qro.cz Remotius 64 IP Controller

The Remotius 64 from qro.cz is a state-of-the-art IP controller specifically designed to interface directly with the K9AY++/4-Way and 7ANT controllers. This innovative device not only offers a wide range of functions, but also intuitive operation via a web-based user interface (UI), Beam Map control or other systems such as NodeRed and Stream Deck.

With four different output banks, the Remotius 64 enables flexible control of a wide range of devices. Banks 1 and 2 are directly compatible with our K9AY++/4-WAY and 7ANT RF controllers, while bank 3 can be used as a universal 13-output bank. Bank 4, on the other hand, offers a full 16 universal outputs with negative drivers.

Main functions at a glance:

• 53 universal outputs with + voltage or GND (depending on bank)
• Supply voltage of the controller 12 ~ 14 V, max. 16 V DC/1.5 A, 
• LED display: ON, BANK and PTT
• Temperature sensor: up to 10 18B20s can be connected
• PTT INPUT: RCA or BANK 1 or 2
• PTT "hot switch" protection for ALL BANKs
• PTT OUT: FET 0.5 A, 50 V DC (no delay)
• Analog input max. 16 V DC
• LAN 10/100 MBit with filter and protection
• DHCP IP address ONLY - not static

Banks:

• Bank 1: positive output, requires external DC supply (max. 26 V, 0.7 A)
  
• Bank 2: positive output, requires external DC supply (max. 26 V, 0.7 A)
• Bank 3: positive output supply from controller or external (pin 15), (max. 26 V, 0.7 A)
• Bank 4: negative output switching to ground (max. 50 V, 0.5 A per pin)