Microkeyer 2R+ Multimode controller f. 2 TRX

€755.50
incl. VAT plus shipping €634.87

Unfortunately this product is not available anymore. Sorry.

SKU
MICRO-2RPLUS

Supply Scope

  • MK2R + ™
  • USB cable
  • LPT cable
  • Six audio cables (stereo)
  • Headphone cable with two connectors 6.3mm
  • Two 3.5 mm plugs
  • A DC barrel connector
  • Two cinch cables
  • CD-ROM with microHAM USB Device Router software and documentation

And once again - all in one controller, but now for two radios! The ideal device for all demanding radio amateurs who have more than one radio on their desk. And also highly suited for Single-Op/2 Radio (SO2R) operations in a contest.


MK2R+™ is a most powerful All-In-One multi-mode two radios USB controller for CW, SSB, AM, FM, and digital modes (RTTY, PSK31, SSTV and many others) designed for the serious contest operator or DXer with two transceivers. microKEYER 2R includes rig control interfaces for two supported radios (Elecraft, Icom, JRC, Kenwood, Ten-Tec, and Yaesu), independent PTT outputs for both LNA and Power Amplifier control, an improved, second generation WinKey CW Keyer, receive and transmit audio switching. microKEYER 2R Plus also includes a unique, dual codec sound system for audio processing.


Package contains: MK2R™ or MK2R+™, USB cable, LPT cable, two (2) stereo audio cables, headphone cable ending with two (2) 6.3mm (1/4”) plugs, two (2) 3.5mm (1/8”) plugs, one (1) coaxial 2.1mm/5.5mm power plug, two (2) RCA to RCA cables, and CD-ROM containing the microHAM USB Device Router program and documentation.


General Features:

  • single USB connection (advanced mode) with LPT port for compatibility with "classic standard"
  • stand alone operation without computer
  • support for independent settings for dissimilar radios
  • optimized operation on each radio and dissimilar modes (R1=SSB, R2=CW)
  • innovative dual sound card processing
  • integrated dual USB sound core (MK2R+ only)
  • 16 buttons/42 lights for ergonomic function control and status display
  • compatible with most standard MS Windows based logging or control programs
  • Drivers for all Windows versions incl. Windows Vista®, Windows7 and later (since Vers. 7.6.1.).
  • DOS mode compatibility with LPT port interface of DOS based contest loggers (CT, TR, NA)


Radio control:

  • integrated level converter for both radios CI-V, FIF-232, IF-232, or RS-232
  • up to 57600 Baud with handshake support
  • fully supports most Icom, Kenwood, Ten-Tec, Yaesu and other radios
  • optical isolation of radio control port from computer


Keying:

  • optical isolation of all keying signals from computer
  • intelligent keying lockouts for both radios (Band lock, Busy lock, External lock)
  • hardware support for "last one wins" or "first one wins" operation
  • easy switching between manual and automatic control
  • independent settings for dissimilar Power Amplifiers
  • Hot Switch PA protection with user defined timing
  • programmable PTT assertion delay in 1ms steps
  • T/R sequencer with extended capabilities
  • separately sequenced keying outputs for VHF LNA preamplifiers
  • supports dual (one per radio) or single footswitch operation
  • supports separate PTT for each radio with automatic TX focus control
  • supports VOX and CAT T/R switching
  • wide range solid state outputs for modern PA keying or QSK PA separately for each radio
  • relay isolated outputs for negative or high voltage PA control for each PA


CW:

  • integrated second generation K1EL WinKey2
  • front panel speed knob
  • selectable side tone capabilities with "paddle side tone" function
  • nine (9) user programmable memories
  • logger independent contest auto-numbering
  • supports PS/2 keyboard for CW transmission with type ahead
  • supports PS/2 keyboard or keypad for CW "memory keyer" and control
  • PS/2 keyboard or keypad CW works without computer connection
  • handles multiple CW sources: WinKey2, serial port and/or LPT port with steering


Digital (FSK/AFSK):

  • six transformers for DC isolation of sound card and radios
  • selectable routing of radio outputs (VFO A/B) for each sound card channel
  • low noise preamplifiers for improved weak signal decoding
  • front panel controls to optimize levels for each sound card channel
  • front panel controls to optimize mic drive for each radio
  • integrated high performance, low noise floor USB sound core (MK2R+ only)
  • separate USB sound codec for digital modes (MK2R+ only)
  • separate AFSK drive for each radio
  • selectable sound card channel output/steering for AFSK
  • application specific mono/stereo signal source handling
  • dual FSK output
  • supports data codes with 5/6/7/8 data bits and 1/1.5/2 stop bits
  • unique, hot switch protected FSK keying
  • separate PTT output for AFSK keying supports microphone muting
  • nine (9) user programmable memories (FSK)
  • supports PS/2 keyboard FSK transmission with type ahead and diddle function
  • supports PS/2 keyboard or keypad for FSK message playback and control
  • PS/2 keyboard/keypad FSK works without computer connection


Voice (SSB/AM/FM):

  • front panel headset jacks
  • rear panel hand/desktop microphone jack
  • front panel selection of connected microphones
  • supports all microphone control functions for Radio1
  • selectable preamplifier supports dynamic microphones with computer interface
  • selectable preamplifier for using dynamic microphones with Icom radios
  • customizable microphone routing for each state (VOX / computer PTT / footswitch) by radio
  • customizable microphone routing for operation style (direct to radio / through sound card)
  • Digital Voice Keyer with nine messages up to 120 seconds line and unlimited "banks"


Headphone (Receive) Audio:

  • front panel headphones jacks, rear panel external speaker jack
  • unique "multi-source" signal handling
  • supports second sound card for audio review or "spot announcements"
  • able to switch any of six (6) audio sources to either ear
    1. R1 VFOA 2. R1 VFOB 3. R2 VFOA 4. R2 VFOB
    5. Sound Card left channel 6. Sound Card right channel
  • hardware support for independent receive audio selection by operating state
    1. R1=RX, R2=RX, TX focus=R1 2. R1=RX, R2=RX, TX focus=R2
    3. R1=TX, R2=RX 4. R1=RX, R2=TX 5. R1=TX, R2=TX
  • hardware support for user defined "scenarios" handling (weak pileup, strong pileup, S&P...)
  • front panel control of audio mix level
  • configurable audio source (VFO A/B) for each sound card channel
  • support for recording headphone audio (WYH - What You Hear)
  • user selectable "delayed" headphone switching (100ms steps)
  • independent front panel record level level control for each channel
  • additional buttons for "classic" audio control R1/SPLIT/R2 or R1/MIX/R2
  • easy switching between manual and automatic control


Other:

  • configurable Accessory connection with dual BCD band data outputs
  • user definable presets to recall all parameters for different control programs or contests
  • all parameters are stored inside the box memory and reloaded after power up
  • integrated chokes and filters for maximum RFI immunity
  • Metal/Aluminum case, powder coated and silk screened
  • Free, no time limit firmware/software upgrades via Internet


Notes:

  • MK2R and MK2R+ are hardware products - its level of functionality is determined by the features offered by the application software and transceivers with which it is used. MK2R and MK2R+ "fully supports" a radio when microHAM releases a cable set designed to interface MK2R to the specific input/output requirements of a supported transceiver. Due to differences in capabilities among transceivers, the support software (microHAM USB Device Router) and/or MK2R may not implement microphone muting, FSK and/or frequency decoding for all supported radios.
  • You will need at least one radio specific cable-set, or two cable sets if you plan to use two radios. For schematics of the cables please see below at the 'microKEYER', the cables are the same.
  • A computer with at least 800MHz processor clock is recommended for use with the micro-Keyer 2R/2R+.


Note: microHAM USB Device Router and microHAM Device Configurator are compatible with all 32bit and 64bit versions of Windows 7, Windows 8, Windows 10, Vista, XP, 2000 and 2003.

Technical Data
Product Name Micro-2R Plus
Brand microHAM

Related categories