ID-RP-2C D-Star Repeater

€925.00
incl. VAT, plus shipping €777.31

No longer available

View accessories
Available alternatives
Icom ID-RP4010V D-Star Repeater In stock, shipped in 1 to 2 days To the product
€1,798.99
incl. VAT, plus shipping €1,511.76
SKU
ID-RP2C

Supply Scope

  • ID-RP2C controller in 19 "-1U housing
  • Power cable for 13.8V, 4m
  • RS-RP2C programming software
  • Manual (EN)
  • Support feet (4 pcs.)

To set up a D-Star Repeater a controller ID-RP2C and at least one HF part for user access is required. Icom offers HF parts for 2m ID-RP-2000V, 70cm ID-RP4000V and 23cm ID-RP-2V (Voice), ID-RP-2D (Data)). In addition there are 10GHz Interlink systems (ID-RP2L) for networking several D-Star Repeaters to a complete system. These 10GHz components are not approved for Europe and are not offered by WIMO.

To operate the D-Star Repeater with optional internet gateway a PC is required (not offered by WiMo).

For setting up the repeater a PC with Windows is required.


ID-RP-2C D-Star Repeater Controller

The controller is the heart of the repeater.It controls the conversion via the HF part(s). Up to four HF parts can be connected. Furthermore, the controller provides the interface to the optional gateway computer. The 13.8V power supply of the HF parts can be done centrally via this controller, corresponding connections are available.

In addition to the four data connections for the HF parts (RJ-45 sockets), the controller ID-RP2C has an Ethernet connection (RJ-45 socket) for configuration. A corresponding programming software (RS-RP2C) is supplied. The same Ethernet interface is later used for connection to the optional Internet gateway.


Important note on initial operation

Please note that WiMo cannot assist you with the installation, configuration and commissioning of the relay, especially the gateway. Through Icom Europe you will find the contact details of the relevant specialists.

Technical Data
Product Name ID-RP2C
Brand Icom
Weight 2.7 kg

Related categories