Transceiver da Yaesu


Yaesu FT-DX5000MP LTD (w/o SM-5000) Premium Class Shortwave/50MHz Transceiver

FT-DX5000MP FT-DX5000MP

Aside from the FT-DX9000 the FT-DX5000 is the flag ship of Yaesu shortwave transceivers. An excellent main receiver, working as a double superhet with 9MHz 1. IF is complemented with an independent second receiver (triple superhet, 40MHz 1.IF). This concept is perfect for the demanding DX chaser or contester, whether at home or in a DX location. The main receiver achieves top values, for example a non-blocking dynamic range of up to 112 dB, with a 3rd order IP of 40dB. These superb values are also independently verified by Sherwood Engineering Inc. (USA), who list the FT-DX5000 at the top position in their receiver list.

Yaesu arrives at such excellent receiver values by using numerous roofing filters. The FT-DX5000 includes the following roofing filters: 600Hz, 3, 6 and 15 kHz. The model FT-Dx5000MP has a further 300Hz filter installed, which can be retrofitted to other models as well.

The FT-DX5000 is supplied with a built-in 230V AC power supply, operation with 13.8V is not possible. The power supply has enough 'juice' for the MOSFET finals, which run on 48V with a very good linearity. The max. output power of all FT-DX5000 models is 200 W (75 W in class A operation).

FT-DX5000

Last but not least both receivers are supported by a state of the art IF DSP. This system allows to set nearly any IF bandwidth for any mode. Audio peak filters raise and limit the audio, perfect for much better intelligibility, variable automatic or manual notch filters suppress interferences. Further the IF DSP is used for noise reduction, a perfect transmit modulation and much more.

The FH-2 keypad and also the Microphone MH-31B8 is included in the shipment of the FT-DX5000D!

"Holiday Greetings" Promotion Q4 / 2016

Buy your new Yaesu transceiver now and get a cash refund or a free option from Yaesu!

  • FT-DX5000 300,00 € cash back
  • FT-DX3000 200,00 € cash back
  • FT-DX1200 100,00 € cash back
  • FTM-400XDE Camera Microphone
  • FT-2DE Camera Microphone

This promotion is handled directly by Yaesu, it is not handled by WiMo! You must send the requested documentation directly to Yaesu UK by postal services. This promotion is only valid for radios which have been bought during the valid timeframe.

For further details please check the following form:


Promotion valid from 1. October – 31. December 2016.

Ordine No.
FT-DX5000MP Yaesu FT-DX5000MP "Limited Edition" 3649.00 € Ordina
99FREQ Frequency Extension Please see note! 25.00 € Ordina
Info sui costi di spedizione
Download: FT-DX5000 Brochure (PDF, EN, 10.2MB)


Accessories FT-DX5000

Ordine No.
DC-FTDX5000 Dust cover for FT-DX5000 39.00 € Ordina Nuovo
DMU-2000 Data Management Unit 1383.20 € Ordina
FH-2 Tastiera per Voice/CW-Keyer 35.40 € Ordina
MD-100A8X Desktop Microphone 125.00 € Ordina
MD-200 Luxury Desktop Microphon 271.40 € Ordina
MTU-160 Micro Tune Unit 160m 549.00 € Ordina
MTU-3020 Micro Tune Unit 30m/20m 499.00 € Ordina
MTU-8040 Micro Tune Unit 80m/40m 499.00 € Ordina
PHITS-Y2000 Phonema Insulation Kit for Yaesu SP-2000Y 49.00 € Ordina Nuovo
SCU-17 Yaesu SCU-17 Interfaccia CAT/Scheda Audio USB (SCU-17 dettaglio) 140.60 € Ordina
SM-5000 Station Monitor SM-5000 402.20 € Ordina
SP-2000Y Desktop Loudspeaker 188.00 € Ordina
XF-126CN 300Hz Roofing Filter 145.00 € Ordina
YH-77STA Yaesu Lightweight Stereo Headphone (open system) 113.90 € Ordina Nuovo
YH-77STA.X01 Ear pad for YH-77STA (one pair) 9.50 € Ordina Nuovo
Info sui costi di spedizione
Dust Cover DC-FTDX5000 Dust cover
PHITS-Y2000 PHITS-Y2000 Phonema Insulation Kit

Yaesu Station Monitor SM-5000

SM-5000

The Station Monitor SM-5000 is optional available. This monitor offers a graphical spectrum view of the currently selected band. This is very helpful for a quick overview of activity on a band, perfect for contesting and breaking that pile-up. Additionally the SM-5000 offers two built-in loudspeakers, one for each receiver.

Ordine No.
SM-5000 Stationsmonitor SM-5000 402.20 € Ordina
Info sui costi di spedizione

µ-Tune Kit

µ-Tune Kit

µ-Tune Kits are external filters for the bands 160m, 80 + 40m and 30 + 20m. These filters work with a motor driven coil and achieve a very high Q, again increasing the strong signal handling capabilities of the transceiver. The bandfilters require some assembly before use. All required cables are included. Size 330 x 120 x 120mm, weight 2.6kg.

Ordine No.
MTU-160   µ-Tune Kit 160m 549.00 € Ordina
MTU-8040 µ-Tune Kit 80/40m 499.00 € Ordina
MTU-3020 µ-Tune Kit 30/20m 499.00 € Ordina
Info sui costi di spedizione

Data Management Unit DMU-2000

DMU-2000 + Scope-Board

The DMU-2000 is an optional device for the FT-DX5000, FT-2000 and FT-950 and offers some very useful functions. For operation of the DMU-2000 a SVGA monitor is required (not included). Furthermore some functions require a computer keyboard (not included).


  • Spectrum display: This display offers a quick overview of the selcted band, bandwith can be choosen between 25 kHz and 2.5MHz.
  • Audio scope: Offer audio analysis functions of the transmitted and received audio signal, waterfall display for digital modes etc.
  • SWR display: Over a selected band the SWR is measured and graphically displayed. Further some vital parameters like PA voltage, current, temperature etc. can be displayed.
  • Memory management: Shows the 99 internal memories, offers edit of memory names etc. (requires keyboard)
  • World clock: A world map with daylight zone displayed, ideal for greyline DXing. Alarm clock for your next sked.
  • Rotor control: Supports various Yaesu rotors. The screen shows a great circle map (beam map) centered on your home location.
  • Log book: With the optional keyboard a comfortable logging is possible directly to the transceiver and DMU-2000. The log data can be exported later to a CF memory card (supplied) in various formats (Cabrillo, ADIF, CSV, TXT).
  • Menu Setup: The usual menu setup can be done also with the DMU-2000, offering a comprehensive view of all options of the FT-2000 transceiver.
Ordine No.
DMU-2000 Data Management Unit 1383.20 € Ordina
Info sui costi di spedizione

Technical Data FT-DX5000

Dati tecnici Yaesu FT-DX5000
General
RX Frequency Range 30 kHz - 60 MHz (operating)
1.8- 29.7 MHz, 50 - 54 MHz (specified performance, Amateur bands only)
TX Frequency Ranges 1.8 - 29.7 MHz, 50 - 54 MHz (Amateur bands only)
Frequency Stability ±0.05 ppm (MP version, after 1 minute @ -10 °C ~ +60 °C)
±0.5 ppm (after 1 minute @ -10 °C ~ +60 °C)
Operationg Temperature Range -10 °C ~ +60 °C
Emission Modes A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)
Frequency Steps 1/5/10 Hz (SSB,CW, & AM), 100 Hz (FM)
50 Ω, unbalanced
16.7 - 150 Ω, unbalanced (Tuner ON, 1.8 - 29.7 MHz Amateur bands)
25 - 100 Ω, unbalanced (Tuner ON, 50 MHz amateur band)
Power Consumption Rx (no signal) 70 VA
Rx (signal present) 80 VA
Tx (200 W) 720 VA
Supply Voltage AC 90 V - AC 264 V
Misura (WxHxD) 462 x 135 x 389 mm w/o knob and connector
Peso (approx.) 21 kg
Transmitter
Power Output 10 - 200 Watt (CW, LSB, USB, FM, RTTY, PKT)
5 - 50 Watt (AM carrier)
10 - 75 Watt (Class A: LSB, USB)
Modulation Types J3E (SSB): Balanced
A3E (AM): Low-Level (Early Stage)
F3E (FM): Variable Reactance
Deviazione mass. (FM) ±5.0 kHz / ±2.5 kHz
Harmonic Radiation Better than -60 dB (1.8 - 50 MHz amateur bands)
SSB Carrier Suppression At least 60 dB below peak output
Undesired Sideband Suppression At least 60 dB below peak output
Audio Response (SSB) Not more than -6 dB from 300 to 2700 Hz
3rd-order IMD -31 dB @14 MHz, 200 watts PEP
-40 dB @14 MHz, Class A: 75 watts PEP
Bandwidth 500 Hz (CW)
3.0 kHz (LSB, USB)
6.0 kHz (AM)
16 kHz (FM)
Microphone Impedance 600 Ω (200 to 10 k Ω
Receiver
Circuit Type VFO-A; Double-conversion superheterodyne
VFO-B; Triple-conversion superheterodyne
Intermediate Frequencies VFO-A; 9 MHz/30 kHz (24 kHz for AM/FM)
VFO-B; 40.455 MHz/455 kHz/30 kHz (24 kHz for AM/FM)
Sensitivity SSB (2.4 kHz, 10 dB S+N/N)
2 μV (0.5 - 1.8 MHz, IPO1)
0.2 μV (1.8 - 30 MHz, AMP2)*
0.125 μV (50 - 54 MHz, AMP2)
AM (6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
6 μV (0.5 - 1.8 MHz, IPO1)
2 μV (1.8 - 30 MHz, AMP2)*
1 μV (50 - 54 MHz, AMP2)
FM (BW: 15 kHz, 12 dB SINAD)
0.5 μV (28 - 30 MHz, AMP2)
0.35 μV (50 - 54 MHz; AMP2)
There is no specification in frequency ranges not listed.
Squelch Sensitivity (AMP2) SSB/CW/AM
2 μV (0.1 - 30 MHz)
2 μV (50 - 54 MHz)
FM
1 μ (28 - 30 MHz)
1 μV (50 - 54 MHz)
There is no specification in frequency ranges not listed.
Selectivity (-6/-60 dB) Mode -6 dB -60 dB
CW 0.5 kHz or better 750 Hz or less
LSB/ USB 2.4 kHz or better 3.6 kHz or less
AM 6 kHz or better 15 kHz or less
FM 12 kHz or better 30 kHz or less
Image Rejection 70 dB or better (1.8 - 29.7 MHz amateur bands, VRF: ON)
60 dB or better (50 MHz amateur band)
Potenza mass. audio 2.5 W into 4 Ω with 10% THD
Audio Output Impedance 4 to 8 Ω (4 Ω nominal)
Conducted Radiation Less than 4000 μμW

Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are guaranteed only within the amateur bands.

Frequency Extension for Radios

Please note:
All radios supplied by WiMo normally cover only the amateur bands (transmit wise).

The frequency extension of a radio (TX open) is done on explicit request by the customer.

Amateur Radio transceivers are usually not specified for use outside the amateur bands. In some cases the radio and especially the final amplifier or output filters can be damaged when transmitting outside the amateur bands. These damages are not covered by any warranty.

The manufacturer warranty might be voided in some cases as well.