CG-Antenna RTC-200 Rotor Control Interface Nouveau
The RTC-200 is a compact interface to connect compatible Yaeso rotors to a computer. You can use all Yaesu rotors with 6-pin MiniDIN 'Ext. Control' connector, a suitable cable is included. The RTC-200 offers connections to two rotors at the same time, to support satellite antenna systems with azimuth and elevation motors. Towards the computer the interface is connected by USB, a cable is included.
The RTC-200 interface uses the Yaesu rotor control protocol, just like the GS-232A/GS-232B interface by Yaesu. This makes this interface compatible to nearly all rotor control programs on the market. The interface requires a supply voltage of 8 to 15 V DC, a cable is included.
For installation a driver must be downloaded from the manufacturers website. This download also includes a small rotor control application (Windows only). Download address www.cgantenna.be/rtc200/RTC200.zip.Contrary to the description in the english manual, the product no longer comes with a CD.
- List of supported Yaesu Rotors
- all other models with an 'Ext. Control' socket
What if my rotor does not have the 'Ext., Control' socket? On the Ext. Control socket of a Yaesu rotor (except G-5500) there are simply the signals of the three buttons 'left rotation', 'right rotation' and (if available) 'brake release', as well as the analog signal 'direction' and of course 'ground'. Such a socket could be retrofitted relatively easily to other rotors, even to those of another manufacturers.
- Contenu de la livraison
- RTC-200 Interface
- USB A/B Cable, 150cm
- 6p MiniDIN/6p MiniDIN cable, 150cm
- DC cable with barrel connector, 100 cm
- Printed manual, english
|RTC-200||CG_Antenna RTC-200 Rotor Control Interface||109.00 €||Ajouter au panier||Nouveau||Pas de stock, expedition le 06. juin. 2019 ⓘ|
|Info frais de port|