MFJ-854 Current clamp, max. 3A

SKU
MFJ-854
€152.30
incl. 19% VAT plus shipping
Not in stock, back in 50 days.
Inserted directly into the antenna feedline, measures antenna current in three calibrated ranges.

Use the RF current meters for precise measurements of antenna currents, while tuning your amplifier or tuner, calculate the impedance of your antenna feedpoint. Highly suitable for experiments with antennas or monitor changes of the antenna during operation.

Tuning for maximum antenna current usually results in highest radiated power (power rises to the square of the current). The minimum SWR is not necessarily the point where the highest antenna current is found. Or compare the efficiency of various tuners, the MFJ HF current meters identify losses quite easily.

The MFJ HF current meters are solid constructed devices for shortwave. Frequency range 1 to 30MHz, calibrated ranges for max. 0,3, 1 or 3A. 3A correspnd to 450W on a 50Ω antenna. The MFJ-854 is a very sensitive HF current meter. The sense coil snaps over any wire, radiator or cable and measures the true current flow in that conductor. This allows to measure currents in parts of an antenna, in radial or ground networks or on coaxcales. Also detects induced current in other conductors, like any household appliance and helps in identifying interferences like TVI or BCI.

Five fixed ranges from 30mA to 3A or one variable range selectable. The variable range has a minimum sensitivity of 1mA, enough to sense smallest currents like those from the MFJ SWR meters MFJ-259B or MFJ-269.

-High accuracy due to electronical compensation, especially at low currents

-Wide application from 1mA to 3A in six selectable ranges

-Full coverage of HF from 1.8 to 30MHz

-Little influence on the tested conductor

-Sense coil snaps over max. 1.3cm conductors

-Low power consumption and power-save mode allow for extremely long battery life

-Weight: ca. 400g
More Information
Impedance (Ω) 52
Max. Power Handling 450W
Short Description HF Current meter
Title MFJ-854 Current clamp, max. 3A