TNC angled connector m/f
In stock, shipped in 1 to 2 days
- TNC plug/TNC jack, 90°
For Wifi equipment (wireless LAN) often so called reverse polarity, or RP-TNC connectors are used. That means that the center conductor has an inversed polarity. Instead of a male conductor you find a female contact and vice versa. This leads to quite some confusion about what is a plug and what is a jack... Usually all connectors with an outside thread are called a jack, all with a nut with inner thread are plugs, regardless of the polarity of the center conductor. On our website Wifi connectors this is explained in greater detail and with pictures.
Most of the connectors offered here are crimp connectors. That means that these connectors are not soldered but that the outer shield is pressed onto the shaft of the connector with a special tool. The center conductor is usally soldered. Of course we supply the required tools as well, please see Crimp tools.
If you want to crimp the connectors yourself, you need the exact dimensions to which the outer sheath, the outer conductor and the dielectric must be cut. You can find these dimensions in the following file in the download area above: Kabel-Längenmaße für Crimpstecker (PDF, 173KB)
We also offer custom made coaxial cables, please see here.
|Connector A||TNC Plug|
|Connector B||TNC Socket|