incl. VAT, plus shipping €133.61

In stock, shipped in 1 to 2 days


Supply Scope

  • Power supply cable (open end); 0.95 metre
  • RCA cable (open end); 1.45 metre
  • Quick start guide DE, EN
Problems with local QRM on short wave? Very often the answer to this question is a clear 'YES'. Those living in rural areas know how 'clean' the frequencies can be - except maybe the near-by high-power land line makes noise...

However, most interferences are caused by local electronic sources, like TV's, computer, bad connections.

With this new accessory you can get rid of local interference up to an S9 level almost entirely; the result is a clean QRG! You don't have to know what kind of a interference is present neither would you have to have knowledge about the location of the interference. It doesn't matter if the interference originates from the own Packet station of from a welder 100 meters away.

The QRM Eliminator is inserted into the feedline from the trx to the antenna without any additional modifications required to the radio. The box has a built-in PTT control which enables the Eliminator to stay connected during transmit. An additional auxiliary receiving antenna is required, though, like a 2m antenna or simply a couple of meters wire in the shack.

The unwanted signal is received with both antennas resulting in different phases. The QRM Eliminator now allows to adjust the phase angle as well as amplification in a way to cancel out the unwanted signal before it reaches the receiver front end!

It's based on a totally innovative concept and cannot be compared to the normal 'noise blanker' performance.

Additional data:

Dimensions: 200x130x56mm

Terminals: 3xUHF connectors for TX, base station and auxiliary antennas, 1 x Cinch jack for PTT and 1x jack socket for power supply

Power supply: 12V/150mA.

Video - Demo QRM Eliminator

By DK6MP, many thanks!

Technical Data
Brand WiMo
Weight 268 g

Related categories