No longer available
- ID-51E radio; SMA clip-on antenna
- Belt clip MB-127
- Wrist strap
- LiIon battery BP-271
- Plug-in loader
- Printed 'Basic' manual, EN
- Printed quick start guide, multilingual
- CD-ROM with full manual EN
- CS-51plus2 memory management software (on the CD-ROM)
USB A / Mini-B cable
- Data cable OPC-2350LU
The Icom ID-51E is a compact handheld radio for 2m and 70cm operating in FM and D-Star with an additional AM/FM wide band Broadcast * receiver. A lot of emphasis was placed on easy use. The display has been increased by 1cm. That way the product has been exposed to be a little larger, but is still perfectly in your hand. The LC Display is easy to read and the simple menu with additional graphical icons shows all information immediately. Of course, the ID-51E is again waterproof to IPX7.
The ID-51E has a GPS antenna directly built in. This offers the D-PRS positional informations to the network, letting you see the distance and direction to other stations as well. Further the radio can act as a GPS logger as well, for example to record the track of a mountain hike. If the repeater lists are up to date the ID-51E automatically shows the closest D-Star repeaters.
The Icom ID-51E is equipped with a slot for a Micro SD card  up to 32GB. In this extra memory, not only all settings and relay lists are saved, but also the data of the integrated GPS logger. The archived data can be read out later to the computer again and are processed appropriately. Similarly, you can save D-Star QSO on your memory card and play them back later.
1304 memory locations, which can be organized in different submited banks make the Icom ID-51E ready for almost all applications. It is also possible to store the cut-off frequencies for the scanner and repeater offsets separately. This allows to arrange the memories for example depending on the location. Icom offers a free software for memory management CS-51 (included in delivery). This software is used directly with the Micro-SD memory card or with an optional programming cable.
Completely new is the integrated, independent AM/FM wide band Broadcast receiver. The frequency range for this is from 520 to 1710 kHz (AM) and 88 to 108 MHz (WFM). While you listen relaxed to the radio, you will hear with the dual watch to the local repeater. Once there is activity, the radio reception is muted. It is possible too to listen to two frequencies in one amateur band at the same time. The Dual Watch covers the combinations V/V, U/U and V/U. During the VFO is in digital mode, is the simultaneous monitoring of an analog signal not possible.
The transmitter of the ID-51E has up to 5 W output power, which can be reduced to 2.5, 0.5 or 0.1 W. Included in shipment is a LiIon rechargeable battery with 1150mAh capacity. A larger LiIon battery with 1880mAh and a battery box (3x AA) are available as an option. Other options include a quick/desktop charger, protective bag, various microphones and headsets and much more.
 A memory card is not included in the shipment. Unfortunately WiMo does not offer such cards either. But microSD cards are available at any local electronics or photo store at low prices. You can use cards of any size from 2GB to 32GB, type microSD or microSDHC. The speed requirements for the memory card are not specified.
Technical details of the ID-51E Plus
- Faster data transmission in DV mode
- Search function for DV- and FM Repeater
- Extended D-PRS Functions
- Android™-App RS-MS1A (requires optional cable OPC-2350LU)
- Additional Dplus Reflector Link commands
Wideband Receiver Ranges
- 520 — 1710 kHz (AM Broadcast)
- 76 — 108 MHz (WFM Broadcast)
- 144 — 146 MHz (NFM, D*)
- 430 — 440 MHz (NFM, D*)
The Icom ID-51E Plus2 also offers 2 new additional D-Star features:
In the Terminal Mode you can connect the ID-51E Plus2 with the supplied Data-Cable OPC-2350LU to a Personal Computer or via Bluetooth to a Android Smartphone. The Computer or the Smartphone sets a Connection over the Internet to a D-Star Repeater.
In the Access Point Mode the ID-51E Plus2 works like a Hotspot. The Radio listen to D-Star Signal at the tuned Frequency and foward them to a connected Personal Computer or Android Smartphone. With this Setup you can build up a D-Star Hotspot in areas without a Repeater nearby.
A public IP adress is required for the Internet connction. Both modes reuire the latest gateway server application to be installed.
|TX Power [W]