Icom IC-7100

incl. VAT, plus shipping €1,214.29

In stock, shipped in 1 to 2 days

View accessories

Top Features

  • 48.6 x 75.9 mm touch display
  • Advanced DSP technology for RX, TX, AGC, filter, CW, noise reduction
  • Tx: 160 m to 10 m, + 6 m, 4 m, 2 m, 70 cm
  • Rx: 30 kHz to 200 MHz and 430 to 470 MHz continuously
  • Operating modes: SSB, AM, FM, WFM (Rx), CW, RTTY, D-Star
  • SWR meter integrated
  • Display with microphone connection and loudspeaker remotely

Supply Scope

  • Handheld microphone HM-198
  • Detachment cable OPC-2253
  • Power supply cable; 13-pin ACC connector
  • Morse code plug
  • USB cable; Replacement fuses; Control panel
  • Main unit

WIMO Expert opinion

With the remote control panel, you can position the BlackBox flexibly while keeping all controls within easy reach - ideal for mobile use in the vehicle. Thanks to the touch display, you have quick access to functions and frequency input so that you can also operate conveniently on the move. Integrated D-Star and an internal repeater list enable digital operation without additional devices - simple and uncomplicated. The IC-7100 enables operation on shortwave from 160-10m, 6m, 4m, 2m and 70cm and offers outstanding reception quality thanks to the 32-bit DSP - for clear signals in any situation.
The monochrome display could be perceived as less appealing compared to color displays - however, the readability is top thanks to the high contrast and advantageous in mobile operation. If you want to operate a non-resonant antenna, you will need to use an external tuner.
Christoph Bothe Christoph Bothe DL4EX WiMo Head of Technical Support

Technical description IC-7100

The IC-7100 has it all: shortwave, 2m and 70cm, all operating modes - even D-Star! The remote control unit is ideal for installing the 100W transceiver in the car, while the bright and clear LC touch display makes operation much easier.

Modern digital technology ensures particularly good reception: A 32-bit DSP (Digital Signal Processor) provides functions such as Twin Passband Tuning, Noise Reduction (noise blanking and noise suppression), CW Autotune, Autonotch, numerous filter modes with different bandwidths and filter curves without expensive, separately procured crystal filters and much more throughout the entire reception range from 30 kHz to 199.999 MHz and from 400 to 470 MHz in all modulation modes. The AGC also operates digitally during reception and transmission, making it particularly accurate and flexible.
The transmitter has an integrated SWR meter and provides an output power of 100 W on all shortwave bands from 160 to 10 m and additionally 6 m. On 4 and 2 m the IC-7100 still offers an output power of 50 W and on 70 cm 35 W. The DSP also provides a very clean output signal, changeable filters and a high quality speech processor/compressor. Two antennas can be connected for the KW and VHF/UHF bands.
With a width of 16.5 cm, a height of 6.4 cm and a depth of only 7.85 cm as well as 500 g, the control unit of the IC-7100 is handy and yet not too small, but also the main unit is compact with 16.7 cm x 5.8 cm x 22.5 cm and 2.3 kg and finds a place everywhere. The power supply of 13.8 V / 22 A is possible with a power supply unit, but also mobile or on a fieldday or expedition.

Application description IC-7100

The beveled 48.6 x 75.9 mm touch display immediately catches the eye on the IC-7100. The most important functions can be called up quickly and easily by directly touching the individual menu items on the display. Frequency input is also possible directly via the display with a superimposed keypad.
The control unit can be placed on the station table to save space without the need for an additional tilt bracket, while the transmitter and receiver can be stored elsewhere. Even in the car, only the display needs to be mounted in the passenger compartment. All the necessary buttons and controls are also on the control panel. The microphone is connected on the back of the control unit, also the powerful loudspeaker is located there.
In the IC-7100 all components for D-Star operation are already built in. The unit has an internal repeater list, which can be accessed quickly and easily through the touch display. With an external GPS receiver, the IC-7100 can also automatically select the nearest relay from this list. It almost doesn't get any easier or more convenient than this.
For digital operating modes, the IC-7100 is the ideal companion thanks to its wide range of connection options. In addition to the classic CI-V interface, there is, among other things, a USB interface for connection to the computer and, of course, connections for a Morse key and a linear output stage. Furthermore, the optional RS-BA 1 remote control software allows the transceiver to be operated remotely via the Internet. So that all settings are always available, the IC-7100 offers the possibility to save the settings on a SD card, as well as QSOs. Logfiles or CQ calls as well as automatic replies in DV mode.
Technical Data
Product Name IC-7100
Supported Bands 160m, 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m, 6m, 4m, 2m, 70cm
TX Power [W] 2-100 W (HF+6m), 2-50 W (4m) , 2-50 W (2m), 2-35 W (70cm)
4 m Band TX capable Yes, as shipped
6 m Band TX capable Yes, as shipped
60 m Band TX capable Yes, as shipped
Brand Icom
Modes USB, LSB, CW, AM, FM, RTTY, WFM (Rx), D-Star (GMSK)
Weight 2.3 kg
Antenna Connector PL socket (2)
Bluetooth Interface No
Founded in 1954, the Japanese company Icom is one of the best-known brands in both the professional and amateur radio sectors. Icom supplies analog and digital radio systems for marine, aeronautical, professional and amateur radio as well as satellite radio. With the IC-7100 Icom presents a powerful wideband transceiver for HF, VHF and UHF with remote control unit for stationary and mobile use.
Icom IC-7100
Icom IC-7100

Fast Delivery Free consulting Secure payment

incl. VAT, plus shipping €1,214.29

In stock, shipped in 1 to 2 days

Related categories