Icom Software

Icom RS-BA1 Remote Control Software

You got too much QRM/QRN at home? But you have access to a distant area which is quiet (radio wise)? Why not put your station there? Or control your radio in the attic from the computer in the cellar via your local network. Either is possible with the remote control software RS-BA1 by Icom. Or let other operators use the club station when it's idle...

The software RS-BA1 by Icom consists of two parts, a so called 'Server' and a 'client' part. The server is used on a computer at the remote site, where the transceiver is located. Someplace else you have another computer running the Client software. Both computers are connected over a network, either a Local Area Network (LAN) or the internet. Imagine your remote station located anywhere in the worls, controlled over the internet!

The RS-BA1 Software supports the following Icom transceivers:

  • IC-7850/7851 (via USB or Ethernet cable)
  • IC-7800 (via Audio/CAT-Interface)
  • IC-7700 (via Audio/CAT-Interface)
  • IC-7610 (via USB cable)
  • IC-7600 (via USB cable)
  • IC-7410 (via USB cable)
  • IC-7300 (via USB cable)
  • IC-7200 (via USB cable)
  • IC-9100 (via USB cable)
  • IC-756ProI to III (via Audio/CAT-Interface, with some limitations)
  • IC-746Pro/IC-7400 (via Audio/CAT-Interface, with some limitations)

For operation the transceiver must be connected with the server computer. Those Icom transceivers with USB interface require just the supplied USB cable. Other transceivers require a soundcard/CAT interface to connect audio and CAT data with galvanic isolation. In principle any soundcard interface will do, like our SB-2000, the USB-2, USB-3, Digikeyer microKeyer and many others. Operation is also possible with older Icom transceivers, but only with very limited possibilities (just control of frequency and mode, nothing else).

RS-BA1 Version 2 New

At the Tokyo Radio Show 2018 Icom introduces a new version of this software. For major functional changes see list below. Of course this software can be used with older transceivers as well, see function table. Please note the omission of support for older OSs like Windows XP and WIndows Vista. The previously sold version RS-BA1 (without 'Version 2') is not available anymore.

  • New functions in RS-BA1 Version 2
  • Dual Watch/Dual VFO/Dual Waterfall [1]
  • RIT/XIT function [2]
  • SUB Dial [2]
  • Requires Windows 7, 8 or 10, 32/64 Bit (Discontinuation of support for Windows XP and VISTA)

[1] Dual Watch/Dual Waterfall only with IC-7851, IC-7850, IC-7610.

[2] depending on radio.

Please note that Icom does not offer an upgrade path from the first edition of 'RS-BA1' to the new 'RS-BA1 Version 2'.

  • RS-BA1 Version 2 Minimum Requirements of computer (Server and/or Client)
  • Microsoft Windows Windows 7, 8 or 10 (32/64 Bit)
  • Multicore-CPU, min. 1.8 GHz
  • Memory 2GB to 4GB, depending on OS version
  • 150MB disk space
  • Screen resolution 1024 x 600 px or larger
  • Network: DSL with at least 350kbps Upload/500kbps Download or 10/100MBps LAN
Order No.
RS-BA1V2 Icom Remote Control Software Version 2 79.90 € Add to shopping cart In stock, shipped in 1 to 2 days.
Info freight charges
Download: RS-BA1 Version Brochure (PDF, EN, 1MB)
RS-BA1/RS-BA1V2 Function Compatibility Chart
IC-7610 IC-7600 IC-7410
IC-7300 IC-7200 IC-7100
Dualwatch Function Yes - Yes - - - - -
Server Function Yes Yes Yes - - - - -
Remote Power ON/OFF Yes Yes Yes Yes - Yes - Yes
Spectrum Waterfall Scope Yes - Yes - - Yes - -
APF AF Level Adjustment Yes Yes Yes Yes - - - -
CW Keyer Yes Yes Yes Yes Yes Yes - Yes
Voice Recording/Playback Yes Yes Yes Yes Yes Yes Yes Yes
USB Dial with Optional RC-28 Yes Yes Yes Yes Yes Yes Yes Yes

Icom Remote-Encoder RC-28 Remote Control Unit

Connect the RC-28 via USB-Port with a PC and operate the Remote Control Software RS-BA1 easily.

  • Adjustable tuning sensitivity and automatic tuning steps (OFF/Low/High)
  • Two programmable buttons for 4 functions (briefly press or hold)
  • Big, easy to use PTT button
  • The RC-28 remains controllable while there is another application opened on the desktop at the same time
Order No.
RC-28 Icom Remote Control Unit 229.00 € Add to shopping cart In stock, shipped in 1 to 2 days.
Info freight charges