Anytone AT-D878UV II Plus (V2, BT, 3100 mAh)

New Version II - AT-D878UVII PLUS

New functions in version II
* Analogue APRS reception!
* Larger memory (2GB, up to 500'000 contacts)
* minor changes in various menu functions
and much more.

Please note that you also need a new CPS software to program version 2 of the AT-D878UVII Plus! The earlier version does not work with the new hardware version.

Here is the link to download the CPS version for the AT-D878UVII Plus (anytone.de).

With the release of firmware version 3.04, the radio has been significantly enhanced to include the “Satellite” mode: Based on the current GPS location, the AT-D878UV determines current and future passes of amateur radio satellites (including ISS) in low earth orbits (LEO's). In addition to displaying important satellite data such as azimuth, elevation, flyover duration and a graphical representation, the display of the RX and TX frequencies is also updated in real time. This also happens automatically and without further user interaction when transmitting! Particularly pleasing: the new function is very easy and intuitive to use. Before using for the first time, the orbital data must be sent to the device using programming software. This only takes a few clicks; operator errors are excluded.

The Anytone AT-D878UVII Plus is a handheld portable radio for DMR digital radio (compatible with MOTOTRBO Tier 1 and 2), traditional FM is also supported. In contrast to many other DMR devices, the D878UV offers true VFO operation. Here, a radio operator can set a frequency and transmit parameters as usual, instead of accessing pre-programmed memory channels only. This makes this radio much more suitable for amateur radio than other DMR handhelds. Of course, the Anytone D878UV also comes with memory channels, 4000 to be precise. But you don't just need to depend on pre-programmed channels. A further difference to other DMR devices is the possibility to change most (not all) parameters on the device. So you don't have to rely on computer programming for every small change. However, the settings for really all parameters (e. g. the DMR ID) are only possible with a corresponding (free) PC software.

• 1.77 Zoll Colour LC Screen
• 10-keyboard, 5 freely programmable function keys
• Dualband 2m/70cm (V/U, V/V, U/U)
• Channel width selectable 12.5/25 kHz (analog) or fixed 12.5 kHz (DMR)
• Digital: DMR (Tier I/II) and analogue FM
• WFM Receiver 87.5 - 108 MHz
• Up to 5 DMR IDs configurable
• 4000 Memories, 10000 Talkgroups, 500000 User List entries
• 250 Zones (memory banks) useable
• Display of ID (Call sign) of opposite station
• Two timeslots settable, all Colour codes settable
• Output power 1, 2.5, 5, 6 (UHF) / 7 (VHF) Watt
• Automatic mode recognition Analog/Digital
• Tone burst 1750 Hz
• Tone squelch CTCSS, DCS
• Tone call: DTMF, 2 tone, 5 tone
• GPS receiver
• APRS (Rx & Tx) on FM or DMR
• APRS settings per menu
• Recording and re-transmission of received signals (DMR only)
• New Roaming (selection of a reachable repeater from a pre-defined list)
• VOX function
• Integrated Bluetooth
• Bluetooth PTT
• Y-charge cable for Bluetooth PTT
• Weather protected IP54
• Kenwood / Wouxun compatible accessories
• Desktop charger with 12V supply, can be easily used at your station or in the car