YRC-3 Digital Rotator Controller

• Hy-gain YRC-3 gives more features and a much more robust controller that is far less prone to lightning damage.
  
  
• Costs less than repairing your original Yaesu controller!
  
  
• YRC-3 has all features of the YRC-1 plus

• It gives you 6 programmable memories!
  
  
• Easy-to-use -- dial in your beam heading and tap GOTO button.
  
  
• Exclusive 180 degree AutoReversal TM for fast longpath operation.
  
  
• Variable DC motor speed for minimizing damaging antenna overshoot and fast operation.

• Intuitive menu for calibrating,
  
  
• Offset-ting, or changing parameters.
  
  
• Field upgradeable firmware.
  
  
• Use with Yaesu G-800/1000/2800/G450/650 rotors.
  
  
• For AC or DC motors.
  

YRC-3X Calibration:

1. Use the "Right" button to turn the rotor to the right (cw) as far as it will go (mechanical stop).
Long touch "Heading Set" to display the menu. Turn "Heading Set" to
Calibrate. Tap "Set Header". Set "Heading Set" to "Right Stop South". To touch
"Direction setting" to save. The display now reads 180.

2. Turn the left rotor (ccw) to the end with the left button. Touch and hold "Set direction".
since the menu is shown on the display. Set "Heading Set" to "Calibrate". Tap "Set Header".
Set "Heading Set" to "Left Stop South". Tap "Set Header" to save. On
display now reads 181 or 182.

3. With "Offset" in the menu you can set the rotor to turn south at exactly 180