LDG AT-100Pro II Antenna Tuner 125 W
LDG AT-100Pro II Antenna Tuner 125 W
€357.00
incl. VAT, plus shipping
€300.00
In stock, shipped in 1 to 2 days
View accessories
SKU
AT-100PRO2
Supply Scope
- Tuner LDG AT-100PRO2
- Power cable with hollow plug 5.5x2.5mm
The LDG AT-100Pro II and AT-200pro II are desktop tuners which cover all frequencies from 1.8 – 54 MHz, and will automatically match your antenna in no time. It features a two-position antenna switch, allowing you to switch instantly between two antennas. The AT-100Pro II requires just 1 watt to operation (5W for AT-200pro2), but will handle up to 125 watts, making it suitable for everything from QRP up to a typical 100 watt transceiver. The AT-200pro II handles up to 200W on HF, max. 100W on 6m, minimum tuning power for the AT-200pro II is 5W.
Each tuner includes over 2,000 memories for each antenna, automatically storing tuning configurations for each frequency and band as you use them. Frequency sensing circuitry lets the AT-100Pro II/AT-200pro II “know” your operating band and frequency. Whenever you transmit on or near a frequency you’ve used before, the tuner can retune from memory almost instantly: Tuning time is 0.2 sec for memory tune, 0.5 to 6 seconds for full tune.
Rugged and easy-to-read LED bargraphs show power and SWR, and a Function key on the front panel allows you to access data like mode and status.
The tuners will match dipoles, verticals, inverted-Vs or virtually any coax-fed antenna. With an optional balun, you can also use longwires or antennas fed with ladder-line. Tunes 6 to 1000 Ω loads (16 to150 on 6m), 6 to 4000 Ω with optional 4.1-balun.
Control from the front panel is simple and straightforward; just press Tune while transmitting a carrier, and the tuner will begin an automatic tuning cycle. For even more comfortable operation control cables for Icom and Yaesu transceivers is offered as an option. With the cable, a single button-press transmits a carrier, executes a tuning cycle and returns the radio to its original power and mode.
Power requirements: 11 to 16 volts DC at 500 mA max., dimensions: AT-100proII 19 x 14 x 5 cm. AT-200proII: 22 x 15,5 x 5cm, Weight: 0,8 Kg. A DC power cable is included.
| Conn. A | Conn. B | Tuner | Radio | Function | |
|---|---|---|---|---|---|
| LDG-Y-ACC | 3.5 mm, Stereo | 3.5 mm, Stereo | Z-11Pro2, Z-100+, AT-100pro2, AT-200pro2, AT-600pro2, AT-1000pro2 |
FT-100, FT-710, FT-857, FT-897, FT-891, FT-991/A | Tune |
| LDG-Y-ACC2 | 10pin MiniDIN | 3.5 mm, Stereo | Z-11Pro2, Z-100+, AT-100pro2, AT-200pro2, AT-600pro2, AT-1000pro2 |
FT-450/D, FT-950, FT-DX10, FT-DX1200 | Tune |
| LDG-Y-ACC3 | 15pin SubD | 3.5 mm, Stereo | Z-11Pro2, Z-100+, AT-100pro2, AT-200pro2, AT-600pro2, AT-1000pro2 |
FT-DX101D/MP, FT-DX3000 | Tune |
| LDG-Y-CAT | 8-pin MiniDIN | 8-pin MiniDIN | Z-817, AT-897+, YT-100 | FT-100, FT-857, FT-897 | Tune + Power |
| LDG-I-ACC | Icom Tuner | 3.5mm + DC | Z11-Pro2, Z-100Plus, AT-100Pro2, AT-200Pro2, AT-600Pro2, AT-1000Pro2 |
all Icom w/ Tuner conn. | Tune + Power |
| LDG-I7-ACC | Icom Tuner | 6-pin MiniDIN | IT-100 | all Icom w/ Tuner conn. | Tune + Power |
| Product Name | AT-100PROII |
|---|---|
| Impedance Range (Ω) | 6 - 1000 Ohm |
| Min. Tune Power (W) | 1 |
| Supported Bands | 160m, 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m, 6m |
| Current Intake (A) | max 0.5 A |
| Supply Voltage [V] | 11 - 16 V |
| Display | 2x LED Bargraph (Power, SWR) |
| Number of Memories | 2x 2000 |
| Tuner type | Automatic Tuning |
| Brand | LDG |
| Weight | 700 g |
| Max. Power [W] | 125 W |
| Frequency Range | 1.8 - 54 MHz |
| Size W x H x D | 140 x 51 x 190 mm |
LDG AT-100Pro II Antenna Tuner 125 W
€357.00
incl. VAT, plus shipping
€300.00
In stock, shipped in 1 to 2 days
