SSB Electronic LNA series preamplifier 6m - 70cm

Completely newly developed low-noise amplifiers for the bands 6m (50 - 52 MHz), 2m (144 - 146 MHz) and 70cm (430 - 440 MHz) from SSB-Electronic.

The new amplifiers are super low-noise with high gain. This makes them ideal for use in EME, MS, Aurora and Tropo DX operation.

The new LNA series also cuts a fine figure in test operation: high IP3 values stand for high large-signal immunity. Good near and far rejection guarantees interference-free operation even in the vicinity of radio and other transmitting stations, such as company transmitters and cell phone/mobile phone relays.

The amplifiers are built in a sturdy tinplate housing, suitable exclusively for indoor applications (Ip41 to DIN EN 60529). 

Choose between the connection standard N-socket, N-plug (for direct installation on the relay etc.) or SMA.

The amplifier can be supplied with power via an external cable or via the coaxial cable at the output of the amplifier (remote power supply).

The weatherproof variant of the LNA series is characterized by a robust, IP44-protected housing, allowing the high-quality preamplifier to be installed close to the antenna. Power is supplied exclusively by remote power supply. If your receiver does not output an LNA power supply at the antenna input, we recommend using the DCC-5000PRO remote power supply (item no.: 26138). These amplifiers are equipped with N sockets.

The products in the LNA series are preamplifiers that may only be used for receiving purposes. For transmitting purposes, the products of the SP and MHP series from SSB Electronic are an excellent choice.