

HEIL Headsets
Content of this page
- HEIL PROSET-3 Headphone
- HEIL PROSET-7 professional Headset
- HEIL PROSET-6 Headset
- Proset Elite Profi Headset
- BM-10
- Pro Micro
- Accessories Heil Proset/Proset Plus/Quiet Phone Pro/Proset Elite
- Heil Adaptor cables for Proset, Proset Plus, Quiet Phone Pro, BM-10, Proset Elite
- FS-50
- Heil FS-3
- FS-100
- Spare Parts for Heil Headsets
The Heil Microphones and accessories are on it's own page.
HEIL PROSET-3 Headphone

From the successful series of microphones and headsets HEIL has developed a lightweight headset. The Pro-Set 3 is a headphone with a 40 mm neodymium magnet. The frequency range 10 Hz to 22 kHz shows that these headphones have been designed not only for the operation of a radio. Delivery will be with three detachable cables. A flexible 1.8 m straight cable with 3.5 mm jack. A 1.8 m straight cable with 3.5 mm jack for iPhone / iPod, and a 3m coiled cable with 3.5 mm jack. An adapter to 6.3 mm jack is included.
Order No. | |||||
---|---|---|---|---|---|
PRO-SET-3 | Headphone with 3 cables | 126.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
HEIL PROSET-7 professional Headset
The new PROSET 7 has two large gel earpieces for a comfortable fit, also during extended wearing time, which also ensure a high level of suppression of ambient noise: 26 dB attenuation according to manufacturer.
The headset is stereo, so that signals from two receivers (pileup and Dxpedition) can be listened to and leveled out via the integrated balance controller separately.
As with all other larger HEIL headsets there is a switch for one-sided phase reversal to turn the received signal 'in your head', and also to ease symptoms of fatigue during contest.
The PROSET 7 has a detachable connecting cable and is available either with dynamic microphone capsule HC-7 or with an electret capsule for ICOM. The microphones are interchangable so that one headset for both equipment lines can be used.
The adapter cable ADIC-8 is included in the version for ICOM, for other models an adapter cable AD-1 is required.
The PROSET 7 is available in different colours.
The HC-74 (orange) is a redesign of the popular HC-4 element and has been developed for serious contest/DX operators. It rolls off the low end at 600 Hz with a 10 dB rise at 2500-3000 Hz, which creates a very articulate signal to break through pileups.
- Optionally the following items might be necessary:
- one Heil adaptor cable AD-1-x-x suitable for your radio
- one PTT foot or hand switch
HEIL PROSET-6 Headset

Boomset with large, padded headphones. The headphones are covered with a cotton cloth for better comfort. Boomset microphone with either HC-6 or Icom element.
The phase-reversal switch switches one earphone in phase by 180°, leading to a very astonishing effect: either the sound is perfectly centered or it becomes spatial and get easier to decode. Impedance 200 Ω.
Which microphone for Icom?
Older Icom radios like IC-775DSP, IC-765 usw. and the current IC-7000 require the Icom element, the IC-7000 requires additionally an adaptor ADIC-M!
Other newer radios should use the HC-6: IC-746, IC-7300, IC-7400, IC-756Pro1/2/3, IC-7600, IC-7610, IC-7700, IC-7800/7850/7851 etc.
Order No. | |||||
---|---|---|---|---|---|
PRO-SET-6 | with cartridge HC-6 | 179.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
PRO-SET-IC | for ICOM with ICOM cartridge. ADIC-8 adaptor included! | 195.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
- Optionally the following items might be necessary:
- one Heil adaptor cable AD-1-x-x suitable for your radio
- one PTT foot or hand switch
Proset Elite Profi Headset

Heil Proset Elite
The professional headphone/microphone combo Heil Proset Elite fills the upper range of Heil headsets. The Proset Elite offers large, round padded earpads with removeable cotton covers. These earpads allow comfortable use even for long times. The audio rendition is adopted to voice transmission for amateur radio, resulting in an excellent intelligibility. As all headsets of the 'Proset' series the Elite headset is equipped with a phase switch on one speaker. This phase switch shifts the audio on one side of the phones by 180°, resulting in a often surprisingly better intelligibility, a nearly 'spatial' localisation of the signal and better separation from background noise becomes possible.
Another innovation on the Proset Elite is the new dynamic microphone element HC-6, which is offered for this headset. Bob Heil introduces this new element as a response to the many newer radios which offer a transmit audio equalizer (e.g. FT-2000, FT-950, IC-7400, IC-756Pro etc). Due to this equalizer there is no more need for special mic elements with reduced bandwidth (like the HC-4). The new HC-6 has a wide frequency response with -3 dB points at 100 and 12500Hz and is highly suitable for SSB or AM/FM with high fidelity. For contest or DX operations you can adjust the equalizer in the radio for better 'punch'.
For older Icom radios, which require a higher microphone audio level, the Proset Elite is also offered with the 'IC' electret mic element. This element requires 5V supply voltage, which is available on nearly all Icom transceivers.
The Heil Proset Elite comes with a 180cm long spiral cable, which is equipped with a 3.5 mm mono phone plug for the microphone, and a 3.5 mm stereo phone plug for the headphones. Included is an adaptor 3.5 to 6.3 mm phone plug stereo. The Proset Elite further requires an adaptor AD-1-x-x for your radio.
Order No. | |||||
---|---|---|---|---|---|
PSE-6 | Heil Proset Elite with HC-6 dyn. element | 213.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
PSE-IC | Heil Proset Elite with Icom electret element, includes ADIC-8! | 229.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
PSEXWINDS | Heil Proset Elite Spare part - Wind screen | 9.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
PSEXCABLE | Heil Proset Elite Spare part - connector cable | 18.90 € | Add to shopping cart | New | In stock, shipped in 1 or two days. ⓘ |
Info freight charges |
- Optionally the following items might be necessary:
- one Heil adaptor cable AD-1-x-x suitable for your radio
- one PTT foot or hand switch

BM-10

Extremely lightweight headset, ideal for field day or expedition. In the cable, a PTT button with a clip is included. So the switch can be mounted in an easily accessible place.
For Icom radios are the BM-10 with special Icom capsule. Here the adapter ADIC-8 is in the supply.
Order No. | |||||
---|---|---|---|---|---|
BM-10 | BM-10 Headset, dyn. Kapsel | 126.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
BM-10-IC | BM-10 Headset for Icom, ADIC-8 included! | 145.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
- Optionally the following items might be necessary:
- one Heil adaptor cable AD-1-x-x suitable for your radio
Pro Micro
The ProMicro is a lightweight headset with one or two open speakers. The flexible boom microphone is equipped with the new Heil HC-6 dynamic element, which offers a wide and clear modulation. For DX or contest operation most recent radios offer an equalizer to influence the modulation to your needs. Due to the light contruction this headset is perfect for long operatiuon with getting tired. The Heil ProMicro Headset is available with one or two speakers. The one-sided version is useful in situations where you need to hear other acoustic information from around you, for example tzhe whining dog who needs to go outside very urgently.
With various adaptor cables this headphone can be used on nearly any radio. For older Icom transceivers (before IC-756Pro) we recommend the Traveler headset with dynamic Icom mic element. For operation of the ProMicro an adaptor cable AD-1-xx and a PTT switch is required additionally.
Order No. | |||||
---|---|---|---|---|---|
PROMICRO | with one speaker | 108.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
PROMICRODUAL | with two speakers | 128.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
PROSETXWINDS | Replacement microphone windscreen | 7.40 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
- Optionally the following items might be necessary:
- one Heil adaptor cable AD-1-x-x suitable for your radio
- one PTT foot or hand switch
Accessories Heil Proset/Proset Plus/Quiet Phone Pro/Proset Elite
Proset Bag
Robust leatherette case for Heil Pro-Set or Pro-Set Plus, with extra compartment for accessories like adapters, cables and batteries.

Order No. | |||||
---|---|---|---|---|---|
PRO-SET-BAG | 32.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | ||
Info freight charges |
Heil Adaptor cables for Proset, Proset Plus, Quiet Phone Pro, BM-10, Proset Elite

AD-1-xx is required for most Heil headsets (ProSet, ProSetPlus, Quiet Phone Pro, BM-10, Proset Elite etc.). These cables are available with either 8 pin round Foster connector or RJ-45 modular connector, for several radio models. The headsets with Icom microphone element require different cables: ADIC-xx. The Icom element is an electret element, the phantom power supply comes from the mic connector of the radio. In contrast to the AD-1-I-x cables the ADIC-x cables do not contain a capacitor.
Order No. | |||||
---|---|---|---|---|---|
AD-1-I-8 | Adaptor cable, 8 pin round for ICOM, incl. capacitor | 24.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
AD-1-I-M | Adaptor cable, 8 pin RJ-45 for ICOM, incl. capacitor | 24.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
ADIC-8 | Adaptor cable, 8 pin round, for Icom, without capacitor | 30.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
ADIC-M | Adaptor cable, 8 pin RJ-45, for Icom, without capacitor | 30.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
AD-1-Y-8 | Adaptor cable, 8 pin round for Yaesu | 24.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
AD-1-Y-M | Adaptor cable, 8 pin RJ-45 for Yaesu | 24.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
AD-1-K-8 | Adaptor cable, 8 pin round for Kenwood | 24.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
AD-1-K-M | Adaptor cable, 8 pin RJ-45 for Kenwood | 24.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
Adaptor 8 pin round to RJ-45 modular

This special adapter converts the modular input of several rigs to the familiar 8 pin male Foster plug that will mate with all of our AD-1 adapters and CC-1 Microphone Connecting Cables. The adaptor brings out the Mic audio, Mic Shield Ground, PTT and PTT ground. This interfaces perfectly with our HMM-Y hand microphone, CC-1Y connecting cables for the HM-10 or Goldline microphones as well as the AD-1 Y adapters for the BM-10, PRO-SET or PRO-SET PLUS! headsets, or any of the Heil headsets.
Order No. | |||||
---|---|---|---|---|---|
ADM-817 | for Yaesu FT-817/857/897450 | 40.30 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
FS-50

Footswitch (noname, not by Heil) with rubber coating, includes cable and plug, suitable for all AD-1 and CC-1 adaptors. Cable length approx. 180cm.
Order No. | |||||
---|---|---|---|---|---|
FS-50 | 14.90 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | ||
Info freight charges |
Heil FS-3
Wide Heil footswitch FS-3 with anti-skip rubber coating on both sides. Includes cable with 6.3 mm phone plug for PTT, suitable for all AD-1 and CC-1 adaptor cables. Cable length approx. 300cm.
Order No. | |||||
---|---|---|---|---|---|
FS-3 | PTT Footswitch | 38.00 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
FS-2

Large foot switch, two different keying ports, one closes earlier than the other. Both cables approx. 200cm length.
Order No. | |||||
---|---|---|---|---|---|
FS-2 | 63.30 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | ||
Info freight charges |
FS-100
Massive footswitch with 6.3 mm jack for direct connection to the HEIL Adapter cable. In the small switch the foot remains on the ground and push the button with either the heel or the toe. Between the passages the position will inevitably lead to a spasm of the foot. With this switch the whole foot is on the switch and by a slight rocking motion, the PTT is pressed.
The switch has 3 holes so you can still screw it additionally fixed on a board or similar. Cable length approx. 200cm.
Order No. | |||||
---|---|---|---|---|---|
FS-100 | Heavy Duty Foot Switch | 29.50 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | |
Info freight charges |
HS-2

The Heil 'Magnum' Hand-Switch PTT
Ergonomically correct, it's shape fits the hand naturally and comfortably, activating just like a pistol trigger.
- HS-2 Features:
- Ergonomic design
- Very light touch trigger switch
- Terminates into a 1/4" phone plug which connects into the Heil AD-1 or CC-1 cables.
- Using a very reliable 15 amp MicroSwitch
- Chrome spring cable grommet (just like you Mom's old iron!)
Order No. | |||||
---|---|---|---|---|---|
HS-2 | 44.90 € | Add to shopping cart | In stock, shipped in 1 or two days. ⓘ | ||
Info freight charges |