The 'wireless ethernet cable'
Three different models are available:
-Maxi-WTP-5000: up to 5 km reach, up to 300 MBit/s, ready to use, 349.00 € per side
-Mini WTP-5000: up to 800m reach, up to 150 MBit/s, ready to use, 212.50 € per side
-Nano WTP-5000: up to c. 200m reach, up to 150 MBit/s, ready to use, 199.00 € per sideIdeal product to connect remote buildings, branch offices without network connection to the internet. Or integrate outlying buildings quickly and secure into your local network. The maximum distance is up to 5km with a free line of sight.
The Maxi-WTP-5000 is a 2x 24 dBi directional antenna with built-in Ethernet bridge. The device is pre configured for transparent operations (default SSID and WPA encryption). For point-to-point operation no further configuration is necessary! Just mount it outside of the building, connect to your local computer or network and go.
The bridge acts like a 'wireless cable', works independently of IP adresses of your local network and carries nearly any relevant protocols. Just like the outlying computer were connected to you LAN with a cable. The maximum data rate is 300MBit/s. For maximum security the connection is encrypted via AES/CCMP, the authentication is done by WPA2.
The Maxi-WTP-5000 bridges could handle much more than simple bridge operation. The integrated board supports also the operation as a Wifi client unit, for example also for VLANs. The configuration is done by Telnet/ssh (recommended) or by a webbrowser or a supplied windows tool.
The WTP-bridges are installed in a solid weatherproof case. The allowed temperature range is from -30 to +70°C. A mast mount bracket is included in shipment. The case has a waterproof RJ-45 socket for connection of an ethernet cable (not included). Power supply is done over the ethernet cable (PoE) with the supplied adaptor and power supply (PoE not 802.11af compatible).
Attention - for bridge use you need one unit 'bridge' and one unit 'Client'.