Acom 2020S solid state PA (1500W, 160m-6m), with remote control
In stock, shipped in 1 to 2 days
- Remote control with touch display
- Remote controllable via internet
- Automatic band change
- Acom 2020S
- Remote control unit
- Power cable
- Connection cable for remote control
- Instruction manual
Technical description ACOM-2020S
The ACOM-2100 is a transistor PA for a maximum transmit power of 1500 W on shortwave and 6m. It is compatible with all transceiver models and features a wideband input circuit that provides perfect transceiver load with SWR below 1.2 (typical 1.1) without retuning over the entire frequency range from 1.8 to 54 MHz.
The two PA power amplifiers use a robust LDMOS transistor - MRFX1K80HR5 or equivalent. Thanks to input and output ports isolation from each other, the intermodulation is reduced, and SWR toughness, self-excitation resistance, and reliability are improved.
Remote control via the Internet is enabled by the integrated web interface, Ethernet RJ45 port and Wi-Fi adapter.
During operation continuously working protection circuits in all operating modes protect the Acom 2020S fully automatically. The operator can monitor 11 parameters of the amplifier during operation. Detailed data (55 parameters) is stored in the amplifier's memory on each of the last 28 trips of the residual current protection.
The built-in switching power supply operates on a supply voltage of 200 - 240 volts, ±10% (180-264 V limits), without internal switching. The current drawn is pure sinusoidal, power factor corrected (PFC) and inrush current limited. This makes operation of unstable mains and generators simple and trouble-free.
- Power amplifier: 428 x 425 x 190 mm (width x depth x height), 21.9 kg
- Remote control: 204 x 144 x 92 mm (width x depth x height), 0.9 kg
- Temperature range: -10...+40 °C
- Humidity: up to 95% @+35°C, non-condensing
- Altitude: up to 3050m a.s.l.
Application description ACOM-2020S
The Acom 2020S power amplifier has been optimized for easy operation. The menus and functions can be operated easily and intuitively via the large, high-resolution touch display (155x90mm, 1024x600 pixels) of the remote control (Model R05).
If the power amplifier is connected to the CAT interface of your transceiver, an automatic monitoring of the operating frequency and, if necessary, an automatic band change takes place. But even without a CAT cable, the device is able to determine the operating frequency and perform a band change if necessary, thanks to the built-in frequency counter.
Naturally, the electromagnetic compatibility complies with CE requirements and FCC regulations. Perfect compatibility - both with highly sensitive devices and with other devices in the shack (receivers, computers, other amplifiers) - is given thanks to the used PFC and built-in high frequency filters.
|Amplification (dB)||14 dB ±1 dB|
|Supported Bands||160m, 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m, 6m|
|Remote Control capabilities||Yes|
|Temperature Range||-10 - +40°C|
|Weight (Transport) [kg]||29|
|Max. Power [W]||1500 W|