WLAN antennas 2.4GHz
Omni directional indoor antennas

Antennas with omni directional pattern for indoor use.
Usage: To supply indoor areas like offices, halls etc. with wireless LAN. Depending on model, the antennas are mounted to the wall or ceiling, or can be placed in a bookshelf or similar.

Equipment antennas

  WiFi equipment 7 dBi WiFi equipment antenna 5 dBi WLAN Aufsteckantenne 3 dBi Wifi equipment antenna 2 dBi Wifi equipment antenna Wifi equipment antenna wifi equipment antenna  
  Dualband Antenna with knuckle Antenna with knuckle Antenna with knuckle Antenna with knuckle Antenna with knuckle Antenna with straight connectors Antenna with 90° angled connector Antenna with 90° angled connector Antenna with 25cm cable and Velcro™ fixation  
Type 17400 17015.9xxx 17015.7xxx 17013.xxx 17012.xxx 17010.10xxx 17010.11xxx 17010.11N 17010.12  
Frequency range 2400 - 2485
2350 - 2500 2350 - 2500 2350 - 2500 2350 - 2500 2350 - 2500 2350 - 2500 2350 - 2500 2350 - 2500 MHz
Electrical model Stacked halfwave dipoles Multiple Stacked halfwave dipole Multiple Stacked halfwave dipole Stacked halfwave dipole Halfwave dipole Halfwave dipole Halfwave dipole Halfwave dipole Halfwave dipole  
Impedance 50 50 50 50 50 50 50 50 50 Ω
SWR 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0  
Gain 3/5 9.0 7.0 5.0 3 2.1 2.1 2.1 2.1 dBi
Cover Polyurethane, black  
Connector RP-SMA RP-SMA
or N
or N
Length 220 400 300 200 140 95 77 93 85 mm
Cable length - - - - - - - - 250 mm
Order No.
Connector SMA
- - - 17013
17.50 € Buy now
14.70 € Buy now
10.00 € Buy now
12.40 € Buy now
- 17010.12
10.40 € Buy now
Order No.
Connector RP-SMA
20.70 € Buy now
28.30 € Buy now
26.10 € Buy now
17.50 € Buy now
14.70 € Buy now
13.60 € Buy now
14.10 € Buy now
- -  
Order No.
Connector RP-TNC
- 17015.9RTNC
29.30 € Buy now
27.00 € Buy now
18.60 € Buy now
17.10 € Buy now
- - - -  
Order No.
Connector N
- 17015.9N
36.80 € Buy now
32.20 € Buy now
25.30 € Buy now
- - - 17010.11N
16.60 € Buy now
Download: Datasheet 17010.10 (PDF, EN, 380KB)
Download: Datasheet 17010.11 (PDF, EN, 420KB)
Download: Datasheet 17010.11REV (PDF, EN, 420KB)
Download: Datasheet 17010.12 (PDF, EN, 250KB)
Download: Datasheet 17012.xx (PDF, DE/EN, 610KB)
Download: Datasheet 17013.xx (PDF, DE/EN, 480KB)
Download: Datasheet 17015.xx (PDF, DE/EN, 570KB)
Download: Datasheet 17400 (PDF, DE/EN, 170KB)

RP-SMA aka R-SMA or Reverse-SMA. Fits without adaptor to PCI boards, many devices by Netgear, D-Link etc. In case of dount please ask us.

RP-TNC aka R-TNC or Reverse-TNC. Fits without adaptor to many devices by Linksys, Cisco etc. In case of doubt please ask us.

SMA if used with WIFi equipment require adaptor 42880 to RP-SMA in most cases.

Looking for a magnet base for these antennas? Please click here: Mini magnet base for SMA antennas.

Robust Rubber Antenna for 2400 MHz

While in conventional antennas for consumer applications, rather does not expect that these or similar on mobile data terminals are used which are then often treated according to rough, is described here HD series better for such applications suitable. We are still not secure, that is not expected in the long run with defects, if the devices are worn on the antennas, or are thrown together with the antenna in the trunk! Three versions are available:
· linear Antenna
· 90° bent Antenna
· Antenna with knuckle 0-90°
Even when there's an antenna is designed with a fixed 90-degree angle, yet the use of an articulated joint can be useful. In case of doubt then that is on the knuckle, not the device built-in antenna jack ... All models are available with SMA or RPSMA connectors.

17009 17009RA 17009K
17009 17009RA 17009K
Length 115 mm 135 mm 145 mm
Anschluß SMA
17009.SMA 11.30 € Buy now 17009RA.SMA 12.40 € Buy now 17009K.SMA 15.90 € Buy now
Anschluß RPSMA
17009.RSMA 11.30 € Buy now 17009RA.RSMA 12.40 € Buy now 17009K.RSMA 15.90 € Buy now
Download: Datenblatt 17009 (PDF, DE/EN, 90KB)
Download: Datenblatt 17009RA (PDF, DE/EN, 90KB)

Splash proof 2.4GHz Antennas, IP54


Splash proof 2.4GHz Antennas, IP54

Model 17014.IPEX with 6 mm thread bolt and 13cm log cable with IPEX (U.FL®) connector. The seal between antenna and housing must be provided by the customer. Length 114mm, gain 1 dBi. Comes complete with nut and lock washer.

Model 17014.RSMA with Reverse SMA connector. Seal between RP-SMA connector an antenna body is achieved with a special gasket integrated into the antenna. The seal between RPSMA connector and RPSMA socket must be provided by the customer. Length 150mm, gain 3 dBi.

Order No.
17014.IPEX 13.80 € Buy now
17014.RSMA 15.00 € Buy now
Info freight charges
Download: Datasheet 17014.IPEX (PDF, DE/EN, 42KB)
Download: Datasheet 17014.RSMA (PDF, DE/EN, 420KB)

Suitable for antenna 17014.RSMA: IPEX (U.FL) Adaptor cable with RP-SMA jack flange mount with gasket, length 10cm.

40350.SFR-X 16.30 € Buy now

New Mini Antennas IP65 for 2.4 GHz and Dual band 2.4 + 5 GHz

Mini Antennas WLAN/ISM

Miniature equipment and machine antennas, well suitable for machine to machine (M2M) communication on 2.4 and/or 5GHz wifi and ISM bands. Very robust construction, weatherproof, protection category IP65 (dust tight, water jets). The antenna have a very simple to use one-hole mount, the 30cm long cable is fed to the interior though this hole. The mounting surface can be of any material (metal, plastic wood). The protruding height of the antenna ranges from 13 to 22mm, depending on model, the diameter is 22mm. The antenna has 30cm teflon cable attached, the connector is Reverse-SMA.

Order No.
18609.0 Mini Antenna 2.4GHz, IP65, 0 dBi, 30cm cable, RP-SMA 15.00 € Buy now
18609.2 Mini Antenna 2.4GHz, IP65, 2 dBi, 30cm cable, RP-SMA 16.30 € Buy now
18609.2.DUAL Mini Antenna 2.4/5GHz, IP65, 2 dBi, 30cm cable, RP-SMA 16.70 € Buy now
18609.X01 Plastic nut, spare part, black 1.15 € Buy now
Info freight charges

Tilting Equipment Antenna 2.4GHz


Rotateable and tiltable antenna for Wifi devices. Suitable for flexible mounting options on various Wifi devices in industry and office equipment. The antenna is supplied with a plastic socket which is installed in the enclosure wall. The socket receives the antenna and allows rotating by 180°. The antenna has a knuckle which allows tilting of 0 to 90°. Included is an attached teflon cable with 15cm length and IPEX/U.FL connector. Gain 2 dBi, length 90mm, weight 5g.

Order No.
18545 2.4GHz Tilting Equipment Antenna 8.50 € Buy now
Info freight charges

Watertight Antennas with protection class IP68


Series of robust, dust and waterproof antennas for industrial applications, protection class IP68. Antennas are available for 430, 8681800/1900 and 2400MHz. The coaxial connector (SMB type) is housed in a protected screw cap.

The antennas are used for typical industrial applications like Zigbee, Bluetooth, Wifi GSM or ISM remote control. The installation at the enclosure is done with a single hole mount with 150cm RG-174 cable attached, open ended. WiMo offers various connectors for the cable type, installation on request.

The antennas have an approximative gain of 2 dBi, omnidirectional radiation, impedance 50Ωm length 92mm.

Order No.
14210.440 Buccaneer Antenna 420-470 MHz, IP68 12.00 € Buy now New
14210.868 Buccaneer Antenna 868/1800/1900 MHz, IP68 14.50 € Buy now New
14210.SO Buccaneer Single Hole Mount IP68, 150cm Cable RG-174, open 15.80 € Buy now New
42901.316 SMA connector, crimp, RG-174 4.70 € Buy now
42901.316REV RP-SMA connector, crimp, RG-174 4.45 € Buy now
42075.316 BNC connector, crimp, RG-174 1.70 € Buy now
42402.316 TNC connector, crimp, RG-174 2.60 € Buy now
42955 MCX connector, angled, crimp, RG-174 6.20 € Buy now
42960 MMCX connector, angled, crimp, RG-174 6.20 € Buy now
42750 SMB connector, straight, crimp, RG-174/RG-316 5.50 € Buy now
42755 SMB-connector, angled, crimp, RG-174/RG-316 3.50 € Buy now
99ANSCHLAGEN Service, Installation of one connector 5.00 € Buy now
Info freight charges

Stubby Antennas 868 or 2400 MHz


Series of small stubby antennas for short range communication in industrial environments. Available for 2.4GHz (Wifi, Bluetooth) and 868/900/1800 MHz (ISM, GSM). Suitable for portable equipment and machines, small and unobtrusive. Straight or angled SMA or RP-SMA connector. Length 32mm, gain 0 dBi, weight approx. 5g.

Order No.
17006.868SMA Stubby Antenna, SMA connector, 868/900/1800MHz 13.80 € Buy now
17006.SMA Stubby Antenna, SMA connector, 2400-2483MHz 12.80 € Buy now
17006.RSMA Stubby Antenna, RP-SMA connector, 2400-2483MHz 12.80 € Buy now
17007.868SMA Stubby Antenna, SMA connector angled, 868/900/1800/1900MHz 10.40 € Buy now
17007.SMA Stubby Antenna, SMA connector angled, 2400-2483MHz 10.40 € Buy now
17007.RSMA Stubby Antenna, RP-SMA connector angled, 2400-2483MHz 10.40 € Buy now
Info freight charges
Datasheet 17006.868SMA (PDF, DE/EN, 160KB)
Datasheet 17006.(R)SMA (PDF, DE/EN, 160KB)
Datasheet 17007.868SMA (PDF, DE/EN, 160KB)
Datasheet 17007.(R)SMA (PDF, DE/EN, 160KB)

Magnet base antenna

Gain 5 dBi, stacked radiator, black, length 12cm. Includes high quality cable CLF-100, 150cm long, Connector is RP-SMA or SMA connector, fits on most PCI cards and many routers. Very solid antenna, suitable for travels, weatherproof for use on a car (war driving).

Order No.
20109.RPSMA with RP-SMA connector 21.90 € Buy now
20109.SMA with SMA connector 21.90 € Buy now
Info freight charges
Download: Datasheet Antenna 20109 (PDF, DE/EN, 290KB)

Magnet base RP-SMA

Magnetfuss Is your antenna hidden below the desk?
That's the worst position to install a WiFi antenna... Magnet base with 55 mm diameter, RP-SMA jack, with 1 or 2m cable with RP-SMA plug, or 2m cable with Lucent (aka MC-Card) or MMCX plug. Ideal extension to place the original antenna at a better position, works also with our model 17010.13REV.
Order No.
20123.2 2m cable with RP-SMA 21.90 € Buy now
Info freight charges

MIMO Antenna stand

20128 Antenna stand

When your WiFi router is installed below the desk the transmission of radio frequencies is greatly hindered... get your antennas out of the hole and on your desk or on the wall and extend the range of the WiFi LAN. Includes 1.5m long cables, connector RP-SMA /plug/jack.
You can use the antennas supplied with your router or use our high gain antennas like the article 17015.9RSMA (see above). Available with three antenna sockets.

The antenna stand is also suitable for wall mounting 20128.x also suitable for wall mounting
Order No.
20128.3 for 3 antennas 33.90 € Buy now
Info freight charges

Universal suction cup holder

23136 (Antenna not included)

For light antennas. The 6 mm holes can take an SMA/RP-SMA flange mount socket or a pigtail with such a connector. Made from steel (powder coated), so it is also useable for small magnet mount antennas.

Order No.
23136 9.90 € Buy now
Info freight charges

NB-2400 Notebook antenna 2.4GHz

Notebook Antenne WLAN Wifi NB-2400 NB-2400

Antenna to retro-fit suitable notebook PCs. Many up-to-date notebooks are prepared for WiFi/wireless LAN. Usually this requires a mini-PCI module, which allows connection of two antennas with U.FL connector. Suitable for any 802.11B or 802.11 g system.
The antennas are usually installed in the display lid, many recent computers are prepared for such an installation.
The cable is 60cm long, sufficient for most notebook sizes. Gain approx. 2 dBi, nearly omni-directional radiation.

The size of the antenna element itself is 40 x 10 and has three holes for mounting.

Please note that WiMo cannot perform this installation. You install this antenna at your own risk.

Order No.
18540 NB-2400, 60cm cable with U.FL connector 8.60 € Buy now
Info freight charges

LPA-Multi Glass mount antenna


Small and unobtrusive 2.4GHz patch antenna to be mounted on glass, plastic, wood etc. (cupboard, cubicle wall etc.), also suitable for car use. Approx. 12cm long, 2cm wide. Ideal for the PC with the antenna below the desk and without connection to the local WLAN. Or stick it to the window to extend coverage to the garden or terrace. Includes 250cm cable with various connectors.

18621.SMA: like 18620, but with 1,5m cable and SMA-Connector. 15.4cm long, 2.9cm wide. Weight 38g.

Order No.
18620.RPSMA with RP-SMA connector 26.50 € Buy now
18620.SMA with SMA connector 26.50 € Buy now
18620.FME with FME jack 28.80 € Buy now
18621.SMA with SMA connector 26.50 € Buy now
Info freight charges

As 18620, but for 2.4 and 5GHz Dualband. 150cm cable, RP-SMA connector.

Order No.
18619 Dualband 2.4/5GHz Glass Mount Antenna 19.80 € Buy now
Info freight charges

Omni directional antennas with N connector (male)

Use indoors or outdoors, either mount to wall with optional bracket (see below), or mount on top of equipment rack. For vehicle use (antennas are weatherproof) suitable N base mounts are available. MG-200 with spring at the base, very solid, the VC-2400-xxx series are without spring.

VC-2400 VC-2400-7 VC-2400-9 MG-200
  VC-2400 VC-2400-7 VC-2400-9 MG-200
Gain 4,5 dBi 7 dBi 9 dBi 7 dBi
Weight 110 g 180 g 250 g 300 g
Length 26 cm 45 cm 61 cm 60 cm
Color Black White White Black
Article No. 18610 18617.07 18617.09 13018
Price 74.80 € 81.40 € 105.00 € 59.00 €
Order No.
18610 VC-2400 Omni 2.4GHz, 4.5 dBi 74.80 € Buy now
18617.07 VC-2400-7 Omni 2.4GHz, 7 dBi 81.40 € Buy now
18617.09 VC-2400-9 Omni 2.4GHz, 9 dBi 105.00 € Buy now
13018 MG-200S Omni 2.4GHz 59.00 € Buy now
Info freight charges

Magnet base for VC-2400 antennas


Black base, approx. 75 mm diameter, with 2m Low-Loss coaxial cable, with N female and RP-SMA or N connector. The base has an integrated magnet which eases the installation for example on an equipment rack, but which is not suitable for mobile use on a car.

Order No.
20125 2m cable, RP-SMA 21.90 € Buy now
20125.N 2m cable, N 19.00 € Buy now New
Info freight charges

Mounting bracket

For wall mount of antennas like MG-200, VC-2400 (18615.N) or all other antennas with SMA or TNC connector (18615.SMA, 18615.TNC).
Versatile use: the 16 mm hole takes any N connector, cable sets or pigtails with N panel jacks, the antenna is then mounted on top of this N jack. Use cable harness Order No. 20052, Pigtail with N jack Order No. 40300.N-F, or N panel mount Order No. 42055. Material aluminum, includes screws etc.
Universal bracket for smaller antennas with SMA (or Reverse-SMA) connector. Install any suitable SMA jack (panel mount), various pigtails etc. into the bracket, the antenna is the mounted on top of the jack. Material aluminum, includes all screws etc.
As above, but with 13 mm hole for TNC or RP-TNC flange mount jacks.

Large mounting bracket (shown with N pigtail, not included)

Small mounting bracket (shown with SMA pigtail, not included)
Order No.
18615.N Mounting bracket, large 7.85 € Buy now
18615.SMA Mounting bracket, small for SMA/RP-SMA 7.85 € Buy now
18615.TNC Mounting bracket, small for TNC/RP-TNC 7.70 € Buy now
Info freight charges

Desktop antenna CA-2400

CA-2400 WLAN desktop antenna pic

Antenna includes radiator, base and 1m cable. Various connectors available, see below. Suitable without adaptor for almost all PCI boards, many Netgear devices, nearly all D-Link devices (RP-SMA) or Cisco and Linksys products (RP-TNC), some PCMCIA cards (Lucent or MMCX). Solid base for desktop use, with the same base also suitable for wall mounting. Omni directional radiator with 6 dBi gain, ideal antenna to extend the range in a office or home environment.

Order No.
18550 with RP-SMA connector 15.00 € Buy now
18550.RPTNC with RP-TNC connector 15.00 € Buy now
Info freight charges

HO-2400 and HO-2400/5000 Omni-directional radiator for ceiling mount

HO-2400 Ceiling Antenna

With the antenna mounted on the ceiling environmental influences are reduced to a minimum, making this antenna ideal for illumination of larger rooms and hallways (hotels, lobbies, offices etc.). Vertically polarized with vertical HPBW angle of 40°, Gain 2 dBi. Connector SMA jack, white case. Very unobtrusive, looks similar to a smoke detector. Diameter 80mm, height 42mm. Max. ceiling thickness 2cm.

Order No.
18607 HO-2400, 2.4GHz 18.40 € Buy now
18607.RPSMA HO-2400 with 1.8m Cable and Reverse-SMA Connector 44.90 € Buy now
Info freight charges
Datasheet HO-2400 antenna (PDF, EN, 335KB)

HCT-2400 Rugged M2M Antenna

18608 Nylon M2M Antenna Wifi 2400MHz HCT-2400

Very robust Wifi antenna in Nylon casing!
The HCT-2400 is a compact and robust Wifi 2.4GHz antenna for installation on flat surfaces like a machine wall or roof of a kiosk terminal or the sheet metal of a vehicle. Due to the use of Nylon this antenna is resilient against adverse environments, making it suitable for use in the chemical or mining industry. The industrial application of the HCT-2400 is also supported by the wide temperature range of -40 to +85°C.

The case is protected class IP67 when mouted, a rubber gasket on the lower side is used for additional proetction. The antenna is mounted by a single hole mount. A central stub (17 mm Ø × 23mm) is used to install the antenna with a screw from the inside. The cable (300cm RG-174, SMA connector) is also fed through this central stub. This makes installation of the antenna very simple and easy. The diameter of the HCT-2400 is 50mm, height 47mm, weight 80g.

The gain of the HCT-2400 antenna is 2 dBi, the radiation characteristic is omni-directional. This makes this antenna suitable for machine-to-machine communication in production environments or for unbtrusive outdoor access points or client terminals. Another range of application is the installation on vehicles (forklifts) or on systems used in public events.

Also available as 5GHz (5100 – 5800 MHz) version with 3 dBi gain, cable 3m RG-316.

Order No.
18608 HCT-2400 2.4GHz 2 dBi, Nylon M2M Antenna 33.40 € Buy now
18608.5 HCT-5000 5GHz 3 dBi, Nylon M2M Antenna 40.30 € Buy now New
Info freight charges
Datasheet HCT-2400 Antenna (PDF, EN, 1335KB)
Datenblatt HCT-5000 Antenne (PDF, EN, 27KB)