Diamond X-50N/X-50NA Omni 2m/70cm
In stock, shipped in 1 to 2 days
WIMO Expert opinion
Extremely popular omnidirectional antenna for the FM range
* Robust construction, solid materials, long durability
* No adjustment necessary, wide range
* Easy installation, everything included
* Large selection of models
Almost
every radio amateur has such an "X" on the roof - the Diamond
omnidirectional VHF/UIHF antenna. Perfect for the local club call
channel, the next repeater or the APRS station. They are available for
2m and 70cm, some models also for 23cm and 6m.
The Diamond
antennas have a robust construction and will last for many years without
any problems. The base is made of anodised cast aluminium, the outer
tube of UV-resistant plastic (FRP, Fibre Reinforced Plastic). The
internal, protected radiator is made of thick brass or copper-bronze.
This makes the antennas durable even in rough conditions, they can be
used up to wind speeds of 144km/h or more. The mounting is done by a
mounting pipe, which protects the coaxial socket against external
influences. The mounting pipe is attached to a mast with two supplied
clamps and U-bolts. Radials (if used), screws and brackets are made of
stainless steel, mounting pipe and clamps are made of aluminium.
The
antennas are electrically grounded, thus avoiding static electricity
and noise in the receiver. The Diamond SE, X and VX series use multiple
stacked radiators for higher gain. The radiation pattern becomes flatter
as the gain increases. The longer antennas are divided into two or
three parts for transport. This keeps the transport costs within
reasonable limits. These antennas must be assembled before the first
use. The joints are well sealed with an O-ring to avoid water ingress.
Some models are available with either PL or N socket. The models X-50NA
and X-200A are actually intended for the North American market. These
antennas cover the larger 70cm frequency range used in that region
(435-450 MHz). This makes them very suitable for PMR446 in Europe. The
regular versions of the X-50N/X-200 use the lower frequency range
(430-440 MHz) and do not have an optimal matching anymore at 446 MHz.
Some models (VX-, SE-) are constructed without radials and are therefore
very suitable for confined spaces or for installation on board a
sailboat. As the German Diamond general agency, we only supply the
original antennas in the well-known top quality. As befits a reliable
manufacturer, Diamond supplies the right spare parts even after many
years, should a radial be lost.
Product Name | Diamond X-50N/X-50NA Omni 2m/70cm |
---|---|
Antenna Type | Omni-directional Antenna |
Design of antenna | VHF/UHF Omni |
Mono-/Multiband | Dual band |
Color | White |
Polarisation | Vertical |
Brand | Diamond |
Gain 144 MHz [dBi] | 4.5 |
Gain 432 MHz [dBi] | 7.2 |
Max. Power [W] | 200 W |
Connector | N Socket |
Weight (Transport) [kg] | 1.1 |
Length [m] | 1.7 m |
Supported Bands | 2m, 70cm |
Max. Mast Diameter [mm] | 30 - 62 mm |
Impedance [Ohm] | 50 |