Mast in fibra di vetro, tubi singoli etc.

HD-Fibreglass mast

HD-Fiberglasmast 10m

10m 'Heavy Duty' fibre glass mast, reinforced version. Sizes comparable to the standard 10m mast, but much more solid.

The diameter of the topmost tube is approx. 11mm, the lower most tube has a diameter of 45.8 mm at the lower end. The wall thickness is approx. 1 mm at the top and approx. 2 mm at the lower tubes. This makes this fibre glas mast nearly rigid, the mas tcan carry lightweight small yagi antennas, LogPer antennas or light wires. But also cameras, small anemometers or small lights can be mouted at the top. The HD fibre glas mast consists of ten segments, the extended length is slightly more than 10m, transport length is 117cm. Weight 1.7kg.

The lower most tube is closed with a rubber plug which aligns with the diameter of the lower tube. I.e. the plug does not contribute to the diameter. This plug is glued into the lower most tube and can not be removed. The result is that segments which are not required can not be removed. Just leave not required segments inside the lower most tube.

Diameters of all tubes at the topmost end (all values approximative): 11, 14.5, 17.1, 20.7, 24.3, 27.5, 31.1, 34.6, 38.6, 43.2 mm.

Mast Extension für HD Mast New!

The HD FIbre glas mast 18333.10 can be extended with up to 5 extension tubes, making the mast longer by approx. 4.5m. One extension (ref. 18334) consists of a 112cm long, conical tube made from very solid fibre glass material. An additional adaptor ztube (ref. 18334.01) connects the HD mast and the first extension tube. Each further extension does not require the adaptor, it fits into the previous extension.

The first extension tube extends the 10 m HD mast by about 66cm, due to the long overlap. Each further extension adds another 97cm. With maximal five extensions the 10m HD mast can be extended by 4.5m in total. The extension tube as ha diameter of 50 mm at the top, and about 56 mm at the bottom. Weight of theextension 560g, weight of the adaptor tube 310g.

The extension tubes can be used alone for a solid mast with nearly constant diameter. The number of tubes is only limited by the top load and by the guying of the mast. One of the 40cm long adaptor tubes could be used at the very top to protect the end of the mast and provide better fastening for $ntennas etc.

Ordine No.
18333.10 10m HD Fibre glass mast 79.50 € Ordina
18334 110cm Tube extension 25.00 € Ordina
18334.01 Adaptor for 18334 to 18333.10 (required once per 18333.10) 20.00 € Ordina
Info sui costi di spedizione


Video about HD-Mast 18333.10

The same video in HD resolution (1920x1080).

Mast in fiber glass a Standard


I nostri semplici mast in fibre glass hanno la stessa rigidità degli originali, ma non ci sono zone di frizione e rinforzi ai terminali di ogni tubo, nessuna sacca di protezione come gli originali. Lunghezza retratta 1m, estesa 4, 6 o 10m.

Nuovo 18333.6K – short, but strong mast, extended length 6m. Very robust: diameter at top 4mm. Will carry lightweight antennas such as HB9CVs or our SOTA-Antenna (Order No. 18503).

4m 6m 6m 8m 10m 12m
Ordine No. 18338.04 18338.06 18333.6K 18338.08 18338.10 18338.12
Lunghezza (alungare) 4 6 6 8 10 12 m
Lunghezza (trasporto) 1,17 1,17 0,65 1,16 1,17 1,15 m
Diametro sopra 3 3 4 3 3 3 mm
Diametro abbasso 28 28 40 28 46 58 mm
Peso 230 460 680 800 1440 1630 g
Ordine No.
18338.04 4m lunghezza 11.80 € Ordina
18338.06 6m lunghezza 21.00 € Ordina
18333.6K 6m lunghezza, corto, HD 39.00 € Ordina
18338.08 8m lunghezza 33.00 € Ordina
18338.10 10m lunghezza 45.00 € Ordina
18338.12 12m lunghezza Available again in late October 75.00 € Ordina
18339 Cloth Bag for fiberglass poles, blue 5.00 € Ordina
Info sui costi di spedizione
Mast 18333.6K 18333.6K

Carrying Bag for masts and accessories

Carrying bag 18335 Carrying Bag

Versatile carrying bag for portable masts, antennas and accessories.

The carrying bag 18335 is very well suited to transport and store multiple portable masts, collapsed antennas for VHF or shortwave, cables and other accessories. The bag has three separately accessible compartments which stretch over the entire length of 116cm. The inner size of each compartment is 6 x 19 x 116 cm, suitable for multiple glass fibre masts, VHF yagi elements, dipoles, coaxial cables or collapsed boom tubes.

On the outside three smaller bags with sizes of 13x70, 13x59 and 13x24 cm are applied, each has a depth of 4cm. This is helpful for separate packing of smaller accessory parts like brackets, screws, adaptors etc.

The carrying bag has carrying handles on one side, on the other side long, adjustable belts. With these belts the bag can be carried like a back pack, for example on mountain tours where you need your hands free. The materials (synthetic leather and snthetic fabric) and quality of the bag is good and robust, the handles of the zipper fasteners are long enough tio be used even with gloves. Total weight (empty) 1100g. Colour black with silver/white applications on the outer bags.

Ordine No.
18335 Carrying Bag 25.00 € Ordina Nuovo
Info sui costi di spedizione


Spiderbeam 18m Fiberglass mnast


Especially developed for portable use on the low bands 80 and 160m. Ideal for constructing various wire antennas, for example 80/160m wire verticals, inverted Vee or inverted L antennas. Many DX-peditions use these masts to build a 4 square antenna for 80 or 40m. A portable 80m 4-square can be set up in about one hour. Equally suited for light 1 elem. quads or Delta Loops for 40 to 10m.

A single person can set up one mast in a few minutes.

Low weight, very solid lower sections (73 mm diameter, 2 mm wall thickness), in 10m height still 50 mm diameter at 1.5 mm wall thickness. Light segments on top (1 mm wall thickness) for good balance. The reinforced laminating technique - many layers of fibre glass in different directions - results in significantly stronger segments. All masts are supplied with a free stainless steel clamp set.

Full height 18m
Transport size 1.7m
Peso 6.8kg
Diameter bottom/top 73/4mm
Wall thickness bottom/top 2/1mm
Number of segments 12
Material Fibre glass
Colour Black, UV resistant
Ordine No.
18360 18m Mast 219.00 € Ordina
Info sui costi di spedizione

Accessori pali telescopici: nastro in PVC

Nastro adesivo per bloccare il palo di fibra di vetro ed i cavi. Larghezza 12mm, 66m per bobina, confezione da tre. Utilizzabile per ogni altra applicazione.

Ordine No.
18375 Nastro in PVC, 6 bobina à 66m 6.90 € Ordina
Info sui costi di spedizione


Spiderbeam 26m Fibre glass tower


26m Mast

Gigantic fibre glass tower with 26m height!
Solid construction with low weight and only 2m transport length. The fibre glass tubes are black and UV resistant, wound with multiple layers and reinforment rings. The wall thickness is 2.mm on the lower end, and 1 mm on the upper end.

Such a open a whole new world of possibilities. How about a 160m vertical with top load? Or a fullsize vertical for 80m, or even a portable 4-Square for 80m? Or build a 1 element Quad loop for 40m!

The installation can be done by two persons in about one hour, with a little practice also faster. Included in the shipment are 14 rubber-padded clamps and three guying rings. Additionally you will need gyuing lines, e.g. our light 3 mm Dyneema rope (Ref. 23100), plus material to fix the rope to the ground (ground pegs etc.).


Dati tecnici
Height 26m
Transport length 2m
Peso 18kg
Diameter lower end 108mm
Diameter upper end 4mm
Wall thickness lower end 2.5mm
Wall thickness upper end 1mm
Number of segments 15
Number of guying levels 3 (above 4., 7. and 11. segment)
Material Fibre glass, black, UV resistant, multilayer with reinforcements
Ordine No.
18361 26m Mast 549.00 € Ordina
Info sui costi di spedizione


Mast telescopici in robusta fibra di vetro


Paragonato alle leggere 'canne da pesca ' questo mast e' adatto per l'installazione di antenne per HF o direttive V/UHF fino a 12 Kg di peso opesanti antenne filari (es. V invertito , delta loops etc.). Il mast puo' essere usato per applicazioni fisse o per usi portatilidurante le spedizioni DX o nel tuo QTH del weekend.

I masts sono fatti di fibra di vetro resistente agli ultraviolettidi 1.5m di lunghezza e 60 mm di diametro; essi sono molto piu' rigidi se paragonati agli analoghi in alluminio. I masts sono disponibili in varie lunghezze fino a 12m completi degli opportuni accessori .



Il modello base MV-75 ha una lunghezza di 7.5m e puo' essere installato da una singola persona in 10 minuti.Il mast puo' ruotare anche se ha i tiranti e il suo peso e' di 12 Kg incl. il kit meccanico K-75; sopporta la massima velocita' del vento di 130km/h.

The armature kit K-75 contains the base plate kit with 4 ground pegs for fixation, a guy rope (must be cut to length by the user) with guying fixation and 4 ground pegs, and the top assembly with mounting material. The vertical tube of the top kit has a diameter of 40cm and a useable length of 19cm. The horizontal tube on the top assembly has a diamter of 16 mm and a length of 8cm on each side. The ends of the horizontal tube have holes for installation of a pulley of shackle.

Per mezzo di tre sezioni aggiuntive il mast puo' essere esteso fino a 12m.In questo caso e' disponipile un opportuno sistemi di tiranti.

  • Included in shipment 18340 MV-75
  • 5 pcs glass fibre tubes 60mm
  • 4 pcs aluminium connectors plus installation hardware
  • Included in shipment 18342 K-75
  • Top assembly with aluminium connector and hose clamp
  • Base plate assembly, 2 brackets, 4 ground pegs
  • Guy rope, 4 ground pegs, 1 guy fixation and installation hardware
  • Included in shipment 18343 K-12
  • 3 pcs glass fibre tubes 60mm
  • 3 pcs aluminium connectors plus installation hardware
  • Guy rope, 1 guy fixation and installation hardware


Ordine No.
18340 MV-75 Mast Lunghezza 7,5m, 5 segments à 1,5m, peso 7 Kg. 199.00 € Ordina
18341 M-15 fiber glass plug mast part 1,5m 42.50 € Ordina
18342 K-75 adattatore meccanico per MV-75 115.00 € Ordina
18343 K12 12m kit di estensione 185.00 € Ordina
Info sui costi di spedizione
Download: MV-75 K-75 Istruzioni di montaggio (PDF, EN, 440KB)
18342 Fitting Kit K-75

Tubi in fibra di vetro


Bild GFK Rohr

Diametro 40 mm Ø , spessore 4mm, peso 0,8 Kg/m or
diametro 51 mm Ø , spessore 8mm, peso 1,9 Kg/m

Ordine No.
23090.01 40x4 length 1m 15.20 € Ordina
23090.02 40x4 length 2m 30.70 € Ordina
23090.25 40x4 length 2,5m (Shipping by UPS possible) 40.00 € Ordina
23090.03 40x4 length 3m (Shipping only by freight forwarding) 45.70 € Ordina
23090.06 40x4 length 6m (Shipping only by freight forwarding) 91.80 € Ordina
23094.01 50x8 length 1m 32.80 € Ordina
23094.15 50x8 length 1.5m 54.40 € Ordina
23094.02 50x8 length 2m 65.70 € Ordina
23094.03 50x8 length 3m 98.50 € Ordina
23094.06 50x8 length 6m 197.00 € Ordina
Info sui costi di spedizione

Tubi Alluminio

Tubi di alluminio per la progettazione dell'antenna. Fino a 6 metri di lunghezza disponibili, altre lunghezze su richiesta. Si prega di notare che le spese di spedizione molto più elevati per gli articoli con più di 2 m di lunghezza!

Ordine No.
23080.02 Tubo Alluminio 40x2 Lunghezza 2m 21.50 € Ordina
23080.03 Tubo Alluminio 40x2 Lunghezza 3m 31.80 € Ordina
23081.03 Tubo Alluminio 40x5 Lunghezza 3m 48.70 € Ordina
23081.06 Tubo Alluminio 40x5 Lunghezza 6m 97.30 € Ordina
23082.02 Tubo Alluminio 50x2 Lunghezza 2m 21.50 € Ordina
23082.03 Tubo Alluminio 50x2 Lunghezza 3m 32.60 € Ordina
23083.03 Tubo Alluminio 50x5 Lunghezza 3m 60.50 € Ordina
23083.06 Tubo Alluminio 50x5 Lunghezza 6m 121.00 € Ordina
Info sui costi di spedizione

Tubi d'acciaio


Spessore notevole , fatti di acciaio ST52 , 32x2,9mm, senza giunzioni, adatto per tutte le antenne GAP o qualunque altro uso. Venduta al metro fino a una lunghezza di 2.5m da spedire con UPS insieme all'antenna.

Ordine No.
23110 tubi d'acciao per metro 21.50 € Ordina
23110.2 2m 43.00 € Ordina
23110.25 2.5m 53.50 € Ordina
Info sui costi di spedizione

Tappi per tubi, varie dimensioni


Tappi per masts o tubi, materiale PVC.La dimensione e' relativa al diametro esterno del tubo, adatta per tubi con spessori fino a 2.5mm.

Ordine No.
23089.20 20 mm 2.60 € Ordina
23089.25 25 mm 2.60 € Ordina
23089.30 30 mm 2.90 € Ordina
23089.35 35 mm 2.90 € Ordina
23089.40 40 mm 3.30 € Ordina
23089.45 45 mm 3.30 € Ordina
23089.50 50 mm 3.60 € Ordina
23089.55 55 mm 3.60 € Ordina
23089.60 60 mm 3.60 € Ordina
23089.70 70 mm 4.60 € Ordina
Info sui costi di spedizione

Pezzo di ricambio per mast in fibre glass 'Spieth'

Ordine No.
18330.X02 Replacement cap bottom 3.00 € Ordina
Info sui costi di spedizione