
Remote controlled antenna switches (coaxial)
Content of this page
ACOM-2000 SW Remote 10-way Antenna Switch

ACOM-2000SW
Very solid 10 to 1 antenna switch for outdoor use. Useable up to 60MHz, up to 5000 W (at good SWR). Hot switching protection, 4 Bit BCD selector signal, feedback signal. Protection qequiv. IP53, wide temperature range, voltage supply 24 to 31VDC. Unused antenna inputs are gounded.
Including control unit ACOM-2000S. requires a 7 wire, shielded control cable. Up to a length of approx. 35m our reference 40012.12 is sufficient. Longer distances require a larger cable gauge. Required connectors are included. The control unit is powered with 230V AC, no further power supply is required.

ACOM-2000SW
ACOM-2000SW | |||
---|---|---|---|
Frequency Range | 0.1 bis 60 MHz | ||
Connections | PL (SO239A, PTFE, 50Ω) | ||
Switching Time | < 0.15 Sek. | ||
Power Supply | 24 … 31 VDC, 150mA | ||
Size | 160 mm Ø, 105 mm H | ||
Weight | 1.9 kg | ||
Temperature range (operating) | -30 … +60° C | ||
Max. Power | f ≤ 30MHz | @ VSWR1:1 | 5000 W |
@ VSWR2:1 | 2500 W | ||
@ VSWR3:1 | 1600 W | ||
f ≤ 60MHz | @ VSWR1:1 | 3600 W | |
@ VSWR2:1 | 1800 W | ||
@ VSWR3:1 | 1200 W | ||
SWR | ≤ 2MHz | 1.02:1 | |
≤ 30MHz | 1.08:1 | ||
≤ 60MHz | 1.20:1 | ||
Crosstalk | ≤ 2MHz | ≤ -100dB | |
≤ 30MHz | ≤ -70dB | ||
≤ 60MHz | ≤ -66dB |
- Included in delivery:
- Switch 10:1 Acom-2000SW
- Control unit Acom-2000S
- Connectors for cable
- english operation manual
Order No. | |||||
---|---|---|---|---|---|
ACOM-2000SWS | 10:1 Switch incl. control unit | 795.00 € | Add to shopping cart | Not in stock, ordered only on customer request, delay at c. 60 days. ⓘ | |
40012.12 | Control cable 12 wires, 12 x 0.34mm², shielded, per meter | 1.90 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
Download: Operation Manual ACOM-2000SW (PDF, EN, 165KB)

