Material for securing antenna masts (Guy ropes etc.)

Screw Tent Pegs

Various options to install the peg Various options to mount the peg

Screw Tent pegs offer a better alternative to fasten guy wires of masts, tents, pavillions and much more! These screw pegs offer a much stronger fixation to ground than traditional pegs and can be installed easily with cordless screwdrivers or even manually.

The 8 mm sideways hole in the head of the screw peg is suited for installation of a shackle (see 23010.08) or a rope. You can also use a solid screw driver as a lever to drive the screw into ground manually.


Screw Tent Peg 320 mm with crosswise hole

The screw peg is made from UV resistant, glass fibre reinforced polyamide, it is especially suitable for sandy and soft grounds, even under stormy conditions. Drive the screw peg into ground with a size 24 spanner socket, a size 24 flat wrench or with a large screwdriver (used as lever through the 8 mm hole). Used for guying a small tent or portable mast. A shackle is useful for easy fixation of guy ropes, see 23010.08.


Articulo No.
23200 Screw Tent Peg Polyamide 6.80 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Screw Tent Peg 300mm, Aluminium, with crosswise hole

The screw tent peg can be driven on it's full length into ground by means of a strong tool, the hardened version is even capable of displacing small stones. Drive the screw peg into ground with a size 24 spanner socket, a size 24 flat wrench or with a large screwdriver (used as lever through the 8 mm hole). Used for tents or portable masts. A shackle is useful for easy fixation of guy ropes, see 23010.08.


Articulo No.
23205 Screw Tent Peg 300mm, Aluminium 12.80 € Comprar Disponible, envio en 1 o 2 diás.
23210 Screw Tent Peg 300mm, hardened Aluminium 16.90 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Accessories for Screw Tent Pegs

Hook Plate for Screw Pegs

This versatile hook plate is intended for use with the screw tent pegs order no. 23200, 23205 and 23210 and offers a perfect fixation point on the peg, regardless on how deep the peg is driven into ground. The hook plate can be fastened in any height and offers various options to attach ropes, tubes, tent feet and much more! Suitable for grommets of up to 8 mm diameter. Included in shipment are two pieces.

Articulo No.
23220 Hook Plate for Screw Tent Pegs (2 pieces) 9.50 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Shackle, 8mm, stainless steel

Schäkel 8mm, Edelstahl 8 mm shackle, inox

This stainless steel shackle is used to connect grommets, rings, s-hooks, carabiner hook, belts and other material. This shackle is very well suited for the tent pegs with the 8 mm crosswise hole. THis shackle does not fit under the heads of the pegs, it is too large for that purpose.


Articulo No.
23010.08 8 mm Shackle, stainless steel 4.80 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Becket (grommet) for Tent Pegs

Seilöse für Schraubhaeringe Becket for tent pegs

Becket to be used with tent pegs, for fastening of ropes. One pack includes set of four (4) pieces.


Articulo No.
23230 Rope Becket for tent pegs (4 pcs.) 6.40 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Sapnner socket 24 mm with adaptor

Nuss 24 mm mit Bit-Adapter 24 mm spanner socket

24 mm spanner socket with long hex adaptor, used to screw tent pegs into ground with the help of a power drill.


Articulo No.
23240 Spanner socket 24 mm with hex adaptor 9.95 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Guy ROpes, Guy Wires

Dyneema guy rope


Dyneema rope, only 3 mm thick and very unobtrusive. High breaking load of 400 Kg! Pre-stretched, only minimal strechting when wet.
Articulo No.
23100 Dyneema, per meter 1.50 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

PES guy rope



Braided PES guy rope, 5 mm with 420kg breaking load. Low strecht, weather proof, UV resistant.
Articulo No.
23102 per meter 0.50 € Comprar Disponible, envio en 1 o 2 diás.
23102.100 100m coil 46.20 € Comprar Disponible, envio en 1 o 2 diás.
23102.200 200m coil 86.20 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Nylon Monofil guy wire



Nylon Monofil is a new type of guy wire for antennas and masts. Monofil is not braided buit one solid wire of nylon, extremely solid, extremely low stretch, breaking load of the 5 mm wire is 700kg! But still lightweight and weatherproof and due to the white color quite unobtrusive. For even higher breaking loads use several wires in parallel. Can be fitted with the usual mounting hardware.
The 2 mm version can be used to brace antennas etc.

Technical Data 5 mm Monofil (23101.x):
  • Material: 6 SNIA Nylon
  • Specific weight: 1.14 g/cm³
  • Specific breaking load: 35-40 kg/mm²
  • Breaking stretch: 15-20%
  • Diameter: 2 mm or 5 mm
  • Breaking load: 120 kg (2mmØ), 700 kg (5mmØ)
Articulo No.
23101.5 5mm, per meter 0.90 € Comprar Disponible, envio en 1 o 2 diás.
23101.5-50 5mm, 50m coil 43.50 € Comprar Disponible, envio en 1 o 2 diás.
23101.5-100 5mm, 100m coil 83.50 € Comprar Disponible, envio en 1 o 2 diás.
23101.2-25 2mm, 25m coil 15.00 € Comprar Disponible, envio en 1 o 2 diás.
23101.2-50 2mm, 50m coil 30.00 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Light guy rope


Light rope with 3 mm diameter, suitable for guying lines of masts and verticals. Nearly invisible, UV resistant black polyester, 16 times braided, low stretch, breaking load 150kg, available as 30 or 60m coil.
Articulo No.
23105.30 30m coil Polyester rope, black 15.00 € Comprar Disponible, envio en 1 o 2 diás.
23105.60 60m coil Polyester rope, black 30.00 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Guy wire kit


For guying of masts or antennas. Kit consists of one guying clamp (30-50 mm diameter) and 30 or 60m black 3 mm DACRON rope (polyester) with a breaking load of 120kg.
Articulo No.
11340 30m kit 35.70 € Comprar Disponible, envio en 1 o 2 diás.
11341 60m kit 53.70 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Clamps, Locks, Brackets

Guy wire thimble


Articulo No.
23020.03 3mm, galvanised 0.50 € Comprar Disponible, envio en 1 o 2 diás.
23020.04 4mm, galvanised 0.50 € Comprar Disponible, envio en 1 o 2 diás.
23020.06 6mm, galvanised 0.80 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Guy wire clamps


For security reasons we recoomend the use of two clamps one each end.

Articulo No.
23025.03 3mm, galvanised 0.50 € Comprar Disponible, envio en 1 o 2 diás.
23025.06 6mm, galvanised 0.50 € Comprar Disponible, envio en 1 o 2 diás.
23025.08 8mm, galvanised 0.80 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Wire clamps


Wire clamp 3mm, stainless steel
Articulo No.
23060 Simplex 1.10 € Comprar Disponible, envio en 1 o 2 diás.
23060.D Duplex 1.99 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Guy wire clamp



for Nylon rope, rope diameter 3.5-8 mm
Articulo No.
23061 1.20 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Guy wire tightener


Articulo No.
23011 6mm, galvanised 2.90 € Comprar Disponible, envio en 1 o 2 diás.
23012 8mm, galvanised 3.60 € Comprar Disponible, envio en 1 o 2 diás.
23013 10mm, galvanised 5.60 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

S hook for rope tightener


Articulo No.
23015 1.00 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Guying clamp


Articulo No.
23005 25-50 mm 3.60 € Comprar Disponible, envio en 1 o 2 diás.
23006 30-70 mm 4.60 € Comprar Disponible, envio en 1 o 2 diás.
23020.03 Rope thimble 0.50 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Placa brida para anclaje de vientos

Construcción elegante que evita que los vientos y los cables de las antenas se enreden. Esto sucede frecuentemente en la parte alta de los vientos.
Disco de metal sólido, el hueco para el cable de guía es suficientemente ancho (25mm) para acomodar la mayoría de los conectores de rotores. El mismo producto se puede usar para sujetar un mástil a diferentes alturas: se incluyen en el envío cojinetes para mástiles de 50, 40, 30 y 20 mm de diámetro. Por supuesto el mástil se puede seguir girando por dentro de la placa. Max. mast diameter 55mm.

  • Medidas/Peso
  • Peso: 1060g
  • Diámetro: 195mm
  • Espesor: 8mm
  • Diámetro Mástil: 20, 30, 40, 50, 55mm
Articulo No.
23050 38.50 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió