SOTABEAMS ContestConsole switching unit for ICOM radios Nuevo

ContestConsole

Gain full control of your ICOM radio with the SOTABEAMS ContestConsole. Easy to use - connects between your radio and microphone.

  • Features (depending on radio):
  • Instant access to voice, CW and PSK memories (no need to have them displayed on the radio screen)
  • TX PTT button
  • TX low power tune function - sends 10 Watt carrier (optional lead required)
  • Pushbutton frequency control (frequency up/down - or memory channel up/down)
  • External PTT socket for footswitch
  • Auxiliary microphone socket (3.5mm)

Will it work with my radio?

The ContestConsole was designed with the IC-7300 in mind but it works with a wide range of other ICOM radios.

IC-2300H, IC-2730, IC-275, IC-575, IC-7000, IC-703, IC-706, IC-707, IC-7100, IC-718, IC-7300, IC-7400, IC-746, IC-746PRO, IC-756, IC-756PRO, IC-756PROII, IC-756PROIII, IC-7600, IC-7610, IC-7700, IC-78, IC-7800, IC-7850, IC-7851, IC-9100, IC-910H, ID-4100A, ID-4100E

Functionality varies for each radio. See linked document in the download section for a full compatibility matrix.

Tips for use

  • There are usually some radio settings that need changing before the memory buttons will function - look for "external keypad" in the radio manual for details.
  • Do not connect two microphones at the same time. If connecting a microphone via the ContestConsole, use either the 3.5mm socket or the 8 pin socket, not both.
  • On some radios, an external storage device (memory card or USB stick) might be needed for voice memories to work.
External Link: ContestConsole Compatibility Matrix (PDF)
External Link: ContestConsole Instructions (PDF)
Articulo No.
SB-CC-ICOM ContestConsole for ICOM 85.50 € Añadir al carro de la compra Nuevo No disponible, lo tendremos el 28. nov. 2019
SB-CCTL-102 TUNE cable for ContestConsole 24.50 € Añadir al carro de la compra Nuevo No disponible, lo tendremos el 27. sep. 2019
Gastos de envió

Frequently Asked Questions

Q: Does the ContestConsole provide a complete DC connected "pass through" for the microphone socket on the radio (including the 8 Volt supply)?

A: Yes. The ContestConsole does provide a complete DC pass through including the 8 Volt supply.

Q: The "Tune" indicator on my IC-7610/7600 stays illuminated. Does this mean the internal tuner is activated?

A: The Click2Tune simulate a successful tuning sequence for an external AH4 tuner. There is also a switching sequence that is used by an external automatic tuner to indicate it failed to find a match. The Click2Tune appears to the transceiver to be a successful tune so sets the display as such. The 'TUNE' indicator simply indicates the transceiver's circuitry detected a successful external AH4 tune sequence. It does NOT indicate the internal tuner is in line.

Q: I already have a SOTABEAMS Click2Tune for ICOM. Can I use that with the Contest Console?

A: Yes, your existing Click2Tune lead will function as it did before. However, the Tune button on the ContestConsole will only function with the optional Tune lead.

Q: I use my ICOM with an automatic antenna tuner that has a lead that connects top the white Molex connector on the radio. Can I also use the optional Tune lead?

A: The ContestConsole will work fine with your existing antenna tuner - the operation of the tuner will be unchanged. However, the Tune button on the ContestConsole will only function with the optional Tune lead.

Q: What are the dimensions of the ContestConsole?

A: W110 x D75 x H40 mm