Antennen rotators HyGain
Worldwide renowned antenna rotators for up to 2 m² antenna surface.
HyGain antenna rotators are constructed with double or triple ball bearings for maximum stability and have electro-mechanical brakes which blocks the gear shaft, preventing the antenna to turn in strong winds. When rotating the antenna the brake is opened automatically and closed again (delayed) after reaching the final position.
HAM-IV with analog control unit
The rotators are designed for installation on a flat surface (rotator platform), for mounting on a tube mast optional clamps are required. Solid aluminum die-cast case, precision tooled gear wheels, all mounting hardware stainless steel. Max. diameter for tubular antenna mast is 52mm.
The rotators are avaiblabe with two different control units:
The analog unit has push buttons for direction and brake and an illuminated analog instrument for direction control.
The DCU-3 is a digital control unit, suitable for all HyGain rotators like the HAM-IV, T2X Tailtwister etc. A large LC display shows the currect antenna direction in degrees and as compass heading. Additionally the reverse direction from the other station to your location is displayed, along with your callsign. The easy to read, blue LC display has white lettering, the size is 35 x 66mm.
To facilitate the safe and precise rotation also of large antenna systems, the DCU-3 controller uses various methods for positioning. A brake, as it is used on some rotators, will be released and closed again, but only when the final position has been reached. The motor is stopped early, before reaching the final position. This reduces unnecessary load on the rotator and overshoot of the inert antenna.
The DCU-3 control unit is equipped with both, a serial and an USB interface. This allows easy integration of the rotator into the station. The rotator can be directly controlled by Ham Radio Deluxe or similar programs. The DCU-3 sizes are 215 x 110 x 228 mm (WxHxD).
Two different Rotator models are availabe:
HAM-IV for up to 1,6m² antenna surface and T2X 'Tailtwister' for up to 2,2m² antenna surface.
|Max. antenna surface (with support bearing)||1,6||2,2||m²|
|Max. antenna surface (without support bearing)||0,6||1,1||m²|
|Brake||electricall operated clutch|
|Ball bearings||Double/96 balls||Triple/138 balls|
|Number of control wires||8||8|
|Weight incl. control unit||ca. 12||ca. 14||kg|
|Max. bending moment (with support bearing)||3800||4600||Nm|
|25050||HAM-IV with analog control unit||758.00 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|25050.DCU||HAM-IV with digital control unit DCU-3X||942.00 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|25060||T2X Tailtwister with analog control unit||919.00 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|25060.DCU||T2X Tailtwister with digital control unit DCU-3X||1103.00 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|25066||Digital Control Unit DCU-3X alone||489.00 €||Add to shopping cart||New||Ordered only on customer request, down payment required, delay at c. 50 days. ⓘ|
|25070||Set of heavy clamps, suitable for both models||147.20 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|40010.8||8-wire rotor control cable 0.75mm², price per meter, 8mm Ø||1.80 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|Info freight charges|
Common Spareparts for HyGain Rotators
|25075.X01||Potentiometer for HAM-IV and T2X||54.10 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|25075.X02||Motor capacitor for HAM-IV and T2X||11.50 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|25030.ROTOR||Plug for HyGain Rotors rotor side||22.30 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|25030||Plug kit for HyGain Rotors, both sides (same as included in delivery)||45.80 €||Add to shopping cart||In stock, shipped in 3 to 4 days. ⓘ|
|Info freight charges|