OM2000A+ HF Amplificateur automatique, 2000 W
5 399,00 €TVA 19% inclus sans frais de port
Uniquement sur commande, livraison en 20 jours.
The OM-2000A+ is one of the most lightweight and compact automatic amps of the 2000 W class. The ceramic tetrode FU-728F supplies sufficient power for all situations, whether you do SSB, CW or RTTY. Any standard transceiver with a power of 40 to 60 W is sufficient to drive the amplifier. The amp is suitable for all HF bands from 160 to 10m incl. WARC bands, and the 6m band as well.The remarkable feature of the OM-2000A+ amplifier is the fully automatic operation. No manual tuing required - the amplifier measures the input frequency and adjusts itself automatically. This happens very fast - in about 0.5 secionds withon one band, and in about 3 seconds when changing bands. And this fully automated operation does not even require a CAT connection to the radio, which makes the setup very easy. But of course you can hook up most transceivers via the CAT system to get ven more convenience when operating the amplifier. Another connection the EThernet link to your local network. With the software by OM-Power you have full remote control and surveillance of the amplifier from any computer in the network.Like all OM-Power amps the OM-2000Aü+ is equipped with all the usual safety mechanisms, for example protection against high SWR, error in anode current or voltage, error in grid current or voltage, hi temperature or open enclosure and much more. A memory stores older faults and helps diagnose such situations larter, after the fact. The 4.3" large colour LC display shows all parameters and the operating condition in an easy to read manner. Further this dislay is also the only operating control - it is is a touch panel. The power supply is done with one single 230V AC supply, power intake is approx. 3 kVA.-Remarkablefeatures of OM-Power OM-2000A+-Automatic band switching-Automatic tuning-Automatic band filter selection-Easy to read display also for fault diagnosis-Fault memory-Three selectable operating modes for the cooling system (two fans)-QSK capable T/R switching with vacuum relay-The AC transformer can be removed easily for transport-Remote control and surveillance via standard Ethernet netowrkTechnical Data OM-2000A+ Gamme de fréquence 1.8-29.7 MHz, 50-52 MHzPuissance de sortie SSB (HF) 2000 WCW (HF) 2000 WRTTY (HF) 1500 WPuissance de sortie SSB (50 MHz) 1500 WCW (50 MHz) 1500 WPuissance d'entrée 40 – 60 WImpedance Entré 50 Ω (VSWR ≤ 1.5:1)Impedance Sortie 50 ΩGain 17 dBTOS maxi à la sortie 3:1SWR protection Autom. switch off when reflected power ≥ 350WIntermodulation distortion ≤ 32 dBcSpurious emission suppression 1.8 – 30 MHz ≥ 50 dBc30 – 54 MHz ≥ 70dBcTuning Speed 0.5s in band, max. 3 s out of band Elecraft, Icom, Kenwood, Ten-Tec Orion, Yaesu Tube FU-728FVentilateur 1x radial, 1x axialTension d'entrée 200,220,230,240 VAC 50/60HzDimension 390 x 195 x 370 mm (W x H x D)Poids 24 kg
|Remote Control capabilities||oui|