
Strumentazione
MiniVNA-Tiny

428.00 €
MiniVNA-Pro2 BT

389.00 €
SNA-2550

1249.00 €
Calibration Kit

21.00 €
HacKRF One

285.00 €
Analizzatore di Rete Scalare

SNA2550: analizzatore di rete scalare basato su PC fino a 2500 MHz
L'ultimissmo prodotto della ELAD è una 'black box' eccetto che per i connettori. Tutti i controlli ed il display sono gestiti dal PC, connesso via USB 2.0. Questa non è solo una buona ed economica soluzione, ma offre molte più possibilità come la stampa, l'archiviazione, l'uso mobile, etc.
Come un analizzatore di rete tradizionale, l' SNA-2550 misura trasmissione e rilfessione da 400 kHz a 2500MHz in cinque range. Il livello di uscita è regolabile tra -50 e 0dBm, il range dinamico è 60dB. L'attenuatore d'ingresso può essere regolato da 0 a 50 dB in 10 dB passi. Un cavo coassiale semi-rigido è fornito per la calibrazione automatica della periferica.

L'alimentazione dell' SNA-2550 (12-15V) è fornita attraverso il cavo USB incluso.
L'interfaccia utente sul PC è simile ai tradizionali analizzatori di rete. Tutte le misure e i settaggi possono essere salvate e richiamate più avanti. E' richiesto Windows 2000™, Windows XP™, Vista o WIndows7 32/64bit.
Ordine No. | |||||
---|---|---|---|---|---|
SNA-2550 | Analizzatore scalare di rete | 1249.00 € | Aggiungi al carello | Non in magazzino, verrà ordinato solo su richiesta, deposito cauzionale richiesto, tempi di consegna c. 28 giorni. ⓘ | |
Info sui costi di spedizione |
SNA-2550 Review from Funkamateur 07/2007 (PDF, DE, 400KB).
SMA quick release connector
42860 SMA-Quick release plug/SMA socket, gold plated Very helpful adaptor where the connections needs to be exchanged very often, for example on a test site. The plug side does not have a thread but a feathered jacket which provides a secure connection.Ordine No. | |||||
---|---|---|---|---|---|
42860 | SMA Quick Release adaptor | 7.90 € | Aggiungi al carello | Nuovo | In magazzino, spedizione in 1 o 2 giorni. ⓘ |
Info sui costi di spedizione |
SMA Male/Female Adaptor

All RF connectors wear with use. The RF Explorer SMA ports are subject to minimal wear each time the connector interface is coupled and de-coupled with an antenna, a SMA cable, an attenuator or a RF device of any kind. If you repeat plug/unplug operations over the RF Explorer SMA port hundreds of times, the SMA port may underperform over time and exhibit undesired attenuation.
To protect the SMA port for frequent plug/unplug operations, you can use this adaptor and keep it directly attached to the RF Explorer port. Then you plug/unplug other RF devices into this adaptor, not the original SMA port. After hundreds of operations, if the adaptor wear and show attenuation or reliability problems, you can just replace it by a new one and always keep your original RF Explorer SMA port intact.

Ordine No. | |||||
---|---|---|---|---|---|
42850 | SMA Male/Female Adaptor | 5.20 € | Aggiungi al carello | In magazzino, spedizione in 1 o 2 giorni. ⓘ | |
42910 | SMA Male/Female Adaptor 90°-angled | 5.60 € | Aggiungi al carello | In magazzino, spedizione in 1 o 2 giorni. ⓘ | |
Info sui costi di spedizione |
Calibration Kit SMA

For devices with SMA connector, consist of one 50Ω terminator, ref. 21001.SMA plus one open, one short.
Ordine No. | |||||
---|---|---|---|---|---|
21010.SMA | Calibration Kit SMA | 21.00 € | Aggiungi al carello | In magazzino, spedizione in 1 o 2 giorni. ⓘ | |
Info sui costi di spedizione |
Adjustable Attenuator Nuovo
Adjustable attenuator for receivers and instrumentation systems up to 1000 MHz. With it's precisely adjustable attenuation of 0 to 20 dB this attenuator is well suited to improve reception on an SDR, for example to match the input signal to the saturation free range of the AD converter. Or make comparative measurements on antennas and much more. The attenuator is enclosed in a shielded metal box, the connectors are BNC type (male, female). The adjustment is done with an easily reachable knob on the top side. Insertion loss only 0.2 dB, suitable for systems with an impedance from 50 to 75 Ω.
Ordine No. | |||||
---|---|---|---|---|---|
12450 | Adjustable Attenuator 0-20dB | 24.50 € | Aggiungi al carello | Nuovo | In magazzino, spedizione in 1 o 2 giorni. ⓘ |
Info sui costi di spedizione |
Attenuatori

Atennuatore | ||||
---|---|---|---|---|
Typ | DS-1 | Nuovo | ||
Impedanza | 50 | 50 | Ω | |
Smorzamento | 3/6/10/20 | 3/6/10/20/30 | dB | |
Potenza mass. | 1 | 2 | W | |
Gamma di frequenze | 0-6000 | 0-6000 | MHz | |
ROS/Tolleranza | 1.3:1 max | |||
≤ 1,0 GHz | - | - | ||
≤ 2,0 GHz | - | - | ||
≤ 2,5 GHz | - | - | ||
≤ 3,0 GHz | - | - | ||
≤ 6,0 GHz | <1,3 | ±0,5 | - | |
Connettore | SMA | N | ||
3 dB | 21005.03 | 21013.03 | ||
6 dB | 21005.06 | 21013.06 | ||
10 dB | 21005.10 | 21013.10 | ||
20 dB | 21005.20 | 21013.20 | ||
30 dB | - | 21013.30 |