Transceiver da Yaesu

Yaesu FTDX-1200 Shortwave/50MHz Transceiver

The FT-DX1200 is another transceiver in the successful FT-DX series. As a smaller model of the FT DX3000D the FT-DX1200 benefit from its features. Also in this transceiver DSP and fast antenna tuner was included.

Also in the FT-DX1200, the new TFT display is again so that you can see the bandscope and all settings of the transceiver with one view. The extensive menu is very easy to use because of the size of the display and the navigation through this very simple. All menu items are displayed clearly and using the navigation key right next to the diplay are also sub-items for the basic setting easy to reach.

In contrast to the FT-DX3000D, the FT-DX1200 has no 2nd Frequencie Display.The entire right front side represents controls and the VFO knob available and so allows for a stress-free handling.

For Digital modes FT-DX1200 is well prepared. Directly on the TFT display can even encode and decode RTTY and PSK31 signals. Even CW can be read directly on the display with the optional FFT-1 unit. Over the various sockets on the back, the transceiver is ready to go to work with a computer and a soundcard interface.

Option FFT-1
The FFT-1 is an optional board for installation the trensceiver. The FFT-1 enables the following additional functions::

  • RTTY and PSK31 Decoder, display received text on the LC display
  • CW Decoder, display received text on the LC display
  • CW Auto Zero, automatic tuning on zero beat in CW

Option DVS-6
The DVS-6 is an optional board for installation in the transceiver. The DVS-6 is a voice recorder/keyer which allows to record and transmit 5 audio tracks, each up to 20 sec long. This is especially useful for a contest. Il DVS-6 richiede l'opzione FH-2!

Ordine No.
FT-DX1200 Yaesu FT-DX1200 Shortwave Transceiver 1249.00 € Ordina
99FREQGROSS Frequency Extension Please see note! 40.00 € Ordina
Info sui costi di spedizione
Download: FT-DX1200 Brochure (PDF, EN, 6.3MB)

Accessori FT-DX1200

Dust Cover Dust cover
Ordine No.
ADMS-DX1200 Programming Kit, for details see CAT-Interfaces 56.40 € Ordina
CT-118 Yaesu Band Data Cable 45.00 € Ordina
CT-39A Yaesu Packet interface cable, 6-pin Mini-DIN/open 19.10 € Ordina Nuovo
CT-39.01 Packet interface cable, 6-pin Mini-DIN/open 9.50 € Ordina Nuovo
DC-FTDX1200 Dust cover for FT-DX1200 36.00 € Ordina Nuovo
DVS-6 Voice Keyer 45.80 € Ordina
FC-40 Autom. Tuner for long wire antennas 275.00 € Ordina
FFT-1 Yaesu FFT-1 Interface 129.70 € Ordina
FH-2 Tastiera per Voice/CW-Keyer 35.40 € Ordina
MD-100A8X Yaesu Desk Microphone 125.00 € Ordina
MD-200 Yaesu Desk Microphone 271.40 € Ordina
M-1 High-End Desktop microphone 699.00 € Ordina Nuovo
MH-31B8 Handheld Microphone (as inluded) 44.90 € Ordina
MTU-160 MicroTune Unit (Filter) 160m 669.00 € Ordina
MTU-3020 MicroTune Unit (Filter) 30 und 20m 499.00 € Ordina
MTU-8040 MicroTune Unit (Filter) 80 und 40m 499.00 € Ordina
PHITS-Y2000 Phonema kit for SP-2000Y 49.00 € Ordina Nuovo
SCU-17 Yaesu SCU-17 Interfaccia CAT/Scheda Audio USB (SCU-17 dettaglio) 129.00 € Ordina
SCU-28 Cavo per amplificatore, connettore a 10 pin, dall'altro lato aperto 32.50 € Ordina
SP-2000Y Yaesu Desktop speaker 188.00 € Ordina Nuovo
SP-20 Yaesu External Sound Speaker 179.00 € Ordina Nuovo
YH-77STA Yaesu, lightweight head phones 99.00 € Ordina
Info sui costi di spedizione

Specification FT-DX1200

Specification Yaesu FT-DX1200
RX Frequency Range General Coverage Reception from 30 kHz to 56 MHz
TX Frequency Ranges 1.8 - 29.7 MHz, 50 - 54 MHz (Amateur bands only)
Frequency Stability ±0.05 ppm, after 1 minute @ -10 °C ~ +60 °C
Operationg Temperature Range -10 °C ~ +60 °C
Emission Modes A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
Frequency Steps 1/5/10 Hz (SSB,CW, & AM), 100 Hz (FM)
50 Ω, unbalanced
16.7 - 150 Ω, unbalanced (Tuner ON, 1.8 - 29.7 MHz Amateur bands)
25 - 100 Ω, unbalanced (Tuner ON, 50 MHz amateur band)
Power Consumption Rx (no signal) 1.8A
Rx (signal present) 2.1A
Tx (100 W) 23A
Supply Voltage DC 13.8V ± 10%
Misura (WxHxD) 365 x 115 x 312 mm w/o knob and connector
Peso (approx.) 9.5 kg
Power Output 5 - 100 Watt (2-25 W AM carrier)
Modulation Types J3E (SSB): Balanced
A3E (AM): Low-Level (Early Stage)
F3E (FM): Variable Reactance
Deviazione mass. (FM) ±5.0 kHz / ±2.5 kHz
Harmonic Radiation Better than -60 dB (160 - 10m amateur bands)
SSB Carrier Suppression At least 60 dB below peak output
Undesired Sideband Suppression At least 60 dB below peak output
Audio Response (SSB) Not more than -6 dB from 300 to 2700 Hz
3rd-order IMD -31 dB @14 MHz, 100 watts PEP
Bandwidth 500 Hz (CW)
3.0 kHz (LSB, USB)
6.0 kHz (AM)
16 kHz (FM)
Microphone Impedance 600 Ω (200 to 10 k Ω
Circuit Type Triple-conversion superheterodyne
Intermediate Frequencies 40.455MHz / 455 kHz / 30 kHz (24 kHz for AM/FM)
Sensitivity SSB (2.4 kHz, 10 dB S+N/N)
0.16 μV (1.8 - 30 MHz, AMP2)
0.125 μV (50 - 54 MHz, AMP2)*
AM (6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
2 μV (0.5 - 1.8 MHz, AMP2)
2 μV (1.8 - 30 MHz, AMP2)
1 μV (50 - 54 MHz, AMP2)
FM (BW: 15 kHz, 12 dB SINAD)
0.5 μV (28 - 30 MHz, AMP2)
0.35 μV (50 - 54 MHz; AMP2)
There is no specification in frequency ranges not listed.
Squelch Sensitivity (AMP2) SSB/CW/AM
2 μV (0.1 - 1.8 MHz)
2 μV (50 - 54 MHz)
1 μV (28 - 30 MHz)
1 μV (50 - 54 MHz)
There is no specification in frequency ranges not listed.
Selectivity (-6/-60 dB) Mode -6 dB -60 dB
CW 0.5 kHz or better 0.75 kHz or less
LSB/ USB 2.4 kHz or better 3.6 kHz or less
AM 6 kHz or better 15 kHz or less
FM 12 kHz or better 30 kHz or less
Image Rejection 70 dB or better (1.8 - 29.7 MHz amateur bands)
60 dB or better (50 MHz amateur band)
Potenza mass. audio 2.5 W into 4 Ω with 10% THD
Audio Output Impedance 4 to 8 Ω (4 Ω nominal)
Conducted Radiation Less than 4000 nW

Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are guaranteed only within the amateur bands.

Frequency Extension for Radios

Please note:
All radios supplied by WiMo normally cover only the amateur bands (transmit wise).

The frequency extension of a radio (TX open) is done on explicit request by the customer.

Amateur Radio transceivers are usually not specified for use outside the amateur bands. In some cases the radio and especially the final amplifier or output filters can be damaged when transmitting outside the amateur bands. These damages are not covered by any warranty.

The manufacturer warranty might be voided in some cases as well.