RigExpert Open/Short/Load Calibration Set, N
In stock, shipped in 1 to 2 days
Supply Scope
- Calibration set with N terminals
Download
An Open/Short/Load calibration set is a set of calibration standards used to verify and optimize the performance of a network analyzer or other test equipment. The set typically consists of three standards: an open (Open), a short (Short), and a load (Load) standard.
The open standard consists of a terminal with the end disconnected.
The short standard consists of a terminal where the end is shorted.
The load resistor standard consists of connection where the end is connected to a 50 ohm terminator capable of terminating the impedance of the cable.
By using these standards, the network analyzer can correct the parameters of the test setup and improve the measurement accuracy. If the calibration kit is not used, measurements may be inaccurate due to reflections and distortion of the signal as it passes along cables or other equipment.
This OSL kit combines all three standards in a compact form.
The connectors are designed as N connectors (male).
| Product Name | OSL-KIT-N |
|---|---|
| Impedance (Ω) | 50 Ohm |
| Temperature Range | -15 ~ +55°C |
| Brand | RigExpert |
| Weight | 110 g |
| Max. Power | 250 mW |
| Frequency Range | 0 - 2000 MHz (2.5 GHz) |
| Connector | N plug |
| Size W x H x D | 48 x 85 x 25 mm |
In stock, shipped in 1 to 2 days
