Yaesu Accessories

Other Accessories for Yaesu Desktop Transceivers

Yaesu M-1 and M-100 High-End Desktop Microphones

Yaesu M-1 High-End Desktop microphone

With the M-1 and M-100 Yaesu is launching two High-End Desktop microphones. Both come with two microphone elements: a Condenser and a Dynamic element.
With its clear, bright modulation the condenser element is designed for the use in poor conditions or in a DX-Pileup. The dynamic element has emphasis on the lower and middle frequency range. So this element is better suitable for a local QSO or a simple chat.

The M-1 has a built-in 9-band graphic equalizer. Both microphone elments can be adjusted via this equalizer. And that separate for each element or both together. The adjustable ranges of the Equalizer are 63Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz. Once found values can easy be stored in one of the 2 integrated Memorys. Of course you can switch off the graphic equalizer and then the element is bypassed. The built in LC-Display in the base of the M-1 allows you to see all set values quick and comfortable. A also integrated 20s voice recorder (M-1 only) allows you to record and playback.

To optimize the important frequency range from 1kHz to 1,5kHz Yaesu ships both microphones with a "Treble Boost Cowling". An integrated additional microphone amplifier is also available.

For the first time Yaesu uses magnetic switches for the PTT in both models. This is a qualitative advantage to the previously used microswitches in the other models. For a smooth and long keystroke the M-1/M-100 has three Air-Cylinder-Tubes at the PTT-Key. A large, red TX-LED indicator is another feature of this microphone. To prevent you from a accidental transmitting, a PTT-Lock also is available.

The M-1 also has an adjustable headphone socket and a XLR socket.

The supplied cable for the M-1 and M-100 has both connectors, 8pin round and modular. The M-1 also supportx XLR. The M-1 microphone has a 5V supply input, the power supply is included. The M-1oo model is supplied by most transceivers directly.

The model M-100 uses the same hi-quality microphone elements and the same enclisure and cowling, but the base is designed differently. The M-100 does not have an equalizer, no headphone connector and no XLR connector. The power supply is handled by most transceivers directly, for older trasmceivrs the optiona power supply M-100.PSU is available.

Exclusive features of the M-1 vs M-100: Equalizer, LC display, headphone connector, record/playback memory, mic gain control, monitor volume control.

M-100 base

  • Scope of delivery Yaesu M-1:
  • Mikrophone M-1
  • Treble Bass Cowling
  • Mikrophone cable
  • Power supply
  • Manual (englisch)
  • Scope of delivery Yaesu M-100:
  • Mikrophone M-100
  • Treble Bass Cowling
  • Mikrophone cable
  • Manual (englisch)

"WRTC 2018 Special" Promotion

As the prime sponsor for the WRTC 2018 Yaesu offers a new cashback promotion especially for this event! Buy your new Yaesu radio now and get cash back directly from Yaesu UK.

  • FT-DX5000 300,00 € cash back
  • FT-DX3000 100,00 € cash back
  • FT-DX1200 100,00 € cash back
  • FT-991A 100,00 € cash back
  • FT-891A 80,00 € cash back
  • M-1 Mikrofon 100,00 € cash back
  • M-100 Mikrofon 50,00 € cash back

This promotion is handled directly by Yaesu UK and not by WiMo. To use this promotion you have to fill out the claim fiorm below and send it directly to Yaesu UK. This promotion is only valid for the products mentioned which have been bought during the validity period mentioned.

For further instructions please download this claim form:

This promotion was extended and is valid from February 15 until June 15, 2018.
Order No.
M-1 Yaesu Desktop Microphone M-1 649.00 € Add to shopping cart In stock, shipped in 1 or two days.
M-100 Yaesu Desktop Microphone M-100 369.00 € Add to shopping cart In stock, shipped in 1 or two days.
M-100.PSU Power Supply for Yaesu M-100 59.50 € Add to shopping cart In stock, shipped in 1 or two days.
Info freight charges
Technical Data Yaesu M-1, M-100
M-1 M-100
Elements Dynamic, Condenser
Voltage 5V ± 5%
Frequency response 30 – 17000 Hz
Sensitivity -60 dB
Impedance 600 Ω
Impedance Headphone 16 Ω -
Output level Headphone 15 mW -
Dimensions 140 x 280 x 152 mm 126 x 280 x 137 mm
Weight 960 g 910 g

Compatible transceivers for M-1 and M-100:
FT-DX9000, FT-DX5000, FT-DX3000, FT-DX1200, FT-891, FT-450D, FT-991/991A, FT-817D, FT-857D, F-897D, FT-2000D, FT-950, FT-920, FT-900, FT-847, FT-1000MP, FT-1000MP MkV

Compatible transceivers for M-1 and M-100 (M-100 requires optional M-100.PSU):
FT-1000, FT-990, FT-840, FT-747