Review: Maximum DX Performance for the 50 MHz Band: The InnovAntennas 7-Element LFA Yagi

DX-Power for the 50 MHz band

The InnovAntennas 7-element LFA Yagi antenna for the 50 MHz band is designed for radio amateurs who want to achieve maximum performance on the 6-meter band. This yagi features an 8.9-meter boom length and an impressive gain of 18.31 dBi, making it ideal for long-range DXing.

Maximum signal purity

The unique LFA (Loop-Fed Array) design reduces interference and increases the efficiency of the antenna. The shape of the loop optimizes the directivity, enabling a highly focused beam angle that blocks out unwanted background noise. The model delivers an impressively high front-to-back ratio, minimizing interference from the rear as well.

Ready for any weather

Made of durable, corrosion-resistant aluminum, the antenna is robust against external influences. The precise workmanship ensures that it remains stable and maintains its performance even under difficult conditions. All connections and mounts are designed to withstand extreme weather conditions while also allowing for easy installation.

The antenna for interference-free DX connections

The antenna is ideal for radio enthusiasts and professional users who prefer clear and interference-free transmissions. Its high performance and narrow beam width are particularly suitable for locations with high RF exposure or for areas that require long range and precision. The 7-element design is particularly suitable for the DX area on the 6-meter band.

Hideshi Tanaka, JJ1HMR: “My new antenna exceeds expectations!”

Hi Justin,
Just wanted to let you know that my antenna was installed last Friday and is working very well. I'm excited to send you the picture of my setup because your antenna is really beautiful!
My tower is occupied by HF (SteppIR UrbanBeam) and 70cm Yagi antennas. While I'm working on the 6m band, the UrbanBeam is set to the starting position. So I hope that the interference from this antenna is low. The VSWR is much better than my tests on the ground.

My previous antenna is the same 7-element Yagi, but the length of the boom was only 7.2 m. I think this is a very standardized (or classic?) design. I can't make a direct comparison, but I have the impression that the noise from the neighbor's solar panel is lower and that the new antenna has a greater range through ground waves. Due to the season, TEP mode propagation has already begun on the 6m band. In the last few days, I was able to work many VK and YB stations.

Thank you very much for this great antenna and your support.
Kind regards,

Hideshi Tanaka, JJ1HMR

Hideshi Tanaka: the person behind the call sign JJ1HMR

Hideshi Tanaka, JJ1HMR, was originally licensed as JH2KMK in 1971. His current station is located in Toride City, Ibaraki in Japan. However, it is mostly operated remotely from Utsunomiya City, Tochigi. At this QTH, Hideshi Tanaka operates equipment such as the ICOM IC-7610, IC-7700 and IC-9703. Some linear amplifiers, including a self-built MRF300A/B with 500W transmission power, are also used here.

The antenna farm consists mainly of a 16 mH dipole or a 2-element Yagi for HF (SteppIR Urbanem), a 17 mH 7-element LFA Yagi for the 6m band and a 19 mH 20 elements x 2 for the 70cm band.

Hideshi Tanaka is a Japanese class 1 licensee and a member of JARL (Japan Amateur Radio League) and ARRL (American Radio Relay Leag

The 7-element LFA Yagi for demanding radio amateurs

Overall, the InnovAntennas 7-element LFA Yagi offers the perfect combination of maximum efficiency, extremely low noise and durable construction – ideal for ambitious radio amateurs who want to get the most out of their 50 MHz bandwidth.

InnovAntennas 6m Monoband LFA Yagis