RigRunner power distribution strips

Low-cost power distribution with PowerPole connectors New

8 connectors: 1 input, 7 outputs, each connector individually fused. Metal housing.

  • Included in delivery:
  • Set of 8 connectors (8red/8black)
  • Spare fuses with removal tool
  • Adhesive Velcro for mounting
Technical Data
Operating Voltage 36V max.
Fuse protection Input 40A
Output 3x 25A, 2x15A, 1x10A, 1x5A
Dimensions 188 x 50 x 30mm
Weight 175g
Order No.
PP-8SPLIT Low-cost Stromverteiler 99.00 € Buy now New In stock, shipped in 1 or two days.
Info freight charges

RigRunner power distribution with PowerPole connectors


RigRunner series 4005, 4008 and 4012

Intelligent DC power distribution ("multiple socket outlet for 12V"). Finally, no more Gordian knots, twisted cables, short circuiting, loose contacts and duct tape muddle! The easy installation makes it a perfect solution for home, portable operations, field day and contest. The power strips have a capacity of 40 Ampère. Each outlet is fused individually with robust and readily available automotive ATC/ATO fuses. A LED indicates failure of a fuse (easily accessible on front plate).

Power strips with 5 to 12 connectors for consumers are available. Almost all strips have a visual and audio alert for over and under voltage, there are models with switching capabilities ("S" in name/order no.) as well as a model with Ethernet connection and integrated web server for remote-control via internet. Model versions "C" and "H" differ in the arragement of connectors. The fuses and connectors on the "C" version are on the same side, when mounted to a wall the cables are plugged in perpendicular to the wall. With the "H" version the connectors are on the bottom side, the fuses on the front, when mounted to a wall the cables are plugged in parallel to the wall. Models with a "U" in its name have a USB port, which is very convienent for charging your mobile phone or suppling small 5V consumer.

Possible interfering HF is blocked by the metal housing and internal HF blocking and kept away from the individual devices and power supply. The power strips 4012 and 4008 indicate with via warning light and (disengageable) audio alert possibly occuring over and under voltage. The inputs of all power stripes are connected, too, so that multiple strips can be easily cascaded as needed.

  • Advantages of RIGrunner over traditional power distribution strips
  • more compact - more connectors in less space
  • total capacity 40A
  • reverse polarity protection - mixing up plus and minus not possible
  • each connector individually fused
  • Blown fuses are indicated by a LED
  • all outputs already installed with various fuses
  • ATC/ATO auto fuses - inexpensive and available worldwide
  • visual alert for undervoltage (except model 4005)
  • visual and audio alert for overvoltage (except model 4005)
  • each connector protected and choked to void HF interference
  • and many more...


Comparision Table RigRunner Power Distributions Strips
Model 4005C 4005H 4005LAN 4007U 4008C 4008H 4010S+ 4012C
No. of connections 5 5 5 7 8 8 10 12
Max. Load 40A 40A 40A 40A 40A 40A 40A 40A
Under/Overvoltage alarm - - - Yes Yes - Yes Yes
Switching function - - Yes Yes - - Yes -
Current/Voltage Display - - Yes, web page Yes, 7 segment - - - -
USB charging socket - - - 1 - - - -
Supplied cable 180cm with PowerPole connectors Yes Yes Yes No Yes Yes Yes Yes
No. of supplied connectors 5 pairs (5 red/5 black) 5 pairs (5 red/5 black) - - 8 pairs (8 red/8 black) 8 pairs (8 red/8 black) 10 pairs (10 red/10 black) 12 pairs (12 red/12 black)
Dimensions 35 x 152 x 76 mm 35 x 178 x 76 mm 38 x 203 x 127 mm 22 x 246 x 81 mm 35 x 228 x 76 mm 35 x 247 x 76 mm 35 x 298 x 71 mm 35 x 298 x 76 mm
Weight 192 g 192 g 840 g 365 g 219 g 319 g 433 g 433 g
Order No. RR-4005C RR-4005H RR-4005LAN RR-4007U RR-4008C RR-4008H RR-4010S+ RR-4012C
Order No.
RR-4005C RigRunner 4005C 104.00 € Buy now Not in stock, back on: 31. Mar. 2017
RR-4005H RigRunner 4005H, horizontal 104.00 € Buy now In stock, shipped in 1 or two days.
RR-4005LAN RigRunner 4005LAN, Ethernet 339.00 € Buy now In stock, shipped in 1 or two days.
RR-4007U RigRunner 4007U 235.00 € Buy now Not in stock, back on: 31. Mar. 2017
RR-4008C RigRunner 4008C 144.00 € Buy now In stock, shipped in 1 or two days.
RR-4008H RigRunner 4008H, horizontal 132.00 € Buy now In stock, shipped in 1 or two days.
RR-4010SPLUS RigRunner 4010S+ 239.00 € Buy now In stock, shipped in 1 or two days.
RR-4012C RigRunner 4012C 161.00 € Buy now In stock, shipped in 1 or two days.
Info freight charges

RigRunner 4005C / 4005H - Power Distribution Strip

RR-4005C/H

The RR-4005C provides 5 connectors for various consumers. Each connector is individually fused with automotive ATC/ATO fuses, a blown fuse is indicated by a LED. The RR-4005H is the same distribution as the RR-4005C, but for wall mounting. The power pole connectors are arranged in this device on the underside. So bent and pulled out cables have finally ended.

  • Included in delivery:
  • RR-4005C or RR-4005H distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (5red/5black)
Order No.
RR-4005C RigRunner 4005C power distribution strip 104.00 € Buy now Not in stock, back on: 31. Mar. 2017
RR-4005H RigRunner 4005H power distribution strip, horizontal 104.00 € Buy now In stock, shipped in 1 or two days.
Info freight charges

RigRunner 4005LAN: Intelligent "Distribution Strip" with Ethernet!

RR-4005LAN

The RR-4005LAN is a power distribution strip with Internet connectivity! The special feature of this device is an Ethernet connection, which allows to integrate the RR-4005LAN easily into your local or remote network.

Every operator of a remote site knows this problem - which devie is requiring how much power? How can I easily switch of a transmitter without driving a long distance up on the mountain? Not only for repeater operators the RR-4005LAN is an excellent extension of the equipment, but also for everyone who runs a remote controlled station, a weather monitoring post, remote data acquisition system and much more.

The RR-4005LAN offers five individually switchable DC connections for devices. The distributor uses the well known PowerPole Connectors which are becoming more and more widely used, not only in amateur radio but also in RC models, data acquisition etc.

Each DC outlet can be fused individually. An electronic fuse can be set between 0.1 and max. 40A. The total current for all consumers must not exceed 40A.

The integrated web server allows turning on and off of each individual device, the display of actual current, the display of input voltage etc. To facilitate in automation of some tasks this data is also available in XML format.

At the location the RR-4005LAN shows the current consumption on a LC display. This display shows the actual input voltage and current of one consumer at a time. All settings are done either at the device itself or via the integrated web server. Integration into the local network is very easy, the IP adress is either configured manually or via DHCP.

Also directly at the device each consumer can be switched on and off individually. It is important to note that the individual state (on/off) is retained even after a power failure. When power comes back only the enabled outlets are turned on.

An extension socket on the RR-4005LAN is for future extensions, like cascading several distribution strips, acquisition of analog data or serial data communications.

  • Included in shipment is:
  • RR-4005i DC distributor with Ethernet
  • 1m Ethernet Cable
  • Documentation (English)
Order No.
RR-4005LAN RigRunner 4005LAN DC Distributor with Ethernet 339.00 € Buy now In stock, shipped in 1 or two days.
Info freight charges

RigRunner 4007U Power Distribution with Switching Capability, USB

RR-4007U RigRunner 4007U

The distribution strip RR-4007U differs from other models by these noteable features:

  • a central on/off switch to power all connected,
  • a display of voltage or current with a 7 segment display and
  • a USB socket for charging Apple or Android phones or other USB powered devices.

As other RigRunner power distribution strips the RR-4007U has an automatic over and under voltage protection, individually fused line for each load with error LED, HF chokes on all lines to prevent interferences and much more.

The central switching capability is very useful when you want to turn off all loads, but keep the main power supply running. For example when you want to continue to charge a battery. The display of voltage or current comes in helpful, when you need to check the power supply without using further means of measurement. The displayed current is the the total current of all loads. The built-in USB socket is very advantageous with the ubiquitous USB device like phones or batteries. It is designed to the USB specs and limits the charging current depending on device types like Apple or Android.

  • Included in shipment is:
  • RigRunner power distribution strip
  • Rubber feet, self adhesive
  • Engl. owners manual
Order No.
RR-4007U RigRunner 4007U Power Distribution Strip with Switch, USB 235.00 € Buy now Not in stock, back on: 31. Mar. 2017
Info freight charges

RigRunner 4008C / 4008H - Power Distribution Strip

RR-4008C/H

The RR-4005C provides 8 connectors for various consumers. Each connector is individually fused with automotive ATC/ATO fuses, a blown fuse is indicated by a LED. The RR-4008H is the same distribution as the RR-4008C, but for wall mounting. The power pole connectors are arranged in this device on the bottom side, which is much more convenient for this installation type. In contrast to the "C" variant the 4008H does not provide a under/over voltage warning.

  • Included in delivery:
  • RR-4008C or RR-4008H distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (5red/5black)
Order No.
RR-4008C RigRunner 4008C power distribution strip 144.00 € Buy now In stock, shipped in 1 or two days.
RR-4008H RigRunner 4008H power distribution strip, horizontal 132.00 € Buy now In stock, shipped in 1 or two days.
Info freight charges

RigRunner 4010SPLUS Power Distribution Strip with Switching Capability

FRigRunner RR-4010S-Plus RR-4010S-Plus

The power distribution RR-4010SPLUS is the successor to the RR-4020SC and provides connectors for 10 consumers. In case of over or under voltage a visual and audio alert is triggered. The special feature of the RR-4010SPLUS strip is its switching capability. Once a load is applied to consumer 1, the other consumers 2 to 10 are automatically switched on. For example, by switching on a main consumer such as a radio all other accessories of the station are also switched on. For switching a PowerFET with 90A load capacity with temperature and overcurrent protection. This automatic function can be turned off so that the dependent consumers are always on or always off.

In addition, the power distributor RR-4010SPLUS has many parameters to adjust. Via USB and with the help of a simple terminal program you can adjust the threshold values for over/under voltage alarm, or operation limit for the switching function on the main consumer. Another parameter controls the switch-off delay, adjust the time after which the dependent consumers, when switching off the main consumer, are also switched off. The consumers can be switched off and on via USB command, too. An internal jumper helps to turn off all LEDs for minimum power consumption. These are all useful functions for remote-controlled relay stations with emergency power supply or control functions on board a vehicle.

  • Included in delivery:
  • RR-4010SPLUS distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (10red/10black)
  • Engl. owner manual

A micro USB cable, necessary for programming special functions, is not included in delivery!

Order No.
RR-4010SPLUS RigRunner 4010SPLUS distribution strip 239.00 € Buy now In stock, shipped in 1 or two days.
40074.06 USB cable A/micro-B, 60cm 3.90 € Buy now In stock, shipped in 1 or two days.
40074.1 USB cable A/micro-B, 100cm 4.50 € Buy now In stock, shipped in 1 or two days.
Info freight charges

RigRunner 4012C Distribution Strip

RR-4012C

The RR-4012C provides 12 connectors for various consumers. Each connector is individually fused with automotive ATC/ATO fuses, a blown fuse is indicated by a LED. Like other RigRunner distribution strips the RR-4012C automatically switches off in case of over or under voltage with a visual and audio alert. HF chokes on all lines to prevent interferences.

  • Included in delivery:
  • RR-4012C distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (12red/12black)
Order No.
RR-4012C RigRunner 4012C distribution strip 161.00 € Buy now In stock, shipped in 1 or two days.
Info freight charges