More than just a soundcard interface - Digi Keyer
The Digi Keyer is much more than an interface, because it is an own, self contained soundcard. Together with the other integrated components like CAT interface and PTT/FSK/CW keyer this is a very versatile interface for all special modes. Use RTTY, Fax, SSTV, Echolink, PSK31, MFSK, Olivia, WSJT, APRS and many more, everything which is supported by a soundcard.
With the integration of a high-quality soundcard you have several advantages:
Of course all connections between radio and PC are electrically isolated to avoid noise loops. Between the Digi Keyer interface and the PC just a standard USB cable is required. And also from interface to the radio it's only one cable, which usally connects to the rear connections of the radio. This greatly simplifies station setup.
The integrated CAT interface transmits frequency nad other information between PC and radio, most manufacturers are supported: Icom, Kenwood, Yaesu, Elecraft, JRC, and TenTec. Depending on type a level conversion is done by the interface.
With just one cable between Digi Keyer and radio all connections for CW, PTT and FSK keying are done. Further the interface offers two more time delayed PTT lines for power amplifier and pre-amp keying.
A remote connection on the rear side of the Digi Keyer is used for a PS/2 keyboard (full or 10 Keypad, see below). With this keyboard pre-defined text can be recalled for digital modes like RTTY.
The cable between Digi keyer and radio is individual to each radio model and must be ordered separately. We offer cables for most radio models. If the interface will be used on several radios, just order one cable for each radio.
Weight 0.55kg, Size 175x85x44mm.
Note: A computer with at least 800MHz processor clock is recommended for use with the Digi-Keyer.