Anytone's new BT-01 remote speaker microphone allows you to remotely control all functions of your D578UV mobile device. Thus it meets the problematic installation and space situation in modern motor vehicles. The actual radio can be mounted anywhere in the vehicle, e.g. in the trunk.
With a 2.2" screen diagonal, the LC color display of the BT-01 is even larger than the 1.7" display of the D578UV! Additional visual feedback is provided to the user by two multi-color LEDs (blue/green/red) on the front panel. The built-in speaker with 1000 mW LF output power is easy to understand even in loud environments.
Operation is possible both wirelessly via Bluetooth, version 4.2, and wired, the matching cable with a length of 4 m is included. The integrated battery can be charged with 3.7 V / 1800 mAh via the side USB port, for example, directly to an existing USB port in the vehicle. If the BT-01 is used wired, the battery is charged automatically.
Configurability by the user has also been thought of: below the PTT button, 3 programmable buttons are available, which can be assigned to frequently used functions. The holding time of these keys can be set in three stages, so a total of 9 functions can be assigned. The "programming" can be done via the Bluetooth menu in the software of the mobile device, as well as directly on the microphone.
The operating concept is very much based on the familiar Anytone concept, zones and channels can be switched through via up/down keys, direct frequency entries can be made via the illuminated numeric keypad.
The following devices of the Anytone D578UV model series are suitable for operation with the BT-01:
- AT-D578UV PRO
- AT-D578UV III PRO
- AT-D578UV PLUS
- AT-D578UV III PLUS