Accessori da Yaesu
Yaesu SCU-17 CAT- and sound card interface with built-in sound card
The Yaesu SCU-17 is an interface to run with digital operating modes for almost all current Yaesu transceivers. The SCU-17 works as a USB sound card, therefore only one USB cable is required between interface and computer. The interface isolates all signals galvanically to avoid potential ground loops. In doing so the audio-in and audio-out, PTT, FSK and CAT signals are transmitted. The key signals are seperated by Opto-isolators, the audio signals by coupling transformers.
The SCU-17 is protected by a metal box to avoid irradiation problems by HF. There are two control knobs on the front panel for the NF-levels (Input, Output). This way the modulation level is adjusted in seconds without having to bother with the sound card dialog of the computer. Furthermore the front panel has three LEDs displaying the status of 'Power', 'PTT' and 'FSK'. The SCU-17 uses the USB port as the power supply.
Shipment already includes several cables, which simplifies the use with current Yaesu transceivers. Some models require an optional cable. The SCU-17 is designed in a way that even transceivers with a classic RS-232 interface can be connected to modern computers via USB.
Installation requires to download and install the "Virtual COM Port Driver" from the website of Yaesu company. Caution: Install prior to connecting the interface to your computer! Drivers can be found on www.yaesu.com under 'Products', 'FT_DX1200', 'Files', 'SCU-17 USB Driver (Virtual COM Port Driver)'.
- Yaesu SCU-17 interface
- Printed user manual (english)
- USB A/B-cable
- NF-cable 2x 6pin Mini-DIN
- Serial cable 2x 9pin D-Sub
- 2x 3.5 mm stereo jack
|FT-450D||same as shipment|
|FT-817ND||Option CT-62 needed|
|FT-857D||Option CT-62 needed|
|FT-897D||Option CT-62 needed|
|FT-950||same as shipment|
|FT-DX1200||same as shipment|
|FT-2000 (Variant 1)||Option SCU-21 needed|
|FT-2000 (Variant 2)||self-made with CT-39/A needed|
|FT-DX5000 (Variant 1)||Option SCU-21 needed|
|FT-DX5000 (Variant 2)||self-made with CT-39/A needed|
|FT-DX9000 (Variant 1)||Option SCU-22 needed|
|FT-DX9000 (Variant 2)||self-made with CT-39/A needed|
Of course, with self-made cables you can connect virtually all other transceivers, of other manufacturers as well. The pin configuration of the SCU-17 interface is specified properly in the user manual.
|SCU-17||Yaesu SCU-17 Interfaccia CAT/Scheda Audio USB||129.00 €||Ordina|
|SCU-21||Optional cable for FT-2000, FT-DX5000||32.50 €||Ordina|
|SCU-22||Optional cable for FT-DX9000||38.50 €||Ordina|
|CT-39A||Yaesu cable 1x 6pin-MiniDIN, other ending exposed||17.50 €||Ordina|
|CT-39.01||Noname Kabel 1x 6pin-MiniDIN, other ending exposed||9.50 €||Ordina|
|CT-62||Yaesu CAT-Kabel||33.00 €||Ordina|
|Info sui costi di spedizione|