WLAN Antennas 5GHz
Omnidirectional and directional antennas

5GHz Omni directional

GP5000-10, GP5000-12

Professional vertical antennas, omni directional, for 5GHz WLAN frequency range (5400-5870 MHz). SWR better than 1:1.5. Weatherproof model for outdoor use, but also suitable for indoor applications. Includes mounting hardware (stainless steel) for mast mount. Mast diameter from 20 to 55 mm supported. White color, connector N jack (female).

GP5000-10 GP5000-12
Frequency Range 5100-5900 5100-5900 MHz
Gain 10 12 dBi
SWR <1:1.5 <1:1.5
Max. Power 20 20 Watt
Connector N socket N socket
Mast Diameter 30 - 50 30 - 50 mm
Temperature range -30 bis +60 -30 bis +60 °C
Length ohne Montagerohr 430 560 mm
Weight ohne Montagematerial 0,23 0,26 Kg
Order No. 18715.10 18715.12
Price 102.40 € 136.90 €
Add to shopping cart Add to shopping cart
In stock, shipped in 1 or two days. In stock, shipped in 1 or two days.
Download: Data sheet GP-5000-10 (PDF, DE/EN, 500KB)
Download: Data sheet GP-5000-12 (PDF, DE/EN, 724KB)

Supplied mounting hardware for GP-5000

This mounting hardware can be used for mast or wall mount, also indoors. With this the antenna is suitable for indoor coverage, the ideal installation place would be the staircase.


Omni directional antenna with N connector (male)

Use indoors or outdoors, either mount to wall with optional bracket (see below), or mount on top of equipment rack. For vehicle use (antennas are weatherproof) suitable N base mounts are available.

Frequency Range 5.1 - 5.5 GHz
Gain 7 dBi
Weight 180 g
Colour White
Dimensions 20 mm ø × 424mm
Order No. 18718.10
Price 102.40 €
Add to shopping cart
In stock, shipped in 1 or two days.

HCT-2400/5000 Rugged M2M Antenna

18608 Nylon M2M Antenna Wifi 2400MHz HCT-2400

Very robust Wifi antenna in Nylon casing!
The HCT-2400/5000 is a compact and robust Wifi 5GHz antenna for installation on flat surfaces like a machine wall or roof of a kiosk terminal or the sheet metal of a vehicle. Due to the use of Nylon this antenna is resilient against adverse environments, making it suitable for use in the chemical or mining industry. The industrial application of the HCT-2400/5000 is also supported by the wide temperature range of -40 to +85°C.

The case is protected class IP67 when mouted, a rubber gasket on the lower side is used for additional proetction. The antenna is mounted by a single hole mount. A central stub (17 mm Ø × 23mm) is used to install the antenna with a screw from the inside. The cable (300cm RG-316, SMA connector) is also fed through this central stub. This makes installation of the antenna very simple and easy. The diameter of the HCT-2400/5000 is 50mm, height 47mm, weight 80g.

The gain of the HCT-5000 antenna is 3 dBi, the radiation characteristic is omni-directional. This makes this antenna suitable for machine-to-machine communication in production environments or for unbtrusive outdoor access points or client terminals. Another range of application is the installation on vehicles (forklifts) or on systems used in public events.

Also available as 2.4GHz version with 2 dBi gain, cable 3m RG-174.

Order No.
18608 HCT-2400 2.4GHz 2 dBi, Nylon M2M Antenna 33.40 € Add to shopping cart
18608.5 HCT-5000 5GHz 3 dBi, Nylon M2M Antenna 40.30 € Add to shopping cart
Info freight charges
Data sheet HCT-2400 Antenna (PDF, EN, 1335KB)
Data sheet HCT-5000 Antenna (PDF, EN, 27KB)

18717 - 2-way MIMO Omnidirectional Antenna Wifi 5 GHz (802.11an, 802.11ac)

18717 Omni MIMO 5GHz 18717

5GHz Omni-directional antenna with two separate antenna systems with each 12 dBi gain! Linear polarization, suitable for all 2R2T MIMO accesspoints or routersworking on 5 GHz (802.11an, 802.11ac). Using a MIMO system resuklts in better data throughput and a more robust radio connection. The antenna is supplied with mounting material for mast installation and is used for illumination of warehouses, offices, concert halls or open spaces. Two N female conenctors on cable. Weatherproof, outdoor suitable, height approx. 50 cm, weight approx. 1 kg.

Order No.
18717 2-fach MIMO Omni-Directional 802.11ag/802.11ac 5 GHz 89.00 € Add to shopping cart
Info freight charges
Download: Data sheet 18717 (PDF, DE/EN, 617KB)

5GHz Directional antennas

5GHz Flat panel antenna PA-5000-18/-21

Flat panel antennas for 5GHz. Due to the relatively small HPBW this antenna is most suitable for point-to-point comunications. Incl. aluminium and stainless steel mast mount hardware, tiltable. Can be mounted for vertical or horizontal polarisation. Temperature range -30 to +60°C.

Bild PA-500-23 PA-5000-23
Bild Flachantenne PA-5000-18
Model PA-5000-12 PA-5000-18 PA-5000-23
Frequency Range 5100 - 5850 MHz 5150 - 5825 MHz 5100 - 5825 MHz
Gain 14 dBi 18 dBi 23 dBi
HPBW hor. 43° 20° 16°
HPBW vert. 30° 18° 16°
Impedance 50Ω 50Ω 50Ω
Connector N Buchse N Buchse N Buchse
Max. Power 50 W 20 W 10 W
Mast Diameter 40 - 50mm 35 - 50mm
Dimensions 125 x 97 x 30mm 330 x 295 x 35mm 322 x 322 x 12mm
Weight 220g 1100g 1360g
Order No. 18710.12 18710.18 18710.23
Price 74.80 € 102.40 € 151.80 €
Add to shopping cart Add to shopping cart Add to shopping cart
In stock, shipped in 1 or two days. In stock, shipped in 1 or two days. In stock, shipped in 1 or two days.

5GHz Sector antennas 15/16 dBi


Professional sector antennas 5GHz for indoor or outdoor use. Used for illumination of large areas like hotspots, halls, yards etc. Horizontal HPBW 90 or 120°, N female connector. The included mounting hardware allows a downtilt of up to 15° (see pictures).
With several of these sector antennas (e.g. 3x 120° or 4x90°) a high performance omni directional antenna can be constructed, allowing to adjust each sector angle individualle. Ideally each of these antennas would be powered by an own AP, but it is also possible to combined several antennas with a power splitter.

Model SAK50-120-14 SAK50-120-16
Gain 14 dBi 16 dBi
HPBW hor. 120° 120°
HPBW vert. 10°
Polarisation Vertikal Vertikal
Dimensions 550 x 131 x 70mm 630 x 131 x 70mm
Weight 1150g 1450g
Order No. 18735.14 18735.16
Price 135.70 € 95.00 €
Add to shopping cart Add to shopping cart
In stock, shipped in 1 or two days. In stock, shipped in 1 or two days.
Data sheet SAK50-120-14 (PDF, de/en, 500KB)
Data sheet SAK50-120-16 (PDF, de/en, 500KB)

5GHz 3-way MIMO Sector antenna 802.11an, 802.11ac


The 5GHz MIMO sector antenna 18636 is suited for Wifi supply in halls, offices, storage areas and also outdoor areas. The antenna has three separate antenna connectors and supports 802.11an and 802.11ac systems. A suitable access point should also have three antenna connectors to make best use of this antenna. The benefit of the MIMO technology is to have faster throughput (up to 450 MBit/s, depending on AP and client) and a more stable connection even for mobile clients.

The main characteristic of a sector antenna is the relatively wide horizontal and relatively narrow vertical beam width. This results in an illumination which is best suited for large areas, where the antenna is installed to a side or corner of the area. The 5GHz MIMO sector antenna 18636 is weatherproof and can be installed outdoors. A stainless steel mast mount is supplied, this mast mount allows a tilt angle of the antenna. The three antenna sockets are N type.

Technical Data 18636 5GHz MIMO
Frequency Range 5150 – 5850 MHz
Gain 11 dBi
SWR ≤ 2.0
Impedance 50 Ω
Polarisation V / H / V
Max. Power 100 W
Connector 3 × N
Dimensions 266 × 170 × 52 mm
Weight 800 g
Order No.
18636 5GHz MIMO Wifi Antenna 85.00 € Add to shopping cart
Info freight charges
Download: Data sheet 18636 5GHz MIMO Antenna (PDF, DE/EN, 700KB)


VP-165 Wifi Antenne VP-250

Flat pabel antenna for 5.4GHz indoor/outdoor use, includes wall mount.

  • Gain: 12 dBi
  • Size: 92x100x30mm
  • Connector: SMA jack
  • 3 dB angle: 55°
  • Frequency range: 5450-5875 MHz
Order No.
18711.54 5.4GHz 52.20 € Add to shopping cart
Info freight charges
Download: Data sheet VP-250/54 (18711.54) (PDF, EN, 650KB)


Wifi Solid Grid Dish 2.4GHz and 5GHz


The Wifi grid dishes are made from casted aluminium and combine a high stability and low wind load for a long endurance of the antennas. The carefully designed parabolic dish offer a gain of 24 dBi on 2.4GHz and 31 dBi on 5GHz. In contrast to other parabolic dishes these antennas are designed for best performance also on 5GHz.
Due to the split construction of the reflector (90x70cm) the shipping size is very small, very facorable for the shipping ost. A tilt/swivel mount for mast mounting is included. Connector N female.

Technical Data
Frequency Range 2.4-2.48 5.1-5.85 GHz
Gain 24 31 dBi
HPBW 8/12° 4/6°
Max. Wind Velocity 160 160 km/h max.
Max. Mast Diameter 50 50 mm
Order No. 18686.24 18686.5
Price 75.00 € 85.00 €
Add to shopping cart Add to shopping cart
In stock, shipped in 1 or two days. In stock, shipped in 1 or two days.
Download: Data sheet 18686.24 (PDF, EN, 620KB)
Download: Data sheet 18686.5 (PDF, EN, 620KB)

Equipment antennas 5GHz

Equipment antennas with SMA connector, available with other connectors upon request. Frequency range: UNII, ISM (5725 - 5825 MHz)

Frequency Range 5.5 - 5.8 GHz 5.2 - 5.5 GHz 5.1 - 5.5 GHz (SMA)
4.9 - 5.9 GHz (RP-SMA)
5.1 - 5.8 GHz 5.1 - 5.8 GHz
Length 10.5cm 17cm 20cm (SMA)
13.7cm (RP-SMA)
29.9cm 39cm
Gain 3 dBi 5 dBi 5 dBi 7 dBi 9 dBi
Knuckle No No Yes Yes Yes
Order No.
SMA Connector
13.60 €
15.90 €
15.90 €
18.20 €
20.50 €
Order No.
RP-SMA Connector
15.90 €
20.50 €
Order No.
N Connector
- 18720.5N
18.10 €
- - -
Order No.
18720.3 3 dBi, 5.5 – 5.8 GHz, SMA 13.60 € Add to shopping cart
18720.5 5 dBi, 5.2 – 5.5 GHz, SMA 15.90 € Add to shopping cart
18722.5 5 dBi, 5.1 – 5.5 GHz, SMA, Knuckle 15.90 € Add to shopping cart
18722.5RSMA 5 dBi, 4.9 – 5.9 GHz, RP-SMA, Knuckle 15.90 € Add to shopping cart
18720.5N 5 dBi, 5.2 – 5.5 GHz, N 18.10 € Add to shopping cart
18722.7 7 dBi, 5.1 – 5.8 GHz, SMA, Knuckle 18.20 € Add to shopping cart
18722.9 9 dbi, 5.1 – 5.8 GHz, SMA, Knuckle 20.50 € Add to shopping cart
18722.9RSMA 9 dbi, 5.1 – 5.8 GHz, RP-SMA, Knuckle 20.50 € Add to shopping cart
Info freight charges

Regulatory information 5GHz (Germany)

For germany several frequency allocations exist in the 5GHz range. For details please refer to "Frequenznutzungsplan nach §46 TKG" respectively "Verordnung 35/2002 (Hg.: RegTP)".

Wireless LAN frequencies in the 5GHz range are shared with other users, among others airports, satellite uplinks, military etc. For this reason we would kindly ask our customers to stick to the rules of use (max. power, indoor/outdoor use etc.) for this frequency range! If in doubt please check the specs of the WLAN device you use. Quote from the German "Frequenznutzungsplan": "Other radio applications within the frequency ranges 5150 - 5350 MHz and 5470 - 5725 MHz, especially satellite and RADAR applications must not be interfered with."

5150 to 5350 MHz (HiperLan)

  • Max. equivalent isotropic radiated power EIRP 200mW
  • Usage only indoors
  • Devices must support automatic power adjustement
  • Devices must support dynamic frequency selection
  • If dynamic frequency selection is supported, but not autom. power adjustment: max 60mW EIRP
  • If neither dynamic frequency selection nor autom. power adjustment is supported: max. 30mW EIRP

5470 to 5725 MHz (HiperLan)

  • Max. equivalent isotropic radiated power EIRP 1W
  • Usage indoors or outdoors
  • Devices must support automatic power adjustement
  • Devices must support dynamic frequency selection

5725 to 5825 MHz (UNII, ISM)

This frequency range is used by the WLAN standard 802.11a, it conforms to ISM frequency ranges used in the US and internationally.

  • Max. equivalent isotropic radiated power EIRP 25mW