USB Battery Pack Keep-Alive Load
In stock, shipped in 1 to 2 days
- USB Battery Pack Keep-Alive Load
USB Electronic Load to prevent power-bank low-current shut-down
USB battery packs are a convenient way of powering low power USB devices such as WSPRlite. Unfortunately many USB battery packs switch off (go into a sleep mode) if the current being drawn is too low. This means that your device works for a few minutes and then stops. Often just a few extra milliamps current draw will keep the battery pack alive. There are various circuits on the web that give a pulsed load which works with some battery packs - but unfortunately our tests have shown that such circuits don't work reliably with all battery packs.
Our solution is a variable electronic load. We have designed it to be very simple to use. Just plug it into your battery pack and increase the current until battery pack stays on reliably (6 - 150 mA). Depending on the current that your powered device takes that may be a little as a few milliamps. An on-board LED indicates if the battery pack is live. The load supports a standard USB data connection. USB plug and socket for easy in-line connection. Clear heat-shrink sleeving is provided to protect the unit in the field.
Easy to use
To use, just plug the Keep-alive load between your battery and item
to be powered and adjust the blue potentiometer on the unit with a fine
screwdriver. Set it fully clockwise at first (maximum current) and
gradually decrease the current until the battery pack just cuts out.
Then increase the current until the battery pack stays on reliably. That
way you only draw just enough current for reliable operation -
increasing the life of your battery
|USB Battery Pack Keep-Alive Load