PNI Echo One Microphone with Roger Beeb/Echo Module
In stock, shipped in 1 to 2 days
- With up/down buttons
- Adjustable echo effect
- MP3 or WAV audio file as roger beep
- Echo One handheld microphone
- Roger-Beep/Echo module installed
- Multilingual user manual
Inconspicuous on the outside, spectacular on the inside!
PNI's Echo One is merely a "normal" handheld CB microphone with up/down buttons on the outside. After opening the case, however, one immediately sees the installed Roger Beep/Echo module.
The echo can be adjusted to your personal taste using two small rotary controls. The audio file for the Roger Beep is imported via the micro USB socket. Any audio file in .mp or .wav format with a length of up to 1.5 seconds is suitable for this. There are no limits to your creativity. Playback occurs automatically at the end of each transmission as soon as the "PTT" button is released.
With the Echo One, you can give your broadcasts a very personal, unmistakable touch.
The 8-pin RJ11 plug is assigned as follows ex works:
Pin 1: GND
Pin 2: MIC
Pin 3: not assigned
Pin 4: +5V
Pin 5: PTT/Up/Down
Pin 6: not used
The Echo One is suitable for the PNI Escort HP 6500 as well as HP 7120.
The length of the spiral cable is about 80 - 100 cm.
Dimensions: 50 x 75 x 30 mm
|Product Name||Echo One|
|Supply Voltage [V]||5 V|
|Suitable for||PNI Escort HP 6500, PNI Escort HP 7120|
|Type of microphone (electr.)||Dynamic|