Expert Electronics SunSDR2-PRO V5 SDR TRx

Expert Electronics SunSDR2-PRO V5 SDR TRx

€1,999.00
incl. VAT, plus shipping €1,679.83

In stock, shipped in 1 to 2 days

SKU
SUNSDR2-PRO

Supply Scope

  • Expert Electronics SunSDR2-PRO SDR TRx
  • Ethernet cable
  • Power cord
  • 2 pieces adapter jack 3.5mm / 6.3mm
  • Adapter pigtail mini-UHF -> PL socket

One of the few SDRs with 2m VHF!


Modern SDR transceiver for shortwave, 6m and 2m VHF with excellent receiver performance. Suitable for all modes incl. CW, SSB (USB, LSB), FM, AM and digital modes. With wide band receiverfrom 9 kHz to 65 and 96 to 148 MHz.

The SunSDR2-Pro, version 5, is a refined successor to the SunSDR2 transceiver. This evolutionary step picks up experiences collected with daily use of the first series, it offers an even better AD converter, some connectors have been modified, a better local oscillator is used and the software was improved in many points. The result is a modern and future-proof transceiver concept for the demanding ham radio operator.


The receiver of the SunSDR2-Pro is based on the fast 16 bit ADC LTC 2209, which operates at 160 MS/s. This is the basis for an excellent blocking dynamic range (BDR) on HF of up to 130 dB. With the further addition of 9 bandpass filters for HF and one narrow filter dedicated for VHF the result is a receiver with very good sensitivity, a wide dynamic range and strong resilience against strong signal blocking. When used with the ExpertSDR software, two independent receivers are available, the receive window can be up to 312 kHz wide. Additionally a large bandscope of up to 80 MHz width is available.


The transmitter is designed as an independent unit with it's own quadrature oscillators, allowing flexible semi or full duplex operation. This enables the SunSDR2-Pro with a suitable software to be used as a measurement ransmitter and spectrum analyser. Independent amplifiers for HF and VHF produce 20 or respectively 10 Watts transmit power. For HF two switchable antenna connectors are provided, and VHF has a separate connector. Other connectors are provided for transverter operation or use of a power amplifier. Eight freely programmable switching outputs can be used to drive antenna switches, external bandfilters, pre-amplifiers or sequencers.


Another highlight of the SDR transceiver is that the CW keying signals are processed directly by the processor and FPGA of the radio. This ensures that there is no discernible delay when using telegraphy, even QSK with higher speeds is possible. The microphone is also connected directly to the device, two different connectors are provided. One, an RJ-45 socket is compatible with a Yaesu MH-31 dynamic microphone, the other is a 3.5 mm phone socket, for example for a mic of a head set. The decoded audio signal as well as the transmit audio is also available in the digital data stream over the network interface. This enables a flexible layiout either locally in the shack or with remote operation over a local network.


The SunSDR2-Pro is connected by an RJ-45 100MBit/s Ethernet connector. Smart programming of the interface enables the connection of the transceiver either directly to a computer, or via a switch or router integrated into the home network. This offers an easy solution for remote operations of the radio. The audio is available over the network interface as well, allowing "armchair" operation, for example with a simple computer headset.


The freely available ExpertSDR software is under continous development, and will be available free for owners of the SunSDR2-Pro transceiver in the future. Supported operating systems are Win XP, Win 7 and Win 8. Support for MacOS and Linux is planned. The ExpertSDR software is easy to use despite all the complexity of an SDR transceiver. The software provides interfaces (CAT, virtual audio) for other programs, for example contest loggers or multmode programs. In some cases a so called Virtual Audio Cable (VAC) might be required (not provided).


All told the SunSDR2-Pro is a versatile transceiver, designed for shortwave as well as VHF and equipped with an excellent receiver, which will appeal to many radio amateurs and professionals alike. With it's compact size (just 165 x 165 x 30mm) and a weight of only 1kg the transceiver cannot only be used at home in the shack, but also when portable or in a vacation (power requirements12 t o16VDC, 5A max.).


ColibriNANO, ColibriDDC, SunSDR2 QRP, SunSDR2 PRO and MB1+ATU in comparision



[1] without external 10MHz reference clock

[2] Connector "1-770968-0" by TE Connectivit

Technical Data
Product Name SUNSDR2-PRO
Freq Range Receiver 90 kHz - 65 MHz, 95 - 148 MHz
Max. Current Intake (A) 5
Brand Expert Electronics
Weight 1.5 kg
Bluetooth Interface No
Size W x H x D 165 x 165 x 35 mm
Expert Electronics SunSDR2-PRO V5 SDR TRx
Expert Electronics SunSDR2-PRO V5 SDR TRx

Fast Delivery Free consulting Secure payment

€1,999.00
incl. VAT, plus shipping €1,679.83

In stock, shipped in 1 to 2 days

Related categories