LDG Z-817 Antenna Tuner 20W

€189.00
incl. VAT, plus shipping €158.82

In stock, shipped in 1 to 2 days

View accessories
SKU
Z-817

Supply Scope

  • LDG Z-817 Tuner
  • Control Cable for FT-817/818, length 1m
  • Manual DE, EN
The Z-817 is the ultimate autotuner for QRP radios including the Yaesu FT-817/FT-818. The Z-817 interfaces to the CAT port (ACC) on the back of the FT-817 radio with the provided cable. Tuning could not be simpler; one button push on the tuner is all that is needed and the Z-817 takes care of the rest. It will switch to PKT mode, transmit a carrier, tune the tuner, then restore the radio to the previous mode! 2000 memories cover 160 through 6 meters.


Of course, the Z-817 will also function as a general purpose antenna tuner with other QRP radios. Just transmit a carrier and press the tune button on the tuner. The Z-817 is powered by four AA internal Alkaline batteries (not included), so there are no additional cables required to use the Z-817. Latching relays are used so that power consumption is Zero when not tuning allowing a set of batteries to last about one year.


Technical Data LDG Z-817

  • RF Power 0.1 to 20 watts SSB, CW and digital modes

  • Latching relays for ultra low power consumption

  • Battery operated 4 x 1.5V Alkaline AA (not included)

  • Built-in CAT port interface. CAT thru port for computer connection.

  • 2000 memories when used with FT-817/FT-818 interface (200 memories for other radios)

  • 1.8 to 54 MHz coverage

  • Tunes 6 to 600 Ω (about 10:1 SWR range). 16 to 150Ω on 6m (about 3:1)

  • SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, ect.

  • Dimensions: 120 x 43 x 130 (WHD). Weight: approx. 300g (without batteries).


Included in shipment is one CAT cable for Yaesu FT-817/818.
Conn. A Conn. B Tuner Radio Function
LDG-Y-ACC 3.5 mm, Stereo 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-100, FT-857, FT-897, FT-891, FT-991/A Tune
LDG-Y-ACC2 10pin MiniDIN 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-450/D, FT-710, FT-950, FT-DX10, FT-DX1200 Tune
LDG-Y-ACC3 15pin SubD 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-DX101D/MP, FT-DX3000 Tune
LDG-Y-CAT 8-pin MiniDIN 8-pin MiniDIN Z-817, AT-897+, YT-100 FT-100, FT-857, FT-897 Tune + Power
LDG-I-ACC Icom Tuner 3.5mm + DC Z11-Pro2, Z-100Plus, AT-100Pro2,
AT-200Pro2, AT-600Pro2, AT-1000Pro2
all Icom w/ Tuner conn. Tune + Power
LDG-I7-ACC Icom Tuner 6-pin MiniDIN IT-100 all Icom w/ Tuner conn. Tune + Power
Technical Data
Product Name Z-817
Impedance Range (Ω) 6 - 600 Ohm
Min. Tune Power (W) 0.1 W
Supported Bands 160m, 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m, 6m
Supply Voltage [V] 6 V
Display LED
Remote Control capabilities Yes
Number of Memories 2000
Tuner type Automatic Tuning
Brand LDG
Weight 260 g
Max. Power [W] 20 W
Frequency Range 1.8 - 54 MHz
Size W x H x D 119 x 43 x 130 mm

Related categories