RigRunner 10x DC Distribution with Switch

€239.90
incl. VAT, plus shipping €201.60

No longer available

SKU
RR-4010SPLUS

Supply Scope

  • RR-4010SPLUS distributor
  • 1.8m cable with 45A PowerPole plugs
  • PowerPole connector 30A (10rt / 10sw)
  • operating instructions (EN)
The power distribution RR-4010SPLUS is the successor to the RR-4020SC and provides connectors for 10 consumers. In case of over or under voltage a visual and audio alert is triggered. The special feature of the RR-4010SPLUS strip is its switching capability. Once a load is applied to consumer 1, the other consumers 2 to 10 are automatically switched on. For example, by switching on a main consumer such as a radio all other accessories of the station are also switched on. For switching a PowerFET with 90A load capacity with temperature and overcurrent protection. This automatic function can be turned off so that the dependent consumers are always on or always off.


In addition, the power distributor RR-4010SPLUS has many parameters to adjust. Via USB and with the help of a simple terminal program you can adjust the threshold values for over/under voltage alarm, or operation limit for the switching function on the main consumer. Another parameter controls the switch-off delay, adjust the time after which the dependent consumers, when switching off the main consumer, are also switched off. The consumers can be switched off and on via USB command, too. An internal jumper helps to turn off all LEDs for minimum power consumption. These are all useful functions for remote-controlled relay stations with emergency power supply or control functions on board a vehicle.


A micro USB cable, necessary for programming special functions, is not included in delivery!


A RIGrunner is the most convenient and safest way to connect all your 12 VDC equipment to a power source. It is a 13.8 VDC power panel that uses the excellent Anderson Powerpole connectors. Standardize all of your 12 VDC connections using the amateur radio ARES & RACES, RSGB, ARRL Powerpole system.


  • All models are conservatively rated at 40 amps total with any outlet good to 40 amps!

  • Anderson Powerpole connectors, the best DC connectors!

  • Our Powerpole configuration conforms to the ARES, RACES, RSGB standard, and ARRL recommendation for high current 12VDC connectors.

  • Powerpole connectors provide interoperability for emergency communications.

  • Safe secure, HOT CONNECT, polarized, color keyed, genderless connector system.

  • No messy binding posts, frayed wire connections, black tape or short circuits!

  • High current! More than enough 12 V power for your station! Pick the appropriate model.

  • Each outlet may be used at full ratings: transceivers, amplifiers or any accessory.

  • Precision window comparator quick status power monitor, makes a voltage problem obvious.

  • LED over and under voltage indicators instantly indicate a problem, without interpretation.

  • An audio alert is configurable to alarm on overvoltage or under voltage, both*, or may be disabled.

  • Each outlet is individually fused with automotive ATC/ATO fuses. Shipped with appropriate fuses installed.

  • Includes high gauge supply cable, power poles already installed on one side, other side open

  • Unswitched models can use any output jack as the power input with full ratings.

  • ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40 amps.

  • Fuses are quick change; accessible from the outside using high quality fuse holders.

  • Each fuse has a handy blown fuse LED illuminator to show short circuit problems instantly!

  • RF suppression on each outlet to suppress RF leakage between equipment. Keeps your power supply in regulation.

  • Commercial quality construction just like our RIGblasters. No Sharp edges, no plastic.

  • A full array of quick change Powerpole power supply, extension and adapter cables available.

  • Mounting with supplied 3M Bumpon® protective feet, 3M® adhesive pads or screwed down using any #6 or #8 screws.
Technical Data
Product Name RigRunner 4010S Plus
Max. Current Output (A) 40 A
Voltage Display LED
With fuse(s) 1x at the input, 1x per output
USB Output No
Banana outputs 0
PowerPole outputs 10
Switched outputs 9
Brand RigRunner
Weight 433 g
Documentation Languages EN
Size W x H x D 35 x 298 x 71 mm
RigRunner 10x DC Distribution with Switch
RigRunner 10x DC Distribution with Switch

Fast Delivery Free consulting Secure payment

€239.90
incl. VAT, plus shipping €201.60

No longer available

Related categories