-on mastbase, light model 65.00 € Buy now
Info freight charges

Mast base for vehicles, heavy version

Drive-on mastbase for portable masts
heavy model for larger antennas, tiltable, hot dip galvanized, mast diameter 25-50mm, span length 380mm, with sheet metal to protect the mast, carrying handle, 180 mm wide, 480 mm long, incl. screws and wingnuts, weight 6.5kg.

Order No.
18381 Drive-on mastbase, heavy model 95.00 € Buy now
Info freight charges

Mast tripods

Mast Tripods

Mast tripods are well suited for portable applications because of the ability to quickly achieve a temporary installation. The tripods are folded together in one move without any tools. When collapsed the dimensions are very compact; the diameter of the large tripods only amount to 250 mm when collapsed. The masts are fixed within the tripods by means of two large tripod heads and secured by star head screws. The tripod heads as well as the legs are made of aluminum.

Type ST1,35/70 ST1,5/70 ST2/70 ST2/90
Transport length 1,35 1,5 2 2 m
Clamping length 1,2 1,35 1,8 1,8 m
Mast diameter 25-70 25-70 25-70 50-90 mm
Weight 5 5,5 6 6,5 Kg
18320 18322 18323 18324
Order No.
18320 ST1,35/70 99.00 € Buy now
18322 ST1,5/70 109.00 € Buy now
18323 ST2/70 129.00 € Buy now
18324 ST2/90 159.00 € Buy now
Info freight charges

Guying clamp

for telescopic masts with three guying thimbles made of fibre-glass reinforced plastic. The clamps attach themselves to the tapered section of the mast thus enabling to rotate the mast even when fixed with guys and pegs.

Order No.
18310.20 20 mm inner diameter 9.00 € Buy now
18310.40 40 mm inner diameter 9.00 € Buy now
18310.50 50 mm inner diameter 9.00 € Buy now
18310.60 60 mm inner diameter 9.00 € Buy now
Info freight charges

Tripod Mount

Used to erect the tripod on sandy soil and to equalize the tripod up to max. 100 mm inclination. The mount size is 240 x 120 mm, the plates are made of aluminum and come in packages of 3 pieces per set.

Fix the Tripod Mount with our Screw Tent Pegs stably in the earth.

Order No.
18312 Tripod Mount 42.60 € Buy now
Info freight charges

Universal, small collapsible mast base STU-70

The STU-70 is uses a square aluminium with a size of 90 x 90mm. It comes with four support struts, which rest horizontally on the ground when mounted, and which can be mounted in different ways.

Using 2 struts results in a tilting mast base, on which a car can be parked. Mounting all 4 struts starlike results in a free-standing mast base; the struts can be fixed to the floor with weights like concrete slabs, or with the help of the included mounting brackets and with screw pegs.

At last the support struts can be mounted vertically and then set in concrete or put in the ground; the latter however is only possible in light sandy soil. Guying is necessary in any case, of course.

The mast base is suitable for holding portable masts or other tubes made of aluminium or steel as well as for clamping glass-fiber reinforced masts with diameters of 40-70mm. The included clamping piece helps that glass-fibre masts are not stressed with a point load, which could easily crush the masts. Instead the load is distributed over a larger surface

Dimensions of the mast base when collapsed are 550x90x90 mm and fits in every car trunk. The support struts and all necessary hardware parts can be placed inside of the mast base, the ends are closed by two easily removable aluminium plates. Total weight is 4.7 Kgs.

Order No.
18390 STU-70, universelles Maststativ 125.00 € Buy now New
Info freight charges

Accessories STU-70

Find more information about our screw pegs on the guying material page.

Order No.
23205 Screw peg 300mm, aluminium 12.80 € Buy now
23210 Screw peg 300mm, hardend aluminium 16.90 € Buy now
Info freight charges

Mast tripod M55

Compact, heavy steel tripod for masts from 40 to 55 mm diameter. Collapsible in one move, well suited for portable applications - i.e. just drive the car onto one of the tripod legs (park-on mount)... Made of galvanized steel.
New model with modified clamping device: features now more clamping space and a slot, in addition one leg can be height adjusted.
Collapsed dimensions 55x18x18 cm, weight 15 Kg.

Order No.
18325 115.00 € Buy now
Info freight charges

Mast base

Steel base for masts from 48 to 60 mm diameter. With 4 top-hat rails that can be unscrewed, for insertion of sidewalk flagstones sized 40x40cm, galvanized. Collapsed size 42x17x16, weight 5kg.

Order No.
18326 Mast Base 59.00 € Buy now
Info freight charges

Mast Base PH-55

Maststativ

Mast base for 4 paving stones 40 × 40cm or 50 × 50cm, for tubes with diameters from 48 to 55 mm Ø. Weight c. 6.8kg, galvanized.

Order No.
18327 Mast base PH-55 39.00 € Buy now
Info freight charges

Diamond AM-450/AM-600 Portable Mast

Lightweight aluminium telescopic masts by Diamond with a smart mount head. Extended height 450 or 600cm.

The mast has a versatile head mount which allows mounting of various vertical or directional antennas. Further you can install Diamond cable sets or other N or PL sockets, so you can install mobile antennas. And when you remove the mounting bracket you have a 1/4" thread used to mount a camera!

Model AM-450 AM-600
Length retracted 145cm 160cm
Length extended 450cm 600cm
Number of Sections 4 5
Tube Diameters 22 — 31mm 22 — 34mm
Weight 1.2 kg 1.6kg
Length of guy rope 30 m 30 m
Max. load (weight) ca. 8kg ca. 8kg
Order No.
18303.45 Diamond AM-450 Mast 159.00 € Buy now New
18303.60 Diamond AM-600 Mast 199.00 € Buy now New
Info freight charges

Buddipole mast with tripod

The well known shortwave portable antenna 'Buddipole' has an interesting mast which is suitable for small antennas. Two masts with 290 or 550 cm are available, collapsible to 66 or 99 cm respectively. The tripod has a collapsed length of 66cm. Due to the light weight this is a very easy to transport mast solution. The mast has a 1/2′ NPT thread on top (cone shaped).

Required is the tripod article number 11420.BPT and one short (11420.BM) or one long mast (11420.BML). Or both?

Buddipole Mast und Stativ sind sehr kompekt transportierbar
Size and Weight for Buddipole Masts and Tripod
11420.BM (short Mast) 0.65 kg
11420.BML (long Mast) 1.50 kg
11420.BPT (Tripod) 1.85 kg
Diameter Tube 1 (lowermost) 38.0 mm (1 1/2″)
Diameter Tube 2 34.8 mm (1 3/8″)
Diameter Tube 3 31.6 mm (1 1/4″)
Diameter Tube 4 28.5 mm (1 1/8″)
Diameter Tube 5 25.4 mm ( 1″)
Diameter Tube 6 21.9 mm ( 0 7/8″)
Diameter Tube 7 (topmost) 18.8 mm ( 0 3/4″)
Order No.
11420.BM 290cm Mast for tripod (shipping size 66cm) 86.30 € Buy now
11420.BML 550cm Mast for tripod (shipping size 99cm) 143.80 € Buy now
11420.BPT Tripod (shipping size approx. 66cm) 119.00 € Buy now
Info freight charges