Antennes sur vitre


Antenne sur vitre


On-glass mount antennas have many benefits: you don't need to drill a hole in the chassis, the radiator can be removed when going through a car wash, and when changing to a new car the outside unit is available separately. The low profile outdoor unit (base) is glued to the window with a special glue, and can be removed if necessary (for example when selling the car). This is perfect also for rental or leased cars, where drilling a hole is no option.

The SWR is adjusted with a small trimmer in the inside unit. The supplied RG-58 cable is 4m long (5m with model 15012), the included clips allow a clean installation inside the vehicle. The maximum power is 50 W with a properly aligned antenna. The radiator can be removed with a simple screwdriver, no need for special tools. The inclination of the radiator can be adjusted from 0 to 90°.



Antenne de vitre double bande

The dual-band antenna offers all benefits of glass-mount antennas: No need to drill a hole, easy and simple installation, no problems when changing to a new car. This VHF/UHF antenna has only one connection, which allows you to use nearly any current V/UHF transceiver.

The included cable has a PL connector. When using a real twin bander with built-in diplexer simultaneous duplex operation is possible. For example with the kenwood TM-D710E - use APRS on VHF and chat on UHF at the same time! The max. power is 50 W per band. The radiator is 70cm long, the supplied cable is 5m long.

Réference
15012 Antenne Bi-bande VHF/UHF 56.40 € Acheter
15012.01 Radiateur et base, piece de rechange 29.90 € Acheter
15102 Kit de montage pour 15012 7.40 € Acheter
Info frais de port

Example Installation of an 'On Glass Antenna'

OM W. from Karlsruhe was so kind and let us take pictures of his installation of a dual band antenna 15012 on his 'Smart' car. It shows nicely that this antenna even works on a tinted sun roof!

Dual band OnGlass Antenna on a Smart car

Antennes de vitre CB

Antenne pour la radio 11m CB , longueur du brin rayonnant. 75cm. bon rendement: le radiateur a une self de charge à la base, Le coupleur contient un capacité pour un meilleur réglage du TOS.

Réference
15020 Antene CB de vitre 50.50 € Acheter
Info frais de port

Vue d'ensemble sur les antennes de vitre


15009.xx
##artikelnummer Gamme de fréquence Longuer du radiateur Gain Connecteur Câble Prix
15012 Bi-bande 2m/70cm ca. 70cm 0 dB PL 5m RG-58 56.40 € Acheter
15020 CiBi (11m) ca. 75 cm - offen 4m RG-58 50.50 € Acheter
15030 4m 68-86 MHz ca. 77 cm - offen 4m RG-58 59.50 € Acheter
15008.01 430-460 MHz ca. 28 cm 0 dB BNC 4m RG-58 11.30 € Acheter
15008.02 430-460 MHz ca. 28 cm 0 dB TNC 4m RG-58 Pas disponible au moment, desolé.
15008.03 430-460 MHz ca. 28 cm 0 dB FME 4m RG-58 Pas disponible au moment, desolé.
15009.03 870-960 MHz (GSM900) ca. 35 cm 3 dB Mini-UHF 4m RG-58 11.30 € Acheter
15009.04 870-960 MHz (GSM900) ca. 35 cm 3 dB FME 4m RG-58 11.30 € Acheter
  • Inclus dans la livraison:
  • Embase d'antenne
  • Radiator
  • Coupleur interne avec 4m de cable
  • 3 guides auto adhésifs
  • Kit de montage
  • Instructions d'installation
Autres produits:
Réference
15012.01 Pièces detachable exterieur (base, radiateur) pour ref. 15012 29.90 € Acheter
15100 Kit adhesive pour 15011, 15013 a 15040 5.20 € Acheter
15101 Kit de montage pour 15003, 15008, 15009 6.70 € Acheter
Info frais de port

Note:
Les modèles 15020 et 15030 ont un cable inclus, mais sans connecteur. Il faut acheter un connecteur propre pour RG-58 et votre radio..

Note:
Certains modèles de voitures ont des vitres avec traitement athermique qui est électriquement conducteur et ne peuvent être utilisées pour fixer ces antennes. S'il vous plait, renseignez vous auprès du fabricant ou de votre distributeur.

Z-07M/Z-10M Diamond Dual Band Adhesive Antennas Nouveau

Diamond Z10M

The Z-07M and Z-10M are efficient dual band antennas for 2m and 70cm, which offer a completely new way of installing antennas. The low profile base is attached to clean and flat surface by means of a strong self sticking tape. No more mechanical work, no more drilling huge holes in the chassis of the car! The type of installation is perfectly suitable for vehicles with glass fibre reinforced cabins like RVs or the alcove on top of a truck. Due to the electrical design as 'radial-less' antenna, the Z-07M and Z-10M do not require the metallic surface as a counterpoise. So these antennas will work at places where others cannot be installed due to mechanical or electrical reasons. Of course you can install these antennas also on a glass roof of a car, or even a glass window at home.

The radiators of the Z-07M and the Z-10M can be tilted in two directions and can be easily removed when driving through a car wash, the required tools (hex wrench) is included. The supplied cable is a japanese cable type 2D-LFB-S with approx. 4 mm outer diameter and 5m length. The PL connector at the end can be removed, so that the cable can fit into narrow ducts and holes of the chassis. The antenna weighs only 270 g or 290 g which makes it suitable for use as vehicle antenna at higher speeds.

Z-07M Z-10M
Gamme de fréquence 144 MHz
430 MHz
Longuer 70cm 86cm
Gain 144MHz
430MHz
2.15 dBi
5.9 dB
2.15 dBi
5.5 dB
Puissance maxi 60 W FM
Impedance 50 Ω
Connecteur PL mâle, détachable
Câble 5m, Type 2D-LFB-S
TOS ≤ 1.5:1
Radial-less 144MHz:
430MHz
Oui
Oui
Oui
Oui
Structure 144MHz:
430MHz
1/2 λ
2x 5/8 λ
1/2 λ
2x 5/8 λ
Poids 290 g 270 g
Réference
15015 Diamond Z-07M Dualband Adhesive Antenna 70cm 119.00 € Acheter Nouveau
15016 Diamond Z-10M Dualband Adhesive Antenna 86cm 119.00 € Acheter Nouveau
Info frais de port
Diamond Z07M
Removable PL connector (c) WiMo Removable PL connecteor